# Heat

Energy carried by the jostling of atoms and molecules: released by burning fuels, nuclear reactions and sunlight, moved through steam, water and air, and used for warmth, cooking and industrial processes.

Source page: https://www.materialinsights.org/energy/heat/

Energy carriers · No. 141

- Energy carrier
 Energy carriers · Foundation · Energy

Energy carried by the jostling of atoms and molecules: released by burning fuels, nuclear reactions and sunlight, moved through steam, water and air, and used for warmth, cooking and industrial processes.

Chart: Illustration: Heat

##### Go deeper pick a tab to open it in full

#### Technologies and products that use this

The 200 technologies and products whose tabs name Heat, by what each one does with it. Open one for its full story.
 Embodied in 14

- [Aqd Aqueduct](https://www.materialinsights.org/technologies/aqueduct/) Lime for the mortar was made by burning limestone in kilns.
- [CSB Cable-stayed bridge](https://www.materialinsights.org/technologies/cable_stayed_bridge/) Steelmaking and cement kilns, which make the stays, decks and towers, run on high-temperature heat.
- [WC Cemented carbide](https://www.materialinsights.org/technologies/cemented_carbide/) Pressed parts are sintered to full density slightly above the eutectic temperature, so each tool carries the heat of that firing.
- [EmE Embodied energy trade](https://www.materialinsights.org/technologies/e_embodied/) Process heat for cement and steel is part of the energy those goods carry; both are covered by the EU border mechanism.
- [Rd Engineered roads](https://www.materialinsights.org/technologies/engineered_roads/) Modern asphalt is mixed and laid hot, and cement is made in kilns, so a road carries embodied fuel energy.
- [Flu Flush toilet with water trap](https://www.materialinsights.org/technologies/flush_toilet/) Ceramic bowls are fired in kilns, so each toilet carries embodied heat energy.
- [Gth Rib vault and flying buttress](https://www.materialinsights.org/technologies/gothic_rib_vault/) Lime for mortar and glass for windows needed kiln and furnace heat.
- [PB Gypsum plasterboard](https://www.materialinsights.org/technologies/gypsum_plasterboard/) Gypsum is heated to drive off its water and make plaster, and the wet boards are dried in ovens.
- [SBr Iron suspension bridge](https://www.materialinsights.org/technologies/iron_suspension_bridge/) Furnaces and forges burned coal and coke to make and shape the wrought iron.
- [Mac Macadam and tarmac roads](https://www.materialinsights.org/technologies/macadam_road/) Tar and bitumen are heated before they are mixed with the stone and laid.

Show 4 more

- [Arc Masonry arch](https://www.materialinsights.org/technologies/masonry_arch/) Fired bricks and lime mortar need kiln heat.
- [Dme Large masonry dome](https://www.materialinsights.org/technologies/pendentive_dome/) Lime kilns and brick kilns burned fuel to make the binder and the bricks.
- [Rly Railway (iron track network)](https://www.materialinsights.org/technologies/railway_track_system/) Steel rails and cement for sleepers and bridges are made with high-temperature heat, which the track carries as embodied energy.
- [RC Hydraulic concrete (pozzolanic)](https://www.materialinsights.org/technologies/roman_concrete/) The heat used to burn limestone into quicklime is the main energy in the concrete.
 Energy to make 18

- [Aluminium can](https://www.materialinsights.org/products/p_aluminium_can/) 1.18 MJ · Materials Average can Calculated: cradle-to-gate primary energy of 1,320 MJ per 1,000 North American cans of 13.46 kg, all carriers, from ore to finished can, scaled to a 12 g can. It includes the smelting electricity above, so the two rows must not be added. Cradle to grave, including end-of-life processing and the debit for replacement metal, the study gives 1,630 MJ per 1,000 cans, about 1.45 MJ per 330 ml can (calculated).
- [Corrugated box](https://www.materialinsights.org/products/p_corrugated_box/) 1.81 MJ · Materials Fossil fuels, 4.515 GJ per t x 0.4 kg (calculated). FEFCO does not split them by fuel; across all European pulp and paper mills, gas was 29.2% of fuel and coal 1.3% in 2024. Includes steam for the corrugator, not split out.
- [Electric generator](https://www.materialinsights.org/products/p_electric_generator/) 264,600 MJ · Manufacturing Synchronous (ABB GBA 1120, 31 MW) 73,500 kWh of heat, converted at 3.6 MJ per kWh (calculated); the declaration's table columns are not clearly aligned.
- [Glass container](https://www.materialinsights.org/products/p_glass_container/) 1.38 MJ · Manufacturing Low-cullet batch Calculated: EU container glass averages 5.8 GJ per tonne, taken as the level at the European average cullet of 52%; each 10 points of cullet changes furnace energy by 2.5%. At 20% cullet: plus 32 points x 2.5% / 10 points = 8% more, so 5.8 GJ/t x 1.08 = 6.26 GJ/t (= MJ/kg) x 0.220 kg = 1.38 MJ per bottle. JRC does not say whether 5.8 GJ/t is melting only; forming, annealing and compressed air are probably not included.
- [Insulating glass unit](https://www.materialinsights.org/products/p_insulating_glass_unit/) 624 MJ · Manufacturing Argon low-e double Calculated: renewable 45.6 plus non-renewable 578 MJ primary energy per m2, cradle to gate (A1 to A3). The EPD gives primary energy, not fuel and electricity separately.
- [Lithium-ion battery](https://www.materialinsights.org/products/p_lithium_ion_battery/) 140 MJ · Manufacturing NMC Steam per kWh of cells on the same line. With electricity this is 170 MJ, about 47 kWh (calculated). A 2023 Nature Energy study puts today's cell-making energy at 20 to 40 kWh (72 to 144 MJ, calculated) per kWh, by battery type and excluding materials; the 2019 figure for one line sits above that range, mostly because of steam.
- [Memory chip](https://www.materialinsights.org/products/p_memory_chip/) 1.6 MJ · Manufacturing Fossil fuels burnt on site for the same chip (calculated: 1 MJ per cm2 x 1.6 cm2).
- [Mineral wool insulation](https://www.materialinsights.org/products/p_mineral_wool_insulation/) 114 MJ · Manufacturing Stone wool Midpoint of 76 to 153 MJ per m2 at 100 mm (calculated): 7 to 14 GJ per tonne for stone and slag wool times 10.9 kg. Fuels are coke and gas in cupolas, or electricity.
- [PET bottle](https://www.materialinsights.org/products/p_pet_bottle/) 0.99 MJ · Materials Virgin PET bottle Calculated: 70 to 83 MJ per kg of PET resin, taken at 76.5 and multiplied by the 0.0129 kg body. Primary energy of all carriers; Shen et al, citing PlasticsEurope, give 68.6 MJ per kg for bottle-grade PET.
- [Plastic foam insulation board](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/) 311 MJ · Materials EPS Calculated: total primary energy A1 to A3 of the 24 kg/m3 declaration, 44.4 MJ renewable (TPE) plus 67.7 MJ non-renewable (TRPE) = 112.1 MJ per m2 at R = 1 (36 mm), times 100/36 gives about 311 MJ (about 86 kWh) per m2 at 100 mm. It includes the energy content of the plastic itself.

Show 8 more

- [Printed circuit board](https://www.materialinsights.org/products/p_printed_circuit_board/) 105 kWh · Manufacturing Rigid six-layer Heat in the same ecoinvent six-layer entry.
- [Silicon wafer](https://www.materialinsights.org/products/p_silicon_wafer/) 0.16 kWh · Manufacturing Solar wafer Per M10 wafer, calculated: 8 kWh of thermal energy per kg of solar-grade silicon times 0.0201 kg.
- [Solar PV cell](https://www.materialinsights.org/products/p_solar_pv_cell/) 0.08 MJ · Materials Heat for polysilicon, 28.8 MJ per kg, calculated per watt as above
- [Steel reinforcing bar](https://www.materialinsights.org/products/p_steel_reinforcing_bar/) 25,200 MJ · Manufacturing Blast furnace Specific energy consumption of Indian BF-BOF TMT rebar, 25.20 GJ per tonne, all carriers (RMI Exhibit 14, 2024 values); converted to MJ (calculated). Tata Steel's EPD gives 26,500 MJ of non-renewable primary energy (energy carriers) cradle to gate
- [Transformer and power converter](https://www.materialinsights.org/products/p_transformer_and_power_converter/) 170,640 MJ · Manufacturing Power transformer (40 MVA, oil-immersed) 47,400 kWh of heat, converted at 3.6 MJ per kWh (calculated).
- [Variable speed drive](https://www.materialinsights.org/products/p_variable_speed_drive/) 20.7 kWh · Manufacturing Calculated, rough: 0.56 kWh per kW of rated power in the same 7.5 kW ABB declaration, times 37 kW.
- [Vehicle transmission](https://www.materialinsights.org/products/p_vehicle_transmission/) 164 MJ · Manufacturing Battery electric (single-speed) Heat to manufacture the same transmission (Table 4).
- [Wind turbine tower](https://www.materialinsights.org/products/p_wind_turbine_tower/) 7.35 million MJ · Materials Tubular steel Calculated: 351 tonnes of steel times the 2024 global average of 20.95 GJ per tonne of crude steel, about 7,350 GJ (about 2,040 MWh). The range runs from 3,450 GJ for scrap-based arc furnace steel (9.84 GJ/t) to 8,380 GJ for blast furnace steel (23.88 GJ/t). It covers crude steel only, not rolling, welding or coating, and mixes coal, gas and electricity, so it sits under heat.
 Energy in use

- [Insulating glass unit](https://www.materialinsights.org/products/p_insulating_glass_unit/) -223 kWh per year · lifetime 30 years Air-filled double Upper bound, calculated: heat saved per m2 against single glass, EU average climate: (5.8 minus 2.9) W/m2K x 3,199 heating degree days (K day, base 18 degrees Celsius, EU average of 42 years of data) x 24 h = 223 kWh. It ignores solar gain and frames, and centre-of-glass U-values are better than whole windows.
- [Mineral wool insulation](https://www.materialinsights.org/products/p_mineral_wool_insulation/) -243 kWh per year · lifetime 50 years Calculated, 100 mm stone wool on an uninsulated solid wall: (1) R added = 0.100 m / 0.036 W/(m K) = 2.78 m2K/W; (2) baseline U0 = 2.1 W/m2K, the typical UK solid wall value, so R0 = 1/2.1 = 0.476 m2K/W; (3) U1 = 1 / (0.476 + 2.78) m2K/W = 0.307 W/m2K; (4) saving 2.1 minus 0.307 = 1.79 W/m2K; (5) 1.79 W/m2K x 5,656 K day per year (Finland's 1979 to 2022 average heating degree days, base 18 degrees Celsius) x 24 h per day = 243,000 Wh = about 243 kWh per m2 per year; about 12,200 kWh over 50 years. Negative means energy saved.
- [Plastic foam insulation board](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/) -243 kWh per year · lifetime 50 years EPS Calculated for 100 mm on an uninsulated solid wall in Finland: R added = 0.100 / 0.036 = 2.78 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls, so R0 = 0.476; U1 = 1/(0.476 + 2.78) = 0.307; saving 1.79 W/m2K times 5,656 K day per year times 24 h = about 243 kWh per m2 a year. Negative means heat saved.
 Powers 56

- [Abx Antibiotics](https://www.materialinsights.org/technologies/antibiotics/) Steam sterilises fermentation tanks and broth before each batch.
- [ART Combination antiretroviral therapy](https://www.materialinsights.org/technologies/antiretroviral_therapy/) Chemical synthesis of the active ingredients uses process heat and steam.
- [Asp Antisepsis and sterile surgery](https://www.materialinsights.org/technologies/antisepsis/) Steam under pressure is the standard way to sterilise instruments.
- [UHT Aseptic packaging (UHT)](https://www.materialinsights.org/technologies/aseptic_processing/) Steam injection or infusion, or heat exchangers, raise the product above 135 °C.
- [Bk Bakelite (phenolic resin)](https://www.materialinsights.org/technologies/bakelite_phenolic_resin/) The resin is set by heating it under pressure in a mould.
- [Bay Bayer alumina process](https://www.materialinsights.org/technologies/bayer_process/) Alumina refineries burnt about 1.19 million TJ of fuel in 2024 for digestion and calcination.
- [BF Blast furnace and cast iron](https://www.materialinsights.org/technologies/blast_furnace/) The furnace runs hot and continuously for long periods.
- [Brz Bronze alloying](https://www.materialinsights.org/technologies/bronze_alloying/) Melting and casting are high-temperature heat processes.
- [Can Canning](https://www.materialinsights.org/technologies/canning/) Sterilising sealed cans takes steam or hot water at up to about 121 °C.
- [CCS Carbon capture and storage](https://www.materialinsights.org/technologies/carbon_capture_storage/) Steam heats the loaded solvent to release the carbon dioxide.

Show 46 more

- [CFR Carbon fibre composites](https://www.materialinsights.org/technologies/carbon_fibre_composites/) Stabilisation and carbonisation bake the fibre in long ovens and furnaces.
- [Cel Celluloid (first plastic)](https://www.materialinsights.org/technologies/celluloid/) The celluloid dough is shaped by pressing it in a heated mould.
- [Cok Coke ironmaking](https://www.materialinsights.org/technologies/coke_ironmaking/) Coke ovens and the furnace run continuously at high temperature.
- [Sm Copper smelting](https://www.materialinsights.org/technologies/copper_smelting/) Smelting and fire refining are high-temperature heat processes.
- [Gin Cotton gin](https://www.materialinsights.org/technologies/cotton_gin/) Seed cotton is dried before ginning in heated air.
- [CLT Cross-laminated timber](https://www.materialinsights.org/technologies/cross_laminated_timber/) Kiln drying the boards before gluing is the main energy use in making panels.
- [Wtz Crucible steel](https://www.materialinsights.org/technologies/crucible_steel/) The furnace had to reach about 1,600 °C to melt the steel.
- [DAC Direct air capture](https://www.materialinsights.org/technologies/direct_air_capture/) Solid sorbents are heated to 80 to 120 °C to release the gas, and liquid systems use units at 300 to 900 °C.
- [DLE Direct lithium extraction](https://www.materialinsights.org/technologies/direct_lithium_extraction/) Warm water is used to wash lithium off the loaded sorbent.
- [DRI Direct reduction of iron](https://www.materialinsights.org/technologies/direct_reduced_iron/) The reducing gas is heated to above about 930 degrees Celsius.
- [Ds Distillation](https://www.materialinsights.org/technologies/distillation/) Every stage of distillation is driven by heat at the bottom of the column.
- [TCB Thermochemical biomass conversion](https://www.materialinsights.org/technologies/e_bio_thermochem/) The reactor must be held at about 290 to 800 °C depending on the route.
- [DHN District heating and cooling networks](https://www.materialinsights.org/technologies/e_district_heat_net/) Networks take heat from plants burning coal, waste or biomass, and from surplus industrial heat.
- [H2T Hydrogen and hydrogen carriers](https://www.materialinsights.org/technologies/e_h2_transport/) Releasing hydrogen from organic carriers needs heat equal to 30 to 40% of the hydrogen's energy.
- [NaS High-temperature batteries](https://www.materialinsights.org/technologies/e_hightemp_batt/) The cells only work when hot, about 300 C, so heat must be supplied or retained.
- [Fac Factory system](https://www.materialinsights.org/technologies/factory_system/) Many factories need process heat for drying, melting, curing and cooking.
- [FG Float glass](https://www.materialinsights.org/technologies/float_glass/) Melting the batch takes most of the energy; the furnace is normally kept between 1,500 and 1,600 degrees Celsius.
- [Gl Glassmaking](https://www.materialinsights.org/technologies/glassmaking/) Melting is a continuous high-temperature heat process.
- [Gr Graphene](https://www.materialinsights.org/technologies/graphene_production/) Single layers are grown on copper in a high-temperature furnace.
- [HB Haber-Bosch ammonia synthesis](https://www.materialinsights.org/technologies/haber_bosch_process/) Steam reforming and the synthesis loop run hot; the sector uses about 2% of world final energy.
- [Lin Hot-metal typesetting](https://www.materialinsights.org/technologies/hot_metal_typesetting/) Every line is cast from molten lead, so the metal pot is kept hot all day.
- [ISRU In-situ resource utilisation](https://www.materialinsights.org/technologies/in_situ_resource_utilisation/) Feedstock is heated to about 800 degrees Celsius before splitting.
- [Fe Iron smelting (bloomery)](https://www.materialinsights.org/technologies/iron_smelting/) The furnace must be held hot for hours to reduce the ore and weld the iron.
- [Krl Kroll process (titanium)](https://www.materialinsights.org/technologies/kroll_process/) The reduction retort is heated to 800 to 900 degrees Celsius.
- [Lbl Leblanc soda process](https://www.materialinsights.org/technologies/leblanc_process/) Both stages run in hot furnaces.
- [Lm Lime burning](https://www.materialinsights.org/technologies/lime_burning/) Kilns run at 900 to 1,200 °C and use 3.6 to 9.2 GJ of fuel per tonne depending on type.
- [Rcy Battery recycling (hydrometallurgical)](https://www.materialinsights.org/technologies/lithium_battery_recycling/) Leaching tanks are warmed and the salt products are dried.
- [Cst Metal casting (lost wax)](https://www.materialinsights.org/technologies/lost_wax_casting/) Every casting starts with melting metal, and lost-wax moulds are also heated to drive out the wax.
- [mAb Monoclonal antibodies](https://www.materialinsights.org/technologies/monoclonal_antibodies/) Steam sterilises equipment between production batches.
- [MT Movable type](https://www.materialinsights.org/technologies/movable_type/) Type is cast from molten metal, and clay type was hardened by baking.
- [Ny Nylon (polyamide synthesis)](https://www.materialinsights.org/technologies/nylon_synthesis/) Polymerisation and melt spinning run at high temperature, so heat is the main energy input of the plant.
- [PM Continuous paper machine](https://www.materialinsights.org/technologies/paper_machine/) Steam for the dryer section takes more than 60% of a paper mill's energy.
- [Ppr Papermaking](https://www.materialinsights.org/technologies/papermaking/) Drying the wet sheet is the main energy use.
- [Pst Pasteurisation](https://www.materialinsights.org/technologies/pasteurisation/) Hot water or steam heats the milk to pasteurising temperature.
- [Por Porcelain](https://www.materialinsights.org/technologies/porcelain/) True porcelain is fired above 1,200 to 1,300 °C.
- [PC Portland cement](https://www.materialinsights.org/technologies/portland_cement/) The kiln runs at about 1,450 °C.
- [Pot Fired pottery](https://www.materialinsights.org/technologies/pottery_firing/) Firing is a heat process from start to finish.
- [PFm Precision fermentation](https://www.materialinsights.org/technologies/precision_fermentation/) The concentrated protein is spray dried to a powder, a heat-driven step.
- [Pud Puddling (wrought iron)](https://www.materialinsights.org/technologies/puddling_process/) The flame from the grate plays over the iron to melt it.
- [rDNA Recombinant DNA (genetic engineering)](https://www.materialinsights.org/technologies/recombinant_dna/) Steam is used to sterilise equipment between production batches.
- [Slv Solvay soda process](https://www.materialinsights.org/technologies/solvay_process/) Thermal energy is one of the three major inputs, with salt and limestone.
- [Spc Spectroscope](https://www.materialinsights.org/technologies/spectroscope/) Flame analysis heats a sample until it glows in its own colours, as in Bunsen's experiments with flame colouring.
- [Asa Synthetic drugs (medicinal chemistry)](https://www.materialinsights.org/technologies/synthetic_drugs/) Reactions, distillation of solvents and drying of products need process heat.
- [Dye Synthetic dyes](https://www.materialinsights.org/technologies/synthetic_dyes/) Dye synthesis and the dyeing of textiles both need hot reactors and dye baths.
- [SR Synthetic rubber](https://www.materialinsights.org/technologies/synthetic_rubber_process/) The GR-S emulsion reaction ran at 41 °C, so the reactors were held at a set warm temperature.
- [Vul Vulcanisation of rubber](https://www.materialinsights.org/technologies/vulcanisation/) Goodyear's discovery is said to have come from sulphur-treated rubber dropped on a hot stove; curing still needs heat.
 Converted by 22

- [Bal Balloon flight](https://www.materialinsights.org/technologies/balloon_flight/) The burner's heat expands the air inside the envelope and so produces the lift.
- [BOS Basic oxygen steelmaking](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/) Oxidising carbon and silicon heats the bath enough to melt added scrap.
- [Bes Bessemer process](https://www.materialinsights.org/technologies/bessemer_process/) Burning carbon and silicon in the iron raises its temperature and keeps it molten.
- [Ctp Contact process (sulphuric acid)](https://www.materialinsights.org/technologies/contact_process/) Absorbing sulphur trioxide releases so much heat that it is done in strong acid rather than water.
- [Bag Bagasse and black-liquor cogeneration](https://www.materialinsights.org/technologies/e_bio_cogen/) Low-pressure steam leaving the turbine supplies the mill's process heat.
- [BmC Biomass combustion and CHP](https://www.materialinsights.org/technologies/e_bio_combustion/) Combined heat and power plants deliver steam or hot water as well as power.
- [Bld Energy in buildings](https://www.materialinsights.org/technologies/e_buildings/) Buildings turn fuel and electricity into heat; renewables met 16% of it in 2024.
- [LPG CNG, LPG and biogas distribution](https://www.materialinsights.org/technologies/e_cng_lpg/) Most LPG and biogas is burned for heat, above all for cooking, the main use for about 3.4 billion people.
- [Blr Boilers, furnaces and stoves](https://www.materialinsights.org/technologies/e_combustion_heat/) Heat for all uses was almost half of world final energy in 2024.
- [EH Electric heating](https://www.materialinsights.org/technologies/e_electric_heat/) Electricity becomes heat in an element, a pan, a charge of scrap steel or the water in food.

Show 12 more

- [NFR Nuclear fission reactors](https://www.materialinsights.org/technologies/e_fission/) The core turns the energy released by splitting nuclei into heat in the coolant.
- [Fus Fusion reactors](https://www.materialinsights.org/technologies/e_fusion/) A plant would turn fusion neutrons into heat in its blanket, then into electricity.
- [GSH Geothermal direct use and ground-source heat pumps](https://www.materialinsights.org/technologies/e_geo_direct/) The system delivers heat for space heating, bathing, greenhouses, aquaculture and drying.
- [HP Heat pumps, air conditioning and refrigeration](https://www.materialinsights.org/technologies/e_heat_pumps/) The machine delivers heat to rooms and water, or removes it from a cold space and dumps it outside.
- [Exp Explosives and propellants](https://www.materialinsights.org/technologies/e_propellants/) The reaction turns stored chemical energy into heat and hot gas, whose pressure does the work, the link between heat and work that Joule measured.
- [SHC Solar heat collectors](https://www.materialinsights.org/technologies/e_solar_heat/) Collectors deliver heat up to about 120 °C for buildings and industrial processes.
- [ST Steam turbines and thermal power plants](https://www.materialinsights.org/technologies/e_steam_turbines/) The turbine turns heat carried by steam into shaft work.
- [WtE Waste-to-energy](https://www.materialinsights.org/technologies/e_waste_to_energy/) Burning waste releases heat that converts water to steam.
- [EAF Electric arc furnace](https://www.materialinsights.org/technologies/electric_arc_furnace/) The arcs turn electrical energy into the heat that melts the charge.
- [RTG Radioisotope thermoelectric generator](https://www.materialinsights.org/technologies/radioisotope_power/) Decay heat is turned straight into electricity by thermocouples, and most of it is rejected to space or used to warm the craft.
- [Stm Steam engine](https://www.materialinsights.org/technologies/steam_engine/) The engine turns heat into mechanical work and rejects the rest to a condenser or the air.
- [TC Thermocouple](https://www.materialinsights.org/technologies/thermocouple/) The junction turns a small amount of heat into an electrical signal by the Seebeck effect.
 Stored by 7

- [CB Carnot batteries](https://www.materialinsights.org/technologies/e_carnot/) The energy is held as heat in rock, sand or salt stores between charging and discharging.
- [HTF Heat-transfer fluids and heat pipes](https://www.materialinsights.org/technologies/e_heat_carriers/) At Solar Two the molten salt that carried the heat was also the storage medium.
- [PCM Latent heat and cold storage](https://www.materialinsights.org/technologies/e_latent_heat/) Phase change materials absorb, store and release heat nearly at one temperature.
- [NR Natural reservoirs](https://www.materialinsights.org/technologies/e_natural_stores/) Aquifer thermal energy storage keeps seasonal heat and cold in groundwater.
- [SHS Sensible heat storage](https://www.materialinsights.org/technologies/e_sensible_heat/) The store banks heat for hours in a tank or for a season in a pit, as at Vojens.
- [TCS Thermochemical storage](https://www.materialinsights.org/technologies/e_thermochem_store/) Holds heat as chemical energy with almost no loss over months.
- [MB Mud brick](https://www.materialinsights.org/technologies/mud_brick/) Heavy earth walls soak up heat by day and give it back at night.
 Lost by 72

- [Asf Asphalt concrete paving](https://www.materialinsights.org/technologies/asphalt_paving/) Much of the burner heat leaves with the exhaust and the cooling mix.
- [AWH Atmospheric water harvesting](https://www.materialinsights.org/technologies/atmospheric_water_harvesting/) Condensing the vapour gives off its latent heat, which is shed to the surrounding air.
- [BC Blockchain ledger](https://www.materialinsights.org/technologies/blockchain_ledger/) The electricity used by mining machines ends as heat that has to be removed from the mining sites.
- [ClA Chlor-alkali electrolysis](https://www.materialinsights.org/technologies/chlor_alkali_process/) The part of the cell voltage above the minimum for the reaction ends up as heat in the cell.
- [Cld Cloud computing](https://www.materialinsights.org/technologies/cloud_computing/) Server electricity ends as heat that cooling systems must remove.
- [CNC Numerical control machining](https://www.materialinsights.org/technologies/cnc_machining/) Nearly all cutting work ends as heat in the chips, tool and coolant.
- [CTs Computed tomography](https://www.materialinsights.org/technologies/ct_scanner/) Most of the electrical energy fed to the X-ray tube ends up as heat in the tungsten target, which must be cooled.
- [Cz Czochralski crystal growth](https://www.materialinsights.org/technologies/czochralski_process/) Heat that melts the charge is later released as the crystal freezes and cools and is carried away by the furnace cooling.
- [DL Deep learning](https://www.materialinsights.org/technologies/deep_neural_networks/) The energy used by AI chips ends as heat that data-centre cooling must remove.
- [RAM Dynamic random-access memory](https://www.materialinsights.org/technologies/dram/) The energy used for switching and refreshing ends as heat in the memory modules.

Show 62 more

- [AGS Advanced geothermal](https://www.materialinsights.org/technologies/e_adv_geo/) Most of the heat in the produced water is rejected by the power cycle or returned underground.
- [Jet Aviation propulsion](https://www.materialinsights.org/technologies/e_aviation/) Most of the fuel's energy leaves in the hot exhaust and the wake behind the aircraft.
- [BmC Biomass combustion and CHP](https://www.materialinsights.org/technologies/e_bio_combustion/) Electricity-only plants reject most of the fuel's heat in the condenser and flue gas.
- [CAES Compressed-air and CO2 storage](https://www.materialinsights.org/technologies/e_caes/) In diabatic plants the compressed air is cooled to ambient temperature before storage, throwing away the heat of compression.
- [CSP Concentrated solar power](https://www.materialinsights.org/technologies/e_csp/) Most of the collected heat leaves through the steam cycle's condenser and cooling system.
- [DC Data centres](https://www.materialinsights.org/technologies/e_data_centres/) All the electricity ends as low-temperature heat, most of it released to the air.
- [NH3 Ammonia, methanol and e-fuels](https://www.materialinsights.org/technologies/e_efuels_store/) About 40 to 45% of the electricity is lost, largely as heat, in making ammonia (calculated from the 55 to 60% production efficiency).
- [Elz Electrolysers](https://www.materialinsights.org/technologies/e_electrolysers/) Voltage above what the reaction needs leaves the stack as heat, removed by cooling.
- [ICE Internal combustion engines and gensets](https://www.materialinsights.org/technologies/e_engines/) Most of the fuel energy leaves as heat in the exhaust and the cooling water.
- [EV Electric and hybrid vehicles](https://www.materialinsights.org/technologies/e_evs/) Losses in the battery, inverter and motor leave as heat.
- [NFR Nuclear fission reactors](https://www.materialinsights.org/technologies/e_fission/) About two thirds of reactor heat is rejected, almost all of it to condenser cooling water rather than a stack.
- [Fly Flywheels and small mechanical stores](https://www.materialinsights.org/technologies/e_flywheels/) Bearing and drag losses turn some stored motion into heat while the rotor spins.
- [FC Fuel cells](https://www.materialinsights.org/technologies/e_fuel_cells/) The rest of the fuel energy, about 40% in a PEM cell (calculated from its 60% efficiency), leaves as heat, which stationary units can use for heating.
- [CCGT Gas turbines and combined cycle](https://www.materialinsights.org/technologies/e_gas_turbines/) Hot exhaust and condenser heat carry away the energy not turned into power.
- [Gen Generators and alternators](https://www.materialinsights.org/technologies/e_generators/) Losses in windings, iron and bearings leave as heat carried off by hydrogen, water or air.
- [GeP Geothermal power plants](https://www.materialinsights.org/technologies/e_geo_power/) Most of the heat in the produced fluid is rejected in condensers or returned underground, as the Carnot limit for moderate temperatures implies.
- [H2S Hydrogen storage](https://www.materialinsights.org/technologies/e_h2_storage/) Compression heats the gas and cooling it rejects heat, one reason practical compression needs more than the ideal work.
- [HI Energy-intensive industry](https://www.materialinsights.org/technologies/e_heavy_industry/) Hot gases, slag and products carry away much of the energy put in.
- [LED Lighting and displays](https://www.materialinsights.org/technologies/e_lighting/) Energy not turned into light leaves as heat, most of all from filament lamps.
- [Shp Ship propulsion](https://www.materialinsights.org/technologies/e_marine/) Much of the fuel's energy leaves as hot exhaust and in the cooling water.
- [MPT Mechanical power transmission](https://www.materialinsights.org/technologies/e_mechanical_transmission/) US fluid power ran at an average 22% efficiency in 2008, so most of the input ended as heat.
- [Mot Electric motors and drives](https://www.materialinsights.org/technologies/e_motors/) Winding resistance, iron losses and friction leave the motor as heat.
- [OGw Conventional oil and gas production](https://www.materialinsights.org/technologies/e_oil_gas_conv/) Gas flared at the wellhead is burnt for nothing; the IEA calls for eliminating all non-emergency flaring.
- [UOG Unconventional oil and gas](https://www.materialinsights.org/technologies/e_oil_gas_unconv/) Gas flared at wells is burnt for nothing; the IEA calls for eliminating all non-emergency flaring.
- [PE Transformers and power electronics](https://www.materialinsights.org/technologies/e_power_electronics/) Core and winding losses, and switching losses in semiconductors, leave as heat that cooling oil, fans or heat sinks remove.
- [PtX Power-to-X](https://www.materialinsights.org/technologies/e_power_to_x/) About half the input energy leaves as heat, some of it usable for heating.
- [PV Solar photovoltaics](https://www.materialinsights.org/technologies/e_pv/) Photon energy above the band gap is released as heat in the crystal, called thermalisation.
- [Rail Rail traction](https://www.materialinsights.org/technologies/e_rail_traction/) Diesel engines and resistor brakes shed much of their energy as heat.
- [Ref Refining and reforming](https://www.materialinsights.org/technologies/e_refining/) Heat leaves through flue gas, coolers and hot products; the DOE puts plant-wide savings potential around 30%.
- [ICV Combustion road vehicles](https://www.materialinsights.org/technologies/e_road_ice/) Engine losses of 68 to 72% of the fuel energy leave as heat in the exhaust and radiator.
- [Rkt Rockets and human power](https://www.materialinsights.org/technologies/e_rockets/) Much of a rocket's energy leaves in the hot exhaust, and most of a cyclist's food energy becomes body heat.
- [ST Steam turbines and thermal power plants](https://www.materialinsights.org/technologies/e_steam_turbines/) In coal and nuclear steam plants about two thirds of the energy leaves as heat in the condenser cooling water.
- [FW Firewood and charcoal supply](https://www.materialinsights.org/technologies/e_traditional_fuel/) About half of the wood's energy escapes from the kiln as heat and gases.
- [ENI Electronic digital computer](https://www.materialinsights.org/technologies/electronic_computer/) The power ends as heat from tube heaters and circuits, which the rooms had to shed.
- [Fmt Fermentation of food and drink](https://www.materialinsights.org/technologies/fermentation_of_food/) The microbes give off heat as they work.
- [Fl Flash memory](https://www.materialinsights.org/technologies/flash_memory/) The energy used for switching and for the high-voltage write pulses ends as heat.
- [Ger Gear train](https://www.materialinsights.org/technologies/gear_train/) The power lost in a gear mesh, up to 30% in a worm gear, ends as heat in the oil.
- [GPU Graphics processing unit](https://www.materialinsights.org/technologies/graphics_processing_unit/) The energy a GPU uses ends as heat that fans or liquid cooling must remove.
- [Al Hall-Heroult aluminium smelting](https://www.materialinsights.org/technologies/hall_heroult_process/) Much of the electrical energy ends up as heat in the pot, which keeps the bath at about 950 °C and is then lost.
- [HDD Hard disk drive](https://www.materialinsights.org/technologies/hard_disk_drive/) Motor and electronics losses heat the drive, and data centres must cool racks full of them.
- [LDPE High-pressure polyethylene process](https://www.materialinsights.org/technologies/high_pressure_polyethylene/) Polymerisation gives off heat that is carried away by cooling.
- [IM Injection moulding](https://www.materialinsights.org/technologies/injection_moulding/) The heat used to melt the plastic is carried away by the mould's cooling water.
- [IC Integrated circuit](https://www.materialinsights.org/technologies/integrated_circuit/) The energy a chip uses ends as heat, which must be carried away and limits how densely parts can be packed.
- [LLM Large language models](https://www.materialinsights.org/technologies/large_language_models/) The electricity used by AI chips ends as heat that data-centre cooling must remove.
- [Lsr Laser](https://www.materialinsights.org/technologies/laser/) The energy not turned into the beam becomes heat that must be removed by cooling.
- [LCh Lead chamber sulphuric acid process](https://www.materialinsights.org/technologies/lead_chamber_process/) Burning sulphur and oxidising its gas release heat, which the chambers made little use of.
- [CPU Microprocessor](https://www.materialinsights.org/technologies/microprocessor/) The energy a processor uses ends as heat, which fans or liquid cooling must remove.
- [MOS MOSFET](https://www.materialinsights.org/technologies/mosfet/) Switching and leakage turn electricity into heat; cutting wasteful leakage was a reason for hafnium-based gates.
- [MRI Magnetic resonance imaging](https://www.materialinsights.org/technologies/mri_scanner/) Gradient coils and amplifiers turn much of their power into heat, removed by water cooling.
- [PCo Personal computer](https://www.materialinsights.org/technologies/personal_computer/) Almost all the electricity a PC uses ends as heat, removed by fans and heat sinks.
- [Tyr Pneumatic tyre](https://www.materialinsights.org/technologies/pneumatic_tyre/) Each time the rubber flexes it loses a little energy as heat; less deformation means less loss.
- [PCR Polymerase chain reaction](https://www.materialinsights.org/technologies/polymerase_chain_reaction/) The heat put into each cycle is removed again on cooling and lost to the room.
- [Qc Quantum computing](https://www.materialinsights.org/technologies/quantum_computing/) Refrigerators pump heat out of the chip and reject it, with the compressors' own losses, to the room.
- [QF Quick freezing of food](https://www.materialinsights.org/technologies/quick_freezing/) The heat drawn from the food, including the latent heat released as its water freezes, is rejected to the air or cooling water.
- [AB Railway air brake](https://www.materialinsights.org/technologies/railway_air_brake/) All the motion energy taken out by friction braking is lost as heat in wheels, blocks and discs.
- [SBI Seismic base isolation](https://www.materialinsights.org/technologies/seismic_base_isolation/) Energy of the shaking is deliberately turned into heat in the lead core or damping rubber.
- [SPC Stored-program computer](https://www.materialinsights.org/technologies/stored_program_computer/) Almost all the electricity ends as heat that must be removed.
- [Tsr Transistor](https://www.materialinsights.org/technologies/transistor/) Switching and leakage turn electricity into heat, which limits how densely transistors can be packed.
- [UG Underground railway](https://www.materialinsights.org/technologies/underground_railway/) Braking and motors release heat that builds up in deep tunnels, which must be ventilated.
- [VT Vacuum tube (thermionic valve)](https://www.materialinsights.org/technologies/vacuum_tube/) The heater and the plate current turn much of the input power into heat; ENIAC drew 150 kW.
- [Srch Web search engine](https://www.materialinsights.org/technologies/web_search_engine/) The servers' electricity ends as heat that data-centre cooling must remove.
- [Xr X-ray imaging](https://www.materialinsights.org/technologies/x_ray_imaging/) Most of the energy of the electrons ends up as heat in the target, which must be cooled.
 Recovered by 14

- [Eco Boiler heat recovery](https://www.materialinsights.org/technologies/e_boiler_recovery/) Takes heat from boiler flue gas back into feed water or combustion air.
- [HRV Building heat recovery](https://www.materialinsights.org/technologies/e_building_recovery/) Moves heat from outgoing to incoming air; most units recover 70 to 90% of it.
- [CHP Combined heat and power](https://www.materialinsights.org/technologies/e_chp/) Captures the heat that a power plant would otherwise lose.
- [Trb Engine exhaust recovery](https://www.materialinsights.org/technologies/e_engine_recovery/) Takes heat and pressure from exhaust gas at 700 to 1,000°F.
- [HX Heat exchangers and pinch integration](https://www.materialinsights.org/technologies/e_heat_exchangers/) Takes heat that would be lost, which the DOE study puts at 20 to 50% of industrial energy input.
- [MVR Industrial heat pumps and vapour recompression](https://www.materialinsights.org/technologies/e_industrial_hp/) Recycles vapour heat in evaporators and lifts low-temperature heat for processes.
- [ORC Organic Rankine, Kalina and sCO2 cycles](https://www.materialinsights.org/technologies/e_orc/) Takes low-temperature waste heat, for example from two cement kiln lines.
- [Pas Passive solar and natural cooling](https://www.materialinsights.org/technologies/e_passive/) Ventilation with heat recovery keeps the warmth of outgoing air in the building.
- [Rcp Recuperators and regenerators](https://www.materialinsights.org/technologies/e_recuperators/) Takes heat from furnace exhaust back into the combustion air.
- [Shr Shared and district heat reuse](https://www.materialinsights.org/technologies/e_shared_heat/) Takes heat that a factory, data centre, sewage flow or tunnel would reject and sells it to a heating network.

Show 4 more

- [CDQ Steel plant energy recovery](https://www.materialinsights.org/technologies/e_steel_recovery/) Dry quenching recovers about 85% of the waste heat of coal carbonisation.
- [WHU Waste heat for drying, water and food](https://www.materialinsights.org/technologies/e_waste_heat_uses/) Takes low-grade heat from exhausts, cooling water and power plants and uses it for drying, warming and desalination.
- [WHR Waste-heat power (steam Rankine)](https://www.materialinsights.org/technologies/e_whr_rankine/) Takes heat from kiln, furnace and engine exhaust that would be lost.
- [OH Open-hearth steelmaking](https://www.materialinsights.org/technologies/open_hearth_steelmaking/) The regenerative furnace captures the heat of the waste gases to preheat the air and fuel gas.

## Other sections

