# Fluids: pressure, flow, lift and drag

Water in a pipe, air over a wing and wind through a turbine all obey a few rules of pressure, continuity, momentum and friction. This module builds those rules from everyday cases and works twelve estimates, from a city water main and a farm borewell to a car at highway speed and a 144 m wind turbine, then shows how scale models and test data fill the gaps that theory leaves.

Source page: https://www.materialinsights.org/learn/engineering/fluids/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Engineering](https://www.materialinsights.org/learn/engineering/) / Module 5

## Fluids: pressure, flow, lift and drag

Water in a pipe, air over a wing and wind through a turbine all obey a few rules of pressure, continuity, momentum and friction. This module builds those rules from everyday cases and works twelve estimates, from a city water main and a farm borewell to a car at highway speed and a 144 m wind turbine, then shows how scale models and test data fill the gaps that theory leaves.
 5 parts · 15 sections · about 50 minutes · 0 of 5 parts read

### By the end you will be able to

- Calculate pressure from depth and use buoyancy to find what a hull displaces and carries
- Apply continuity and Bernoulli's principle to find speeds, pressure drops and jet speeds in pipes
- Use the Reynolds number to tell smooth from turbulent flow, and estimate pipe friction and pumping power
- Estimate drag and the power it costs at different speeds, and lift on a wing from speed and area
- Explain why large slow rotors are efficient and estimate the power a wind turbine takes from the wind
- Describe how engineers use control volumes, scale models and dimensionless numbers to design what theory cannot predict

### Contents

1. [Part 1 Pressure and buoyancy: what fluids do when they stand still](https://www.materialinsights.org/learn/engineering/fluids/p1/)

Your ears ache at the bottom of a deep swimming pool, a steel ship floats, and a brake pedal that moves a few centimetres stops a car of well over a tonne. All three come from one idea, pressure in a fluid at rest. This part defines pressure, shows how it grows with depth, how a sealed liquid passes it on, and how it holds up a ship.

  - Pressure is force per area, and in still water it grows by about one atmosphere for every ten metres of depth
  - A sealed liquid passes pressure on everywhere, so a small push on a small piston becomes a big push on a big one
  - Buoyancy is the weight of the fluid pushed aside, so a steel ship floats if its shape displaces more water than the steel weighs

2. [Part 2 Flow, continuity and Bernoulli: what happens when fluid moves](https://www.materialinsights.org/learn/engineering/fluids/p2/)

Once water moves, new questions arise: how much passes each second, how fast it goes in a narrow section, and what happens to its pressure. This part gives three tools that answer them: continuity, Bernoulli's principle and the habit of drawing an imaginary box round a flow and counting what crosses its walls. Each is used on a city water main or a jet.

  - Continuity: what flows in must flow out, so flow rate equals area times speed
  - Bernoulli's principle: along a smooth flow, a rise in speed is paid for by a fall in pressure
  - The control volume: draw a box round the machine and count what crosses its walls

3. [Part 3 Viscosity, turbulence and pipe friction: what moving fluid costs](https://www.materialinsights.org/learn/engineering/fluids/p3/)

Bernoulli's principle ignores friction, but real fluids stick to walls and drag on each other, and every pipe, duct and channel pays for this in pressure. This part introduces viscosity, the Reynolds number that tells smooth flow from churning flow, the rule for pipe friction, and the way a pump or a fan is sized to cover that cost.

  - Viscosity is internal friction, and the Reynolds number compares inertia with it
  - In a long pipe the friction loss grows with the square of the speed, so a small pipe at high flow is costly to pump
  - A pump gives fluid pressure, and the pipe takes it back: the working point is where the two curves cross

4. [Part 4 Drag and lift: forces from moving through a fluid](https://www.materialinsights.org/learn/engineering/fluids/p4/)

A car at highway speed spends most of its fuel pushing air aside, and an aeroplane stays up by pushing air down. Both forces come from the same source, a body moving relative to a fluid. This part builds the drag formula, shows why it grows with the square of speed and the power with the cube, explains streamlining, and builds the lift formula for a wing.

  - Drag grows with the square of speed because a body must shove aside more air, and shove each kilogram faster
  - Streamlining fights pressure drag by keeping the flow attached to the body
  - Lift: a wing turns air downward, and the reaction holds the aeroplane up

5. [Part 5 Fans, propellers, turbines and models: putting flow to work and learning to predict it](https://www.materialinsights.org/learn/engineering/fluids/p5/)

A ceiling fan, a ship's propeller and a wind turbine blade are the same kind of object used in different directions: a rotating wing that either gives energy to a fluid or takes it. This part shows why big slow rotors are efficient, estimates the power of a wind turbine, and explains how engineers use scale models and test data to design what theory cannot yet predict.

  - A propeller or fan is a spinning wing, and it is cheaper to push a lot of air slowly than a little air fast
  - A wind turbine takes power from the wind in proportion to the cube of its speed, and cannot take all of it
  - Models and test data: what engineers do when the flow is too complicated to calculate

6. [Wrap-up Key terms, try it in the table, final quiz, sources](https://www.materialinsights.org/learn/engineering/fluids/review/)

[Start: Part 1, Pressure and buoyancy: what fluids do when they stand still →](https://www.materialinsights.org/learn/engineering/fluids/p1/)

## Other sections

- [Pressure and buoyancy: what fluids do when they stand still](https://www.materialinsights.org/learn/engineering/fluids/p1/index.md)
- [Flow, continuity and Bernoulli: what happens when fluid moves](https://www.materialinsights.org/learn/engineering/fluids/p2/index.md)
- [Viscosity, turbulence and pipe friction: what moving fluid costs](https://www.materialinsights.org/learn/engineering/fluids/p3/index.md)
- [Drag and lift: forces from moving through a fluid](https://www.materialinsights.org/learn/engineering/fluids/p4/index.md)
- [Fans, propellers, turbines and models: putting flow to work and learning to predict it](https://www.materialinsights.org/learn/engineering/fluids/p5/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/engineering/fluids/review/index.md)
