# What engineers do: rules of thumb, the method and the kinds of engineering knowledge: Key terms, quiz and sources

Source page: https://www.materialinsights.org/learn/engineering/what-engineers-do/review/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Engineering](https://www.materialinsights.org/learn/engineering/) / [Module 1: What engineers do: rules of thumb, the method and the kinds of engineering knowledge](https://www.materialinsights.org/learn/engineering/what-engineers-do/) Wrap-up

## What engineers do: rules of thumb, the method and the kinds of engineering knowledge: review

### Key terms

**Engineering method**
: The engineer's way of reaching a working design: combining tested shortcuts with the materials, money and knowledge on hand, judged by results, without waiting for a full explanation.

**Rule of thumb**
: A quick, imperfect guide that raises the odds of a good answer without guaranteeing one.

**Heuristic**
: The technical name for a rule of thumb: any aid to solving a problem that is trusted for its results rather than proved.

**Satisficing**
: Looking for a design that is good enough on every count that matters, instead of the single best.

**Safety factor**
: A multiple by which a part is made stronger than the load it is expected to carry, to cover what is unknown.

**Working idea**
: The trick by which a device does its job, which makes it the kind of device it is; philosophers call it the operational principle.

**Normal configuration**
: The layout an industry has come to expect for a device, settled by years of trying alternatives.

**Design targets**
: The quantities a design will be judged on, and the numbers or limits set for them.

**Calculation methods**
: Formulas, models and procedures that predict how a design will behave.

**Measured values**
: Numbers about real materials, parts and processes that must be found by test because no formula supplies them.

**Field lessons**
: Knowledge from workshops and from use that no formula contains but that a design ignores at its peril.

**Design judgement**
: The working habits and the sense of risk by which a designer carries a design through to the end.

**Normal design**
: Design that improves a device whose working idea and usual shape are already known.

**Radical design**
: Design for which the working idea or shape is unknown and success is not assured.

**Design hierarchy**
: The layering of a device into systems, subsystems and parts, each with its own design problem.

**Learning from service**
: Knowledge gained from finished machines in use, including from how they fail.

**Tacit knowledge**
: Skill and judgement that people hold from experience and can seldom write down.

**Engineering field**
: A speciality such as civil, mechanical, electrical or chemical engineering, defined by the physics and problems it handles.

### Try it in the table

- Open the Products table and find 'Centrifugal [water](https://www.materialinsights.org/commodities/water/) pump'. Redo the rooftop tank estimate for a tank of 2,000 litres filled in 15 minutes through 12 m, and compare the power with the pump sizes you see for sale.
- Look up 'Lighting and displays' and the 'LED lamp' product. Estimate the yearly energy saved by replacing ten 60 W filament lamps in a flat with 9 W LEDs at five hours a day, and say what working idea changed.
- Open 'Reinforced concrete' and '[Steel](https://www.materialinsights.org/commodities/steel/) reinforcing bar'. Use the one twenty-eighth rule to size a slab for a 3.5 m room and estimate the weight per square metre.
- Pick 'Electric motors and drives' and 'Gear train'. Name which engineering fields are involved, and say whether the technology is a normal design or a radical part inside a normal device.
- Open 'Electric bus' in the Products table. Estimate range from a pack size and an energy use per kilometre of your own choosing, then compare with a maker's published figures.
- Browse the Periodic Table of Technologies for 'Haber-Bosch [ammonia](https://www.materialinsights.org/chemicals/ammonia/) synthesis' and 'Drip irrigation'. For each, write down the working idea in one sentence and the field that dominates.

### Final quiz

What most clearly separates the question an engineer asks from the one a scientist asks?
 Engineering aims at a working object under constraints, and science at general explanation. They overlap but their goals differ.

Thickness rules for load-bearing brick walls fell out of use once concrete frames carried the load. This shows that rules of thumb:
 A rule belongs to the job that produced it. When the structure changed, the rule stopped being useful without ever being shown wrong.

A rope for a 1,000 kg lift is designed for 49 kN with a factor of 5. Why not choose a factor of 50?
 A margin is bought with material and money. Engineers, and the codes they write, set it by weighing the cost of failure against the cost of the margin; lift ropes get about 12.

Which of these is a design target rather than a calculation method?
 A target is a numerical goal. The first option is a formula, the second a measured value, the fourth a field lesson.

A pump gives 163 W to the water, and pump and motor together are about 40% efficient. What electric power is needed?
 Electric power = hydraulic power divided by efficiency: 163 / 0.4, about 408 W.

Which statement about learning from machines in service is correct?
 Running real machines reveals behaviour no calculation anticipated, so use in service is a source of knowledge.

Replacing the engine of a car by a motor and battery, while keeping the rest of the car, is best described as:
 The drive train working idea changed, but the overall device and much other knowledge stayed. Interfaces needed new work.

Why do real products need several engineering fields?
 A product is a system of parts whose key problems lie in structures, power, chemistry, software and production.

[Next module: Thinking in estimates: units, scaling and educated guessing →](https://www.materialinsights.org/learn/engineering/thinking-in-estimates/)

### Sources for this module

- Hammack, The Things We Make (Sourcebooks, 2023) · ch. 1, 'The Invisible Method' (the idea of the engineering method as rules of thumb used with incomplete information, restated here in the course's own words); ch. 4, 'Resources'; ch. 6, 'Science: The Gold Standard for Rules of Thumb'
- Vincenti, What Engineers Know and How They Know It (Johns Hopkins University Press, 1990) · ch. 1, 'Introduction: Engineering As Knowledge' (normal and radical design, design hierarchy); ch. 3, 'Establishment of Design Requirements'; ch. 7, 'The Anatomy of Engineering Design Knowledge' (the six categories of design knowledge and seven knowledge-generating activities on which Part 2's own grouping draws)
- Kosky et al., Exploring Engineering (Academic Press, 2013) · part 1, ch. 1, 'What Engineers Do'
- Bureau of Indian Standards, IS 456:2000 Plain and Reinforced Concrete: Code of Practice, as applied in Central Institute for Educational Technology (CEC) course notes · cl. 24.1 span to overall depth ratios for slabs up to 3.5 m, https://cec.nic.in/webpath/curriculum/Module/Arch/Paper16/30/downloads/faq.pdf
- Lift and Escalator Library, paper on suspension rope safety factors under EN 81 · minimum factors of 12 (three or more ropes) and 16 (two ropes), https://liftescalatorlibrary.org/paper_indexing/papers/00000145.pdf
- CEEW, 'How the mandatory standard and labelling programme affects the Indian fan market' (2023) · service value in cubic metres per minute per watt, https://www.ceew.in/blogs/how-mandatory-standard-and-labelling-programme-affects-indian-fan-market
- Press Information Bureau, Government of India, 'UJALA: 10 years' backgrounder (January 2025) · 36.87 crore LED bulbs at Rs 70 each, launched 5 January 2015, https://static.pib.gov.in/WriteReadData/specificdocs/documents/2025/jan/doc202516481801.pdf
- HDFC Sky, 'Petrol, diesel prices today, November 11, 2026' (from Goodreturns) · petrol Rs 102 to Rs 112 a litre in Delhi, Mumbai, Bengaluru and Chennai, https://hdfcsky.com/news/petrol-diesel-prices-today-november-11-2026-check-latest-rates-in-delhi-mumbai-kolkata-chennai-bengaluru-hyderabad
- ICCT, 'Emissions reduction and benefits of the first 3,825 electric buses under PM e-Bus Sewa' (November 2024) · 1.3 kWh per km assumed for 12 m e-buses (upper limit from the CESL tender), https://theicct.org/emissions-reduction-and-benefits-of-the-first-3825-electric-buses-under-pm-ebus-sewa-nov24
- ITDP India, 'E-Bus Basics' (2023) · batteries above 300 kWh recommended for daily routes of 180 to 230 km, https://itdp.in/wp-content/uploads/2023/07/E-Bus-Basics.pdf
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · ch. 1, 'Atoms in Motion', https://www.feynmanlectures.caltech.edu/I_01.html; ch. 4, 'Conservation of Energy', https://www.feynmanlectures.caltech.edu/I_04.html (further reading)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/engineering/what-engineers-do/index.md)
- [Engineering is not applied science](https://www.materialinsights.org/learn/engineering/what-engineers-do/p1/index.md)
- [The kinds of knowledge engineers use](https://www.materialinsights.org/learn/engineering/what-engineers-do/p2/index.md)
- [Normal design and radical design](https://www.materialinsights.org/learn/engineering/what-engineers-do/p3/index.md)
- [The fields of engineering and the road ahead](https://www.materialinsights.org/learn/engineering/what-engineers-do/p4/index.md)
