# Carbon chemistry: from hydrocarbons to polymers: Hydrocarbons, crude oil and fuels

Source page: https://www.materialinsights.org/learn/science/carbon-chemistry/p2/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 12: Carbon chemistry: from hydrocarbons to polymers](https://www.materialinsights.org/learn/science/carbon-chemistry/) Part 2 of 6

## Hydrocarbons, crude oil and fuels

The simplest organic molecules hold only carbon and hydrogen. This part covers the saturated chains called alkanes, shows how boiling point alone sorts crude oil into fractions, and explains why petrol needs the right molecular shape.

### 2.1 Alkanes are chains with only single bonds, and their boiling points climb with length because longer chains stick together more

A hydrocarbon contains only carbon and hydrogen. If every bond is single, so that no carbon could take another hydrogen, it is saturated, and the family is the alkanes, CnH2n+2. Their names run methane, ethane, propane, butane, then pentane to decane from the Greek numbers. Propane and butane make up the cooking gas in an Indian cylinder.

The pattern in the table below follows from module 10. Alkane molecules are nonpolar, so the only pull between them is the dispersion force, and it grows with the number of electrons and with the length of surface in contact. Each added CH2 group raises the boiling point by roughly 20 to 30 degrees C near the start of the series. Ordinary paraffin wax is a mixture of chains with about 20 to 40 carbons and melts near 50 to 65 degrees C.

Data The first alkanes, with approximate boiling points

| Name | Formula | Boiling point (degrees C) | State at 25 degrees C | Where you meet it |
|---|---|---|---|---|
| Methane | CH4 | -162 | Gas | Natural gas, biogas |
| Propane | C3H8 | -42 | Gas | LPG in cylinders |
| Butane | C4H10 | -1 | Gas | Lighters, LPG |
| Hexane | C6H14 | 69 | Liquid | Solvent for extracting edible oil |
| Octane | C8H18 | 126 | Liquid | Main petrol component |
| Hexadecane | C16H34 | 287 | Liquid | Diesel range |
| Paraffin wax | about C20 to C40 | melts 50 to 65 | Waxy solid | Candles |

Boiling points of straight chains, rounded. Module 10 (Matter and bonding) explains why dispersion forces rise with size.
 Source: Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, quoted to two or three figures as round numbers for estimates; not re-fetched in this session  Worked example

#### A candle is a column of chains

A candle of 100 g of paraffin, taken as C25H52 (molar mass 352 g per mole), holds 100 / 352 = 0.28 mol of wax, or 7.1 mol of carbon (calculated). The flame burns wax vapour, not liquid. One mole of C25H52 needs 38 mol of O2 (25 for the carbon, 13 for the 52 hydrogens), so the candle needs 0.28 x 38 = 10.8 mol of O2. At room conditions, 24 L per mole, that is 0.26 m3 of oxygen, or 0.26 / 0.21 = 1.2 m3 of air (calculated).

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session

### 2.2 Crude oil is split by boiling point, because a heated mixture gives vapour that condenses wherever the column is cool enough

Crude oil from the ground is not one substance. It is thousands of hydrocarbons, mostly alkanes, ring-shaped cycloalkanes and aromatics, with small amounts of sulphur and nitrogen compounds. Crude formed from plankton and algae buried in sea-floor mud and slowly cooked by heat and pressure over millions of years. Coal, mostly from buried land plants, is the solid cousin, rich in large carbon-ringed molecules. A refinery's first job is not to change crude's molecules but to sort them, by fractional distillation.

Distillation works because big molecules are slow to escape into vapour. The crude passes through a furnace at about 350 to 400 degrees C, which turns most of it to vapour, and enters near the base of a tall column fitted with trays. Liquid running back down cools the rising vapour, so the column grades from hottest at the base to coolest at the top. A given molecule climbs until it meets a tray cooler than its boiling point, condenses there and is piped off with others of similar size. Each product is therefore a fraction with a boiling range, not a pure compound. Gases too light to condense leave from the top, and the heaviest part, which never boiled, leaves from the bottom.

What the barrel contains does not match what the market wants, so refineries also break long chains into short ones, called cracking, and reshape molecules, called reforming. Those steps, and what the chemicals industry makes from naphtha and gas, belong to the Understanding Chemicals module 'From crude oil and natural gas to the C1-C4 building blocks'. The site's nodes 'Crude oil' and 'Distillation' cover the commodity and the equipment.

Process flowchart Crude oil to fractions: sorting by boiling point Inputs **Crude oil**thousands of hydrocarbons, from 1 carbon to 70 and more Process steps 1 **Furnace**

heated to about 350 to 400 degrees C so most of it becomes vapour
 2 **Column**

cool at the top, hot at the bottom; vapours condense on trays where they meet a cooler level
 3 **Fractions drawn off**

gas (butane and lighter) below about 30 degrees C; naphtha, for petrol and chemicals, about 30 to 190 (roughly C5 to C10); kerosene about 190 to 270 (roughly C11 to C15); gas oil, including diesel, about 270 to 425 (roughly C15 to C27)
 Outputs **Residue**boils above about 425 degrees C; vacuum distillation splits it further and leaves bitumen for roads

Rounded cut points from one teaching reference; each refinery sets its own, so the Understanding Chemicals module quotes slightly different ranges. Carbon ranges are calculated from the boiling points of straight-chain alkanes (decane 174, pentadecane 270 degrees C).
 Source: Penn State University, FSC 432 Petroleum Refining, Cut Points (Table 4.1, TBP cut points), https://courses.ems.psu.edu/fsc432/book/export/html/612 (butanes and lighter; light naphtha 32 to 88 C; heavy naphtha 88 to 193 C; kerosene 193 to 271 C; light gas oil 271 to 321 C; heavy gas oil 321 to 425 C; vacuum gas oils 425 to 564 C; vacuum residue above 565 C)  Common misreading

#### 'Refining creates petrol and diesel from oil'

Distillation creates nothing. Every fraction was already present in the crude, and the amount of each is set by the crude's origin: light crudes give more of the small molecules and heavy crudes more residue. If the market wants more petrol than the barrel holds, the refinery must convert molecules, which costs energy and money. This is why different crude oils trade at different prices.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- [Penn State University, FSC 432 Petroleum Refining, Cut Points (Table 4.1, TBP cut points)](https://courses.ems.psu.edu/fsc432/book/export/html/612 (butanes and lighter; light naphtha 32 to 88 C; heavy naphtha 88 to 193 C; kerosene 193 to 271 C; light gas oil 271 to 321 C; heavy gas oil 321 to 425 C; vacuum gas oils 425 to 564 C; vacuum residue above 565 C)) · web
- [Centre for Industry Education Collaboration, University of York, The Essential Chemical Industry: Distillation](https://essentialchemicalindustry.org/processes/distillation.html (the crude oil is heated in a furnace to about 650 K, about 377 C)) · web

### 2.3 Petrol burns smoothly when its molecules are compact and branched, which is what an octane rating measures

A petrol engine compresses a mix of fuel vapour and air to about a tenth of its volume, then fires a spark. The flame should sweep across the cylinder. Compression raises the temperature, and if some fuel ignites before the flame reaches it, the pressure jumps abruptly and the engine knocks, a metallic pinging that wastes energy and damages pistons. Fuel molecules differ in how readily they ignite under compression. Straight chains break and react readily, so they knock easily. Branched, compact molecules and rings resist.

The octane number puts a figure on this. It is defined by comparison with two reference compounds in a test engine. Heptane, a straight chain of seven carbons, is given 0. Isooctane, 2,2,4-trimethylpentane, a branched molecule of eight carbons, is given 100. A fuel with an octane number of 91 knocks in the test as a blend of 91 per cent isooctane and 9 per cent heptane would. A compound can score above 100: toluene scores about 120 and ethanol about 109, so blending ethanol into petrol raises the rating. India reached 20 per cent ethanol in its petrol in 2025-26, using ethanol made from sugarcane, maize and surplus rice. See the node 'Bioethanol' and module 11 (Chemical reactions) for the fuel and carbon side of combustion.

This is why a refinery reforms and branches its molecules rather than only distilling them. A fraction from the column often rates around 60 to 70, too low for a modern engine, and reforming raises it by rearranging chains into branches and rings.

Data Octane ratings of pure compounds (research octane number, approximate)

| Compound | Shape | Octane number |
|---|---|---|
| Heptane | Straight chain, 7 carbons | 0 |
| Hexane | Straight chain, 6 carbons | about 25 |
| Isooctane | Branched, 8 carbons | 100 |
| Toluene | Aromatic ring with a methyl group | about 120 |
| Ethanol | Alcohol, 2 carbons | about 109 |

Rounded standard values; the research method is used for pump labelling.
 Source: Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, quoted to two or three figures as round numbers for estimates; not re-fetched in this session  Worked example

#### Mixing a reference fuel on paper

To make 1 litre of a fuel rated 91, mix by volume 91 per cent isooctane and 9 per cent heptane, which is 910 mL and 90 mL (calculated). For a rating of 95 you need 950 mL and 50 mL. The rating of a reference blend is simply the per cent of isooctane. Real pump petrol is not such a blend, but it matches one in the test engine.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- [Press Information Bureau, Government of India, factsheet on ethanol blending (5 July 2026)](https://pib.gov.in/FactsheetDetails.aspx?Id=150699 (blending rose from under 1.5 per cent in 2013-14 to 20 per cent in 2025-26, five years ahead of schedule; ethanol from sugarcane, maize and surplus rice)) · web

### See it in the table
[Oil Crude oil](https://www.materialinsights.org/energy/crude_oil/)[Gas Natural gas](https://www.materialinsights.org/energy/natural_gas/)[Mz Maize](https://www.materialinsights.org/commodities/maize/)[Ri Rice](https://www.materialinsights.org/commodities/rice/)[H2 Hydrogen](https://www.materialinsights.org/chemicals/hydrogen/)[O2 Oxygen](https://www.materialinsights.org/chemicals/oxygen/)[Tol Toluene](https://www.materialinsights.org/chemicals/toluene/)[EtOH Bioethanol](https://www.materialinsights.org/energy/bioethanol/)

### Check your understanding

A refinery column separates crude oil into fractions mainly because
 Distillation is a physical sorting by boiling point. The hot vapour rises and each kind condenses where the temperature drops below its own boiling point.

Why does a longer straight-chain alkane have a higher boiling point?
 Alkanes are nonpolar, so dispersion forces are the only attraction between molecules, and they grow with size and contact area.

A fuel matches a mix of 95 per cent isooctane and 5 per cent heptane in the test engine. What is its octane number?
 By definition the rating equals the per cent by volume of isooctane in the matching blend.

[← Part 1: Why carbon is special: four bonds, chains, rings and the end of vitalism](https://www.materialinsights.org/learn/science/carbon-chemistry/p1/)[Mark read · Part 3: Double bonds, triple bonds and benzene →](https://www.materialinsights.org/learn/science/carbon-chemistry/p3/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/carbon-chemistry/index.md)
- [Why carbon is special: four bonds, chains, rings and the end of vitalism](https://www.materialinsights.org/learn/science/carbon-chemistry/p1/index.md)
- [Double bonds, triple bonds and benzene](https://www.materialinsights.org/learn/science/carbon-chemistry/p3/index.md)
- [Functional groups: how a few atoms steer a whole molecule](https://www.materialinsights.org/learn/science/carbon-chemistry/p4/index.md)
- [Polymers: long chains from small units](https://www.materialinsights.org/learn/science/carbon-chemistry/p5/index.md)
- [Plastics and what becomes of them](https://www.materialinsights.org/learn/science/carbon-chemistry/p6/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/carbon-chemistry/review/index.md)
