# Carbon chemistry: from hydrocarbons to polymers: Plastics and what becomes of them

Source page: https://www.materialinsights.org/learn/science/carbon-chemistry/p6/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 12: Carbon chemistry: from hydrocarbons to polymers](https://www.materialinsights.org/learn/science/carbon-chemistry/) Part 6 of 6

## Plastics and what becomes of them

The stability that makes a polymer useful also makes it last. This part follows plastic from production to waste with the OECD's figures, explains why recycling is chemically hard, and sets India beside the world.

### 6.1 Plastic production doubled between 2000 and 2019 because a few cheap polymers do so many jobs, and most of it is used once

Look around a kitchen. The bucket is polyethylene, the bottle PET, the pipe under the sink PVC, the lunch box polypropylene, the shirt polyester. Plastics replaced glass, paper, metal and wood in many roles because they are light, tough, waterproof, easy to mould and cheap. Their raw material is a small share of a barrel of oil or of natural gas.

The OECD's Global Plastics Outlook, published in 2022 with data for 2019, estimates that world plastics production doubled from 2000 to reach 460 million tonnes in 2019. Divided over the 7.7 billion people alive then, that is 460 Mt / 7.7 billion = 60 kg a head (calculated), roughly one person's body weight every year.

Because the chains are long and the C-C bonds are strong, plastics do not rot the way leaves do. Most organisms have no enzymes to break a polyethylene chain. In 2016 Japanese researchers reported in Science a bacterium, Ideonella sakaiensis, that feeds on PET by splitting its ester links with two enzymes. It works slowly and is the exception. Polyolefins, which are plain carbon chains, are far more resistant.
 In the data

#### Floating and sinking

Density tells polymers apart. Polyethylene (about 0.92 to 0.96 g per cm3) and polypropylene (0.90) float on water, which has density 1.00. PET (1.38), PVC (1.4) and nylon (about 1.14) sink. In a recycling plant, shredded bottles and caps go into a water tank: the caps, made of polyethylene or polypropylene, float, and the PET flakes sink. Density cannot separate PET from PVC, since both sink, so a little PVC in the PET stream is a serious contaminant.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- [OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022)](https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)) · web
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- [Yoshida S. and colleagues, A bacterium that degrades and assimilates poly(ethylene terephthalate), Science 351, 1196 (2016), abstract via the ESTHER database](https://bioweb.supagro.inrae.fr/ESTHER/paper/Yoshida_2016_Science_351_1196 (PubMed 26965627; Ideonella sakaiensis 201-F6, found by screening microbial communities exposed to PET in the environment, uses PET as its major energy and carbon source with two enzymes that hydrolyse PET and its intermediate)) · web

### 6.2 The OECD's 2019 ledger shows that of 353 million tonnes of plastic waste only 9 per cent was recycled, and about a fifth escaped management altogether

The OECD reports global plastic waste of 353 million tonnes in 2019, more than double the figure for 2000. It then sorts where this waste went. About 9 per cent was recycled, 19 per cent burned in incinerators, 50 per cent buried in landfill and 22 per cent was mismanaged, meaning dumped in the open, burned in the open or left in the environment.

The 9 per cent hides a loss. Only about 15 per cent of waste was collected for recycling, and about 40 per cent of what was collected was rejected as residue, because it was dirty, mixed or the wrong grade. Multiplying, 0.15 x 0.60 = 0.09 (calculated), which matches. Recycling is therefore limited less by chemistry than by collection and sorting.

In 2019 about 6.1 million tonnes of plastic waste leaked into rivers, lakes and seas, and 1.7 million tonnes reached the oceans.

The outlook then projects forward with no new policy. Plastics use rises from 460 million tonnes in 2019 to 1,231 million in 2060, and waste from 353 to 1,014 million tonnes. Recycling reaches 17 per cent of waste, still less than a fifth, incineration and landfill stay near 20 and 50 per cent, and the mismanaged share falls only to 15 per cent. Leakage to the environment doubles to 44 million tonnes a year. Almost two-thirds of 2060 waste comes from short-lived items such as packaging, low-cost products and textiles.

Data Where 353 million tonnes of plastic waste went in 2019, and the 2060 outlook

| Item | 2019 | 2060 without new policy |
|---|---|---|
| Plastics use | 460 Mt | 1,231 Mt |
| Plastic waste | 353 Mt | 1,014 Mt |
| Recycled | 9 per cent (about 32 Mt) | 17 per cent |
| Incinerated | 19 per cent (about 67 Mt) | about 20 per cent |
| Landfilled | 50 per cent (about 177 Mt) | about 50 per cent |
| Mismanaged | 22 per cent (about 78 Mt) | 15 per cent |
| Leakage to the environment | 6.1 Mt to waters, 1.7 Mt of it to oceans | 44 Mt a year (all environmental leakage) |

Shares are of waste generated. Tonnages in brackets are calculated here from the shares. The 2060 leakage figure covers all environments, a wider measure than the 2019 aquatic figure.
 Source: OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022), https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)  Worked example

#### The 2019 ledger in tonnes

Take 353 Mt. Recycled 9 per cent: 31.8 Mt. Incinerated 19 per cent: 67.1 Mt. Landfilled 50 per cent: 176.5 Mt. Mismanaged 22 per cent: 77.7 Mt. Total 353.1 Mt, with rounding (all calculated). Per person in 2019: 353 Mt / 7.7 billion = 46 kg a year (calculated). Mixed plastic waste, mostly hydrocarbon, gives roughly 35 MJ per kg when burned, so 67 x 10^9 kg x 35 MJ per kg = 2.3 EJ (calculated), about 0.4 per cent of the roughly 600 EJ the world used in 2019. Incineration saves landfill space but is a small energy source, and it returns the carbon to the air as CO2.

- [OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022)](https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)) · web
- [OECD, Global plastic waste set to almost triple by 2060 (press release, 3 June 2022)](https://www.oecd.org/newsroom/global-plastic-waste-set-to-almost-triple-by-2060.htm (consumption 460 Mt in 2019 to 1,231 Mt in 2060; waste 353 Mt to 1,014 Mt; recycling 9% to 17%; incineration and landfill around 20% and 50%; mismanaged share falls to 15%; leakage doubling to 44 Mt a year; almost two-thirds of 2060 waste from short-lived items)) · web
- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'

### 6.3 Recycling is hard because mixed polymers cannot be melted together, additives travel with the plastic, and each melting shortens the chains

Thermoplastics can in principle be melted and used again, the basis of mechanical recycling. In practice a problem emerges. Two different polymers are usually not compatible when melted, so a blend is weak and cloudy. A single PVC bottle in a batch of PET releases acid at the melting temperature and ruins it. Colours, labels, glues, fillers and plasticisers, all added for the first life, remain. Each time the material is heated, some chains break and the average length falls, so it is typically used for less demanding items. This is called downcycling. The chasing-arrows symbol on a product only states which polymer it is, numbered 1 for PET, 2 for HDPE, 3 for PVC, 4 for LDPE, 5 for PP, 6 for PS and 7 for others. It does not guarantee anyone will recycle it.

Condensation polymers have a useful extra route. The link that formed with loss of water can be reversed by adding water or an alcohol, which cuts PET back into its monomers, to be purified and rebuilt. This is chemical recycling. Addition polymers such as polyethylene lack such a weak link, since their backbone is carbon-carbon, so they must be heated to break them into oils and gases, a more demanding process. The Understanding Chemicals module 'Bioplastics: PLA, PHA, bio-PE and starch blends' compares the plastics made from plants, and shows that a plastic being plant-based and a plastic being biodegradable are two separate questions.

The chemistry therefore points to practical limits. A single polymer, clean and collected, recycles well; a mixed multilayer sachet does not. The site's node 'Plastic, paper and glass recyclers' lists the enterprises that do this work.
 Common misreading

#### 'The recycling symbol means it is recyclable'

The triangle with a number is a resin identification code. It names the polymer so that sorters can tell PET from PVC. Whether a given item gets recycled depends on whether a collector, a sorter and a buyer exist locally. Dirty film, black plastic that sensors cannot read, and multilayer packs are often not recycled even when marked. The OECD's 9 per cent worldwide shows how far reality sits below the symbol.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- [OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022)](https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)) · web
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session

### 6.4 India's own plastic figures are smaller than the global average suggests, partly because reporting is incomplete, and policy now places responsibility on producers

India's Central Pollution Control Board (CPCB) collects plastic waste data from states. The figures reported by the environment ministry show about 3.36 million tonnes in 2018-19, 3.47 million in 2019-20 and 4.13 million in 2020-21. Compare this with the OECD's 46 kg a person. India had about 1.4 billion people in 2020-21, so 4.13 million tonnes works out at about 3 kg a head (calculated), roughly one-fifteenth of the global mean. The CPCB publishes totals, not a per-person figure. Indian per-capita use is genuinely lower than in rich countries, but not by that factor. Many states report no figures at all, and a large informal sector of waste pickers collects and sells plastic before it enters official counts. The gap warns that a number is only as good as its measuring method, a theme from module 1.

India's response includes a policy of extended producer responsibility for plastic packaging. Under it, producers, importers and brand owners must make sure a quantity of packaging is collected and processed. For 2022-23 the obligation stood at about 3 million tonnes, and registered processors issued certificates for about 2.5 million tonnes. The system counts tonnes processed rather than tonnes of plastic that really came back into use, so how well it works depends on audit and verification.

Data A sum on paper: reported plastic waste per person

| Quantity | Working | Result |
|---|---|---|
| OECD, world, 2019 | 353 Mt / 7.7 billion | 46 kg per person per year (calculated) |
| CPCB, India, 2020-21 | 4.13 Mt / 1.4 billion | about 3 kg per person per year (calculated) |
| Ratio | 46 / 3 | about 15 times (calculated) |
| Extended producer responsibility, 2022-23 | 2.5 Mt processed / 3 Mt obligation | about 83 per cent of the obligation (calculated) |

Populations are round figures. The CPCB total has many state entries missing.
 Source: Ministry of Environment, Forest and Climate Change, Government of India, via the Press Information Bureau (CPCB data), https://pib.gov.in/PressReleasePage.aspx?PRID=1943210 (release of 27 July 2023: plastic waste generation 3,360,043 t in 2018-19, 3,469,780 t in 2019-20 and 4,126,997 t in 2020-21 from CPCB annual reports, consolidated from state boards with some entries NA; no per-person figure is given; for 2022-23 an EPR obligation of around 3 Mt and 2.5 Mt of certificates from registered processors)  Case

#### Scaling the Indian figure to the world

If every person produced waste at India's reported 3 kg a year, a world of 7.7 billion would make 3 x 7.7 = 23 Mt (calculated). The OECD's 353 Mt is fifteen times larger. Part of the difference is real, since wealthier people use far more packaging. Part is the missing informal and unreported flow. A fair reading is that the Indian figure is a floor, not an estimate of the truth, and that it will rise with incomes.

- [Ministry of Environment, Forest and Climate Change, Government of India, via the Press Information Bureau (CPCB data)](https://pib.gov.in/PressReleasePage.aspx?PRID=1943210 (release of 27 July 2023: plastic waste generation 3,360,043 t in 2018-19, 3,469,780 t in 2019-20 and 4,126,997 t in 2020-21 from CPCB annual reports, consolidated from state boards with some entries NA; no per-person figure is given; for 2022-23 an EPR obligation of around 3 Mt and 2.5 Mt of certificates from registered processors)) · web
- [OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022)](https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)) · web
- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'

### See it in the table
[H₂O Water](https://www.materialinsights.org/commodities/water/)[Gas Natural gas](https://www.materialinsights.org/energy/natural_gas/)[PP Polypropylene](https://www.materialinsights.org/chemicals/polypropylene/)[PVC PVC](https://www.materialinsights.org/chemicals/pvc/)[DOP Plasticisers](https://www.materialinsights.org/chemicals/plasticisers/)

### Check your understanding

In the OECD's 2019 ledger, which share of 353 million tonnes of plastic waste went to landfill?
 Half went to landfill. The rest was 9 per cent recycled, 19 per cent incinerated and 22 per cent mismanaged.

Why is PET easier to turn back into monomers than polyethylene?
 Condensation polymers contain weak links that the original reaction formed and that can be reversed. A carbon-carbon backbone has no such weak point.

A recycling-symbol number 5 on a tub tells you
 The number names the resin: 5 is polypropylene. Whether it is recycled depends on local collection and sorting.

[← Part 5: Polymers: long chains from small units](https://www.materialinsights.org/learn/science/carbon-chemistry/p5/)[Mark read · Wrap-up →](https://www.materialinsights.org/learn/science/carbon-chemistry/review/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/carbon-chemistry/index.md)
- [Why carbon is special: four bonds, chains, rings and the end of vitalism](https://www.materialinsights.org/learn/science/carbon-chemistry/p1/index.md)
- [Hydrocarbons, crude oil and fuels](https://www.materialinsights.org/learn/science/carbon-chemistry/p2/index.md)
- [Double bonds, triple bonds and benzene](https://www.materialinsights.org/learn/science/carbon-chemistry/p3/index.md)
- [Functional groups: how a few atoms steer a whole molecule](https://www.materialinsights.org/learn/science/carbon-chemistry/p4/index.md)
- [Polymers: long chains from small units](https://www.materialinsights.org/learn/science/carbon-chemistry/p5/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/carbon-chemistry/review/index.md)
