# Matter and bonding: phases, elements, compounds, solutions: The forces between molecules: dispersion, dipoles and hydrogen bonds

Source page: https://www.materialinsights.org/learn/science/matter-and-bonding/p5/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 10: Matter and bonding: phases, elements, compounds, solutions](https://www.materialinsights.org/learn/science/matter-and-bonding/) Part 5 of 6

## The forces between molecules: dispersion, dipoles and hydrogen bonds

A bond holds atoms inside a molecule. A far weaker family of attractions holds molecules to one another, and it decides whether a substance is a gas, liquid or solid at room temperature. This part traces where they come from, why hydrogen bonds make water odd, and how surface pull lifts water through a wall.

### 5.1 Every molecule attracts its neighbours through shifting charge, and the pull grows with size and with polarity

Methane, the gas in a CNG cylinder, boils at minus 162 degrees C. Butane, the main gas in a cooking-gas cylinder, boils at about minus 1 degree C. Both are made only of carbon and hydrogen, and both have the same kind of bonds. The difference lies in the attractions between molecules, which are weak compared with a bond, but add up.

The first kind acts on every molecule, polar or not. Even a nonpolar atom is a cloud of electrons that never stands still. At any instant the cloud is a little lopsided, so the atom has a tiny momentary dipole. That dipole pushes the electrons of the next molecule, which responds by forming a matching dipole of its own, and the two momentary dipoles attract. Fritz London explained this in 1930, and it is called the dispersion force. The bigger the molecule, the more electrons it has and the more loosely it holds them, so the easier it is to distort and the stronger the pull. That is why boiling points climb with molecular size.

A second kind needs permanent polarity. The positive end of one polar molecule attracts the negative end of the next, which is a dipole-dipole force. A polar molecule can also distort the electron cloud of a nonpolar neighbour, giving the dipole-induced dipole force. The strongest of this family acts between an ion and a polar molecule, and it is what pulls water around a dissolved ion, as part 6 shows.

Data Boiling point follows the pull between molecules

| Substance | Molar mass (g per mole) | Main force between molecules | Boiling point |
|---|---|---|---|
| Helium | 4 | Dispersion, very weak | -269 C |
| Argon | 40 | Dispersion | -186 C |
| Xenon | 131 | Dispersion, more electrons | -108 C |
| Methane CH4 | 16 | Dispersion | -162 C |
| Propane C3H8 | 44 | Dispersion | -42 C |
| Butane C4H10 | 58 | Dispersion, bigger | -1 C |
| Octane C8H18 | 114 | Dispersion, bigger still | 126 C |
| Dimethyl ether C2H6O | 46 | Dispersion and dipole-dipole | -24 C |
| Ethanol C2H6O | 46 | Dispersion, dipole and hydrogen bonds | 78 C |

Dimethyl ether and ethanol have the same atoms in the same numbers and differ only in how they are joined. They boil 102 degrees apart because ethanol can form hydrogen bonds, which the next section explains.
 Source: NIST Chemistry WebBook, Methane, phase change data, https://webbook.nist.gov/cgi/cbook.cgi?ID=C74828&Mask=D (normal boiling point 111 K, about -162 C; critical temperature 190.6 K, about -82.6 C)  Case

#### Why a cooking-gas cylinder holds liquid and a CNG cylinder cannot

Butane and propane boil below room temperature, so a modest pressure of a few atmospheres squeezes them into a liquid. Above about minus 83 degrees C no pressure at all can liquefy methane, because its molecules are too lightly attracted to stay together at that speed. So CNG is stored as a compressed gas, at around 200 atmospheres, while LPG is a liquid at a few.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 12, 'Chemical Bonds and Mixtures'
- [NIST Chemistry WebBook, Methane, phase change data](https://webbook.nist.gov/cgi/cbook.cgi?ID=C74828&Mask=D (normal boiling point 111 K, about -162 C; critical temperature 190.6 K, about -82.6 C)) · web

### 5.2 A hydrogen bond is a strong attraction between neighbours that uses a hydrogen atom as a bridge, and it explains why water is liquid

Compare the hydrides of the oxygen family. Hydrogen sulphide, H2S, boils at minus 60 degrees C, hydrogen selenide at minus 41 and hydrogen telluride at minus 2. The trend is clear: heavier molecules boil higher, as dispersion predicts. Water, lighter than all of them, boils at plus 100. Following the trend backwards, water should boil near minus 80, and the Earth would have no oceans.

The cause is the hydrogen bond. In H2O, oxygen pulls the shared electrons hard, leaving each hydrogen as nearly a bare proton with a partial positive charge. That hydrogen is strongly drawn to a lone pair on the oxygen of a neighbouring molecule. The result is a directional bond about 20 kJ per mole, around 4 per cent of the covalent bond it bridges and several times stronger than the dispersion pull between small molecules. The IUPAC definition of 2011 is broader, but nitrogen, oxygen and fluorine are the usual partners, which is why HF, NH3 and H2O all boil far above their families.

Each water molecule has two hydrogens to give and two lone pairs to receive, so it can make four hydrogen bonds. In ice, each molecule holds four neighbours in a tetrahedral pattern, forming open hexagonal rings, which is why snowflakes have sixfold symmetry. That open arrangement has more empty space than the jumbled liquid, so ice is about 8 per cent less dense. Lakes freeze from the top, and the water below stays liquid (the heat and temperature module follows this to the 4 degrees C density peak). The same bond holds the two strands of DNA together (see Structure of DNA).

Data Worked estimates: what the hydrogen bond is worth (calculated)

| Question | Working | Result |
|---|---|---|
| Boiling points down the oxygen family | H2Te -2 C, H2Se -41 C, H2S -60 C | Steps of 39 and 19 degrees |
| Where water would boil without hydrogen bonds | Extend the steps downward: next fall of about 20 degrees | about -80 C |
| Actual boiling point | Measured | 100 C, about 180 degrees higher |
| Energy to boil one mole | NIST value | 40.65 kJ per mole |
| Bond share per molecule | 4 bonds per molecule, each shared by 2 molecules: 2 per molecule | 2 bonds per molecule |
| Energy per hydrogen bond | 40.65 kJ / 2 | about 20 kJ per mole |
| Compare with the O-H bond inside | 463 kJ per mole / 20 kJ per mole | about 23 times stronger |

The estimate is rough: in the vapour all bonds are gone, but in the liquid just below boiling some remain. It lands within the 10 to 40 kJ per mole range quoted for hydrogen bonds between water molecules.
 Source: NIST Chemistry WebBook, Water (enthalpy of vaporisation at the normal boiling point about 40.65 kJ/mol), https://webbook.nist.gov/cgi/cbook.cgi?ID=C7732185 (standard value, quoted as 40.65 kJ/mol, about 2,257 kJ/kg); IUPAC, Definition of the hydrogen bond (IUPAC Recommendations 2011), Pure and Applied Chemistry 83 (2011) 1637-1641, https://media.iupac.org/reports/provisional/abstract11/arunan_310311.html (the task group recommends a definition of the hydrogen bond and a list of experimental and theoretical criteria as evidence for it)  Common misreading

#### 'A hydrogen bond is a real bond like the ones inside the molecule'

It is an attraction between molecules and is 20 times or so weaker than the O-H bond inside one. Boiling water does not break water into hydrogen and oxygen; it breaks only these attractions. That is why boiling is cheap compared with decomposing. The name is a historical label for a strong intermolecular force.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 12, 'Chemical Bonds and Mixtures'
- [IUPAC, Definition of the hydrogen bond (IUPAC Recommendations 2011), Pure and Applied Chemistry 83 (2011) 1637-1641](https://media.iupac.org/reports/provisional/abstract11/arunan_310311.html (the task group recommends a definition of the hydrogen bond and a list of experimental and theoretical criteria as evidence for it)) · web
- [NIST Chemistry WebBook, Water (enthalpy of vaporisation at the normal boiling point about 40.65 kJ/mol)](https://webbook.nist.gov/cgi/cbook.cgi?ID=C7732185 (standard value, quoted as 40.65 kJ/mol, about 2,257 kJ/kg)) · web

### 5.3 Attractions at the surface of a liquid pull it into drops and lift it up fine pores, as in a wick or a damp wall

A water molecule deep inside a drop is pulled equally in all directions. One at the surface has no neighbours above, so it is pulled inward and sideways. The surface behaves like a stretched skin and tries to be as small as possible, which is why free drops are round and a clean needle can float on water. The strength of this skin is called surface tension. Water's is about 72 millinewtons per metre, high because hydrogen bonds are strong. Ethanol, with weaker attractions, has about 22, and mercury, with its metallic bonds, about 470 to 490. See Surface chemistry and adsorption.

Now put the liquid in a very narrow tube. Where it touches the wall the liquid may be pulled towards the glass more strongly than towards itself, which is the case for water on clean glass. The edge climbs, and the surface curves into a cup. The skin, trying to flatten, then pulls the whole column upward until the weight of the lifted liquid balances. The height is h = 2 x surface tension x cos(contact angle) / (density x g x tube radius), and it grows as the tube narrows. This is capillary action. It lifts oil up a lamp wick and water into a towel, and it draws monsoon damp up a brick wall.

Data Worked estimate: capillary rise of water, h = 2 x 0.072 / (1,000 x 9.81 x r) (calculated)

| Tube or pore radius | Working | Rise |
|---|---|---|
| 1 mm (a thin straw) | 0.144 / (9,810 x 0.001) | 1.5 cm |
| 0.1 mm (a hair-fine tube) | 0.144 / (9,810 x 0.0001) | 15 cm |
| 10 micrometres (fine pore in cloth or brick) | 0.144 / (9,810 x 0.00001) | 1.5 m |

Taken for pure water on a perfectly wetted surface at 25 degrees C with contact angle 0, so these are upper limits.
 Source: HyperPhysics, Georgia State University, Surface tension, https://hyperphysics.gsu.edu/hbase/surten.html (water at 20 C 72.8 dynes/cm, ethyl alcohol 22.3, mercury 465; water 72 dynes/cm at 25 C; other tables give mercury near 485)  Worked example

#### How high can water climb through brick?

Brick pores range from about 1 to 10 micrometres across. A pore 10 micrometres across, radius 5, lifts water about 3 m, and one 1 micrometre across about 30 m (calculated), but friction in such fine channels is so great that in practice damp rises to a metre or two before evaporation matches the supply. Hence the damp-proof layer built into a wall.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 12, 'Chemical Bonds and Mixtures'
- [HyperPhysics, Georgia State University, Surface tension](https://hyperphysics.gsu.edu/hbase/surten.html (water at 20 C 72.8 dynes/cm, ethyl alcohol 22.3, mercury 465; water 72 dynes/cm at 25 C; other tables give mercury near 485)) · web

### See it in the table
[H₂O Water](https://www.materialinsights.org/commodities/water/)[Hg Mercury](https://www.materialinsights.org/commodities/mercury/)[H2 Hydrogen](https://www.materialinsights.org/chemicals/hydrogen/)[O2 Oxygen](https://www.materialinsights.org/chemicals/oxygen/)

### Check your understanding

Argon boils at -186 C and xenon at -108 C. Both are single atoms with no polarity. Why does xenon boil higher?
 Dispersion forces rise with the number of electrons and how loosely they are held, both of which are greater in xenon.

Which pair of molecules would you expect to have the largest difference in boiling point for similar masses?
 Ethanol can form hydrogen bonds and dimethyl ether cannot, so with the same atoms they differ by about 100 degrees.

Why is ice less dense than water?
 Each molecule in ice is locked to four neighbours at fixed angles, which leaves gaps. In liquid water the pattern partly collapses and the molecules pack closer.

[← Part 4: Electronegativity, shape and polarity: why water is bent and polar](https://www.materialinsights.org/learn/science/matter-and-bonding/p4/)[Mark read · Part 6: Solutions: dissolving, concentration, soap and hard water →](https://www.materialinsights.org/learn/science/matter-and-bonding/p6/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/matter-and-bonding/index.md)
- [Substances, elements and mixtures: sorting matter by what it is](https://www.materialinsights.org/learn/science/matter-and-bonding/p1/index.md)
- [Phases of matter, phase changes and density](https://www.materialinsights.org/learn/science/matter-and-bonding/p2/index.md)
- [Bonds: why atoms stick together](https://www.materialinsights.org/learn/science/matter-and-bonding/p3/index.md)
- [Electronegativity, shape and polarity: why water is bent and polar](https://www.materialinsights.org/learn/science/matter-and-bonding/p4/index.md)
- [Solutions: dissolving, concentration, soap and hard water](https://www.materialinsights.org/learn/science/matter-and-bonding/p6/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/matter-and-bonding/review/index.md)
