# Momentum, energy and why they are conserved: Conservation of energy: heat, life and machines

Source page: https://www.materialinsights.org/learn/science/momentum-and-energy/p4/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 3: Momentum, energy and why they are conserved](https://www.materialinsights.org/learn/science/momentum-and-energy/) Part 4 of 6

## Conservation of energy: heat, life and machines

Energy changes form constantly, and the total never changes. This part shows the bookkeeping at work on a slide, then tells how it was extended to heat in the 1840s by Joule's paddle wheel, then follows energy through a living body, and ends with machines, which can trade force for distance but cannot create energy.

### 4.1 Energy changes form but the total stays fixed, which predicts speeds without knowing the path

A child at the top of a playground slide has stored energy because of her height. As she slides, height falls and speed rises. Her potential energy turns into kinetic energy. At the bottom, nearly all of it is kinetic, with a little gone to warm the slide and the clothes. The conservation of energy says the total of all forms is constant in a closed system, though it moves between forms.

The bookkeeping lets you find a speed without knowing the shape of the path. If friction is negligible, the energy at the bottom equals the energy at the top: ½ m v² = m g h. The mass cancels, leaving v = square root of (2 g h). That agrees with the free-fall result of the motion module, because a fall through height h gains the same energy whatever the route. A slide, a ramp and a straight drop all give the same final speed.

It also explains Galileo's two-slope thought experiment from the previous module. A ball released from rest on one slope rises on the other side to nearly the same height, whatever the angle of the second slope. It has no more energy than it started with, so it cannot rise higher, and with small friction it reaches almost the same level. A pendulum bob swings the same way: energy moves between height and speed, over and over.

In practice air resistance and friction take a share, so real speeds are lower than the ideal values in the table.

Data Worked estimate: speed at the bottom of a frictionless drop (v = square root of 2 x 9.8 x h)

| Height h | 2 x 9.8 x h | Speed v | In km/h |
|---|---|---|---|
| 5 m (a first-floor balcony) | 98 | 9.9 m/s | about 36 |
| 20 m (a 6-storey building) | 392 | 19.8 m/s | about 71 |
| 80 m | 1,568 | 39.6 m/s | about 143 |

Quadrupling the height only doubles the speed, because the speed goes as the square root of the height.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 4, 'Momentum and Energy'  Common misreading

#### 'A heavier body reaches the bottom faster'

Heavier bodies carry more energy to spend, but they also need more energy to reach the same speed. The two exactly cancel, so a stone and a pebble dropped from the same height arrive with the same speed in a vacuum. The mass drops out of the equation. In air the lighter body is slowed more by drag, which is why a feather lags. Energy bookkeeping and Newton's second law give the same answer, because they are the same physics seen two ways.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 4, 'Momentum and Energy'

### 4.2 Heat is energy of random motion, and Joule's paddle wheel measured the exchange rate

Until the 1840s many scientists pictured heat as a weightless fluid that flowed from hot bodies to cold ones. Friction was awkward for that idea, because rubbing two cold blocks together made heat without any fluid arriving. Several people suggested that heat was a form of motion. The decisive step was to measure how much heat a given amount of work produces.

James Joule, a brewer's son from Salford, near Manchester, built a device in which falling weights turned paddles in a closed vessel of water. The work done by the weights could be calculated from their mass and fall. The water warmed by a fraction of a degree, which Joule measured with very sensitive thermometers. He began in 1843 and refined the method through 1845 and 1847. His full account, read to the Royal Society on 21 June 1849 and printed in 1850, gave 772 foot-pounds of work for each degree Fahrenheit that a pound of water was warmed. In metric units that is about 4,150 joules for 1 kg warmed by 1 K (calculated). Today's value is about 4,186. He repeated the work with mercury and with iron rubbed on iron, and the exchange rate came out similar.

That sameness is the heart of the matter. Julius Mayer had published a first estimate of 3.59 joules per calorie in 1842, and Hermann Helmholtz gave the general mathematics in 1847. Heat from friction, from paddles and from rubbing metals all pointed to a single rate, so heat was energy in transit and not a separate substance. This is the first law of thermodynamics, treated in that node.

Data Worked estimate: Joule's exchange rate in metric units, and a waterfall

| Step | Working | Result |
|---|---|---|
| Joule's work for 1 pound of water, 1 degree F | 772 foot-pounds | 772 ft lb |
| In joules | 772 x 1.356 | about 1,047 J |
| Mass and temperature step | 1 lb = 0.4536 kg; 1 degree F = 0.5556 K | 0.252 kg K |
| Heat needed per kg per kelvin | 1,047 / 0.252 | about 4,150 J/kg/K |
| Modern value for water | published figure | about 4,186 J/kg/K |
| Warming of water falling 100 m, all energy to heat | 9.8 x 100 / 4,186 | about 0.23 K |

Joule's result was within about 1 per cent of the modern value.
 Source: Joule, J. P., 'On the Mechanical Equivalent of Heat', Philosophical Transactions of the Royal Society 140 (1850), https://www2.lawrence.edu/fast/STONEKIM/COURSES/Joule_1850.pdf (read June 1849; 772 foot-pounds per pound per degree Fahrenheit; water, mercury, cast iron)  Common misreading

#### 'Friction destroys energy'

A brake pad stops a wheel, and the wheel's kinetic energy is gone. But the pad and the disc are hotter. The energy of the wheel's motion has been spread into random atomic motion. A drop from 100 m into a pool raises the water by about 0.23 K if all the energy goes to heat (9.8 x 100 / 4,186). The rise is small because water holds heat well, not because energy vanished. It is also why Joule needed such careful thermometers.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 4, 'Momentum and Energy'
- [Joule, J. P., 'On the Mechanical Equivalent of Heat', Philosophical Transactions of the Royal Society 140 (1850)](https://www2.lawrence.edu/fast/STONEKIM/COURSES/Joule_1850.pdf (read June 1849; 772 foot-pounds per pound per degree Fahrenheit; water, mercury, cast iron)) · web
- [Encyclopedia.com, Mayer, Julius Robert (1814-1878)](https://www.encyclopedia.com/environment/encyclopedias-almanacs-transcripts-and-maps/mayer-julius-robert-1814-1878 (1842 paper; 3.59 J/cal; Helmholtz 1847)) · web

### 4.3 Living things keep the same ledger: sunlight becomes glucose, and glucose becomes movement and heat

Every movement you make is paid for in chemical energy, and the usual currency is the sugar glucose (C₆H₁₂O₆). Plants build it from carbon dioxide and water with the energy of sunlight, the process of the Photosynthesis node, and store much of it as starch. When you eat the plant, digestion breaks the starch back into glucose. Small structures inside each cell, the mitochondria, then combine it with oxygen and release the stored energy. That release is called cellular respiration.

The ledger is the same as for any other machine. A gram of carbohydrate releases about 17 kJ when the body uses it, and a gram of fat about 37 kJ. A person who eats 2,000 kilocalories a day is taking in about 8.4 million joules, and spread over 24 hours that is about 97 watts, close to the 100 W for sustained effort. Nearly all of it ends as heat, which is why people in a packed hall warm it noticeably, and why the body must lose heat to stay near 37 °C.

Muscle does the conversion to movement with limited efficiency: textbooks put the whole body at about 25 per cent, and nearer 20 for climbing stairs. Taking a quarter, a person who climbs 10 m of stairs, doing 6.9 kJ of work, spends about 27 kJ of food energy, which is about 1.6 g of carbohydrate. The rest becomes warmth.

Process flowchart From sunlight to a person climbing stairs Inputs **Sunlight on a wheat field**energy arrives as light Process steps 1 **Photosynthesis in the leaf**

light to chemical energy in sugars and starch
 2 **A meal of chapati and dal**

starch broken to glucose, about 17 kJ per gram of carbohydrate
 3 **Muscle cells**

chemical energy to motion; about a quarter reaches the work (textbook figure)
 Outputs **Climb of 10 m for 70 kg**6.9 kJ of potential energy **Heat to the surroundings**about 20 kJ in this example

Each stage obeys the same rule: the energy out equals the energy in, shared between a useful part and heat.
 Source: FAO, Food energy: methods of analysis and conversion factors, https://www.fao.org/3/y5022e/y5022e05.htm (carbohydrate 17 kJ/g, 4 kcal/g; fat 37 kJ/g)  In the data

#### Where the sunlight goes

A plant does not store most of the sunlight that falls on it. Much is reflected, passes through, or warms the leaf and evaporates water. Only a small share is locked into sugars, yet it is that small share that feeds nearly every food chain. When you eat a chapati, you are using energy that reached a wheat field months earlier as light. Understanding Energy follows this chain from the Sun through plants and fossil fuels, and the later modules of this course open up the cell itself.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 4, 'Momentum and Energy'
- [FAO, Food energy: methods of analysis and conversion factors](https://www.fao.org/3/y5022e/y5022e05.htm (carbohydrate 17 kJ/g, 4 kcal/g; fat 37 kJ/g)) · web
- [Princeton University, Human power generation](https://www.princeton.edu/~maelabs/hpt/pro/human_3.htm (about 100 W reliable steady output)) · web
- [Davis, L., Body Physics: Motion to Metabolism, section 10.9, 'Efficiency of the Human Body' (Open Oregon Educational Resources)](https://phys.libretexts.org/Bookshelves/Conceptual_Physics/Body_Physics_-_Motion_to_Metabolism_(Davis)/10%3A_Powering_the_Body/10.09%3A_Efficiency_of_the_Human_Body (human body about 25 per cent; 20 per cent assumed for stairs)) · web

### 4.4 Machines trade force for distance and never create energy, which is why perpetual motion fails

A lever, a ramp, a pulley and a screw all do one thing. They let a small force act over a long distance in order to move a large force over a short one. In the ideal case the work in equals the work out: force x distance on one side matches force x distance on the other. The Lever and mechanical advantage node shows the lever case in detail.

A ramp is the easiest to estimate. To raise a 120 kg sack onto a truck bed 1 m high, lifting straight up needs 1,176 N over 1 m, or 1,176 J. A 4 m plank needs only a quarter of the force, 294 N, but over 4 m. The work is the same, 1,176 J. Real machines have friction. If friction takes a fifth of the energy you put in, the machine is 80 per cent efficient. Efficiency is useful work out divided by energy in. For the same job you must then push with 294 / 0.8, about 368 N, and the 'lost' fifth appears as heat in the plank and the sack.

Since no machine can output more work than it takes in, any scheme for a machine that makes its own energy must fail. Orffyreus showed a self-turning wheel in Germany from 1712, and it was only exposed in 1727, when his maid told how a person in the next room had been turning it. In 1775 the Paris Academy of Sciences announced that it would no longer examine perpetual motion schemes. The engineering module Force, motion and energy works through gears, pulleys and losses in depth.

Data Worked estimate: raising a 120 kg sack by 1 m with a 4 m ramp

| Quantity | Straight lift | Ideal ramp | Ramp with 80 per cent efficiency |
|---|---|---|---|
| Force needed | 1,176 N | 294 N | about 368 N |
| Distance moved by the pusher | 1 m | 4 m | 4 m |
| Work done by the pusher | 1,176 J | 1,176 J | about 1,470 J |
| Energy gained by the sack | 1,176 J | 1,176 J | 1,176 J |
| Heat produced | 0 | 0 | about 294 J |

Friction does not change the sack's gain. It makes the pusher do more work, and the difference is heat.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 4, 'Momentum and Energy'  Common misreading

#### 'A machine that multiplies force multiplies energy'

A long lever can turn your 80 N push into a 1,200 N lift. That multiplies force, not energy, because the load moves fifteen times less far than your hand. A machine that doubled the force with the distance unchanged would deliver more energy than it received, and none ever has. Asking of any device 'what is the distance trade?' catches most false claims quickly. Efficiency can only be below 100 per cent for real machines. Understanding Energy's module on efficiency and recovery lists typical values.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 4, 'Momentum and Energy'
- [David Darling, Encyclopedia of Science, 'perpetual motion'](https://www.daviddarling.info/encyclopedia/P/perpetual_motion.html (Paris Academy, 1775)) · web
- [The mechanical career of Councillor Orffyreus, confidence man (arXiv:1301.3097)](https://arxiv.org/pdf/1301.3097 (wheel from 1712; maid's account 1727)) · web

### See it in the table
[H₂O Water](https://www.materialinsights.org/commodities/water/)[Hg Mercury](https://www.materialinsights.org/commodities/mercury/)[Wh Wheat](https://www.materialinsights.org/commodities/wheat/)[Su Sugar](https://www.materialinsights.org/commodities/sugar/)[O2 Oxygen](https://www.materialinsights.org/chemicals/oxygen/)[CO2 Carbon dioxide](https://www.materialinsights.org/chemicals/carbon_dioxide/)

### Check your understanding

A ball is dropped from 45 m in a vacuum. Using energy conservation (g = 9.8 m/s²), roughly what is its speed at the ground?
 v = square root of (2 x 9.8 x 45) = square root of 882, about 29.7 m/s, so about 30 m/s. The mass of the ball does not matter.

What did Joule's repeated experiments with water, mercury and iron show?
 Different materials gave nearly the same exchange rate between work and heat, which supports heat being energy in transit and not a separate fluid.

A machine takes in 500 J and delivers 400 J of useful work. What happens to the other 100 J?
 Energy is conserved. The missing 100 J is heat from friction, and efficiency = 400 / 500 = 80 per cent.

[← Part 3: Collisions: two bookkeepers, and how they were found](https://www.materialinsights.org/learn/science/momentum-and-energy/p3/)[Mark read · Part 5: Why momentum and energy are conserved: symmetry →](https://www.materialinsights.org/learn/science/momentum-and-energy/p5/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/momentum-and-energy/index.md)
- [Momentum: what a push leaves behind](https://www.materialinsights.org/learn/science/momentum-and-energy/p1/index.md)
- [Work, energy and power](https://www.materialinsights.org/learn/science/momentum-and-energy/p2/index.md)
- [Collisions: two bookkeepers, and how they were found](https://www.materialinsights.org/learn/science/momentum-and-energy/p3/index.md)
- [Why momentum and energy are conserved: symmetry](https://www.materialinsights.org/learn/science/momentum-and-energy/p5/index.md)
- [The neutrino: the case that saved conservation](https://www.materialinsights.org/learn/science/momentum-and-energy/p6/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/momentum-and-energy/review/index.md)
