# Motion and force: from Aristotle to Newton: Describing motion: speed, velocity, acceleration and free fall

Source page: https://www.materialinsights.org/learn/science/motion-and-force/p2/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 2: Motion and force: from Aristotle to Newton](https://www.materialinsights.org/learn/science/motion-and-force/) Part 2 of 6

## Describing motion: speed, velocity, acceleration and free fall

Before asking what causes motion, we need exact words for it. Three quantities do the work: speed, velocity and acceleration. They are easy to mix up, and most errors in mechanics start there. This part defines them from everyday journeys, then uses them on the simplest motion of all, a body falling freely, and shows how a jumper's time in the air follows from the height reached.

### 2.1 Speed says how fast, velocity also says which way, and the difference matters

Speed is distance covered divided by the time taken. A taxi that covers 150 km from Mumbai to Pune in 3 hours has an average speed of 150 / 3 = 50 km/h. The speedometer, though, shows something else: the speed at one instant. Over the trip the instantaneous speed varied from zero at a toll plaza to perhaps 100 km/h on an open stretch, and the average smooths all of that out. For steady motion, the two are the same.

Velocity is speed together with direction. Two cars each doing 60 km/h, one north and one south, have the same speed and opposite velocities. We say velocity is constant only when both speed and direction are constant. That is a strict condition. A car going round a roundabout at a steady 30 km/h has constant speed but changing velocity, because its direction changes all the time.

Why bother with the distinction? Because nature responds to velocity, not speed. A force that pushes sideways on a moving body changes its direction. The word that captures every such change is acceleration, taken up in the next section.

One can also confuse distance and displacement. Distance is the length of the route you took. Displacement is the straight-line change of position from start to end, with a direction. If you walk once round a 400 m athletics track, you have travelled 400 m but your displacement is zero. Average velocity, which is displacement divided by time, is also zero. Average speed, which is distance divided by time, is not.

Data Typical speeds, worked out in metres per second

| Case | Speed in km/h | Speed in m/s | How to convert |
|---|---|---|---|
| Brisk walk | 5 | 1.4 | 5 / 3.6 |
| Cycling | 18 | 5 | 18 / 3.6 |
| Highway car | 90 | 25 | 90 / 3.6 |
| Passenger jet cruising | 900 | 250 | 900 / 3.6 |

To change km/h into m/s, divide by 3.6, because 1 km/h is 1000 m in 3600 s.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 2, 'Describing Motion'  Worked example

#### Average and instantaneous speed on a road trip

A driver covers the first 60 km in 1 hour and, stuck behind lorries on a ghat, the next 60 km in 2 hours. Total: 120 km in 3 hours, so 40 km/h on average. Do not average the two stretch speeds (60 and 30 km/h) and call the result 45: the slower stretch took twice as long and so counts for more. Always take total distance over total time.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 2, 'Describing Motion'

### 2.2 Acceleration is the rate at which velocity changes, whether by speeding up, slowing down or turning

If velocity changes, the body accelerates. Acceleration is the change in velocity divided by the time over which it happens. The unit follows from the definition. If velocity changes by 1 metre per second every second, the acceleration is 1 metre per second per second, written 1 m/s². Say it slowly and it makes sense: each second, the speed goes up by 1 m/s.

In everyday speech, acceleration means speeding up. In physics it covers three cases. Speeding up is positive acceleration along the motion. Slowing down is acceleration against the motion, often called deceleration. Turning is acceleration sideways, even when the speed stays the same.

Take a car that reaches 100 km/h from rest in 10 s. Convert first: 100 km/h is about 27.8 m/s. The average acceleration is 27.8 / 10, or about 2.8 m/s². Now a driver who brakes from 72 km/h (20 m/s) to a stop in 4 s has an acceleration of (0 - 20) / 4 = -5 m/s². The sign is negative because the change in velocity points opposite to the motion.

The turning case is the surprising one. Picture a runner circling a 400 m track at a steady 8 m/s. A circle of circumference 400 m has radius about 64 m. The sideways acceleration needed to keep her on the curve is speed squared over radius: 8 x 8 / 64 = 1 m/s². Her speed never changes, but her velocity does, and she must be pushed inwards all the time, by friction from the ground on her shoes.

Data Accelerations you can check on paper

| Case | Change in velocity | Time | Acceleration |
|---|---|---|---|
| Car from 0 to 100 km/h | 27.8 m/s | 10 s | 2.8 m/s² |
| Car braking from 72 km/h to rest | -20 m/s | 4 s | -5 m/s² |
| Runner on a 64 m radius bend at 8 m/s | direction changes | continuous | 1 m/s² (speed squared / radius) |
| Stone dropped from rest | 9.8 m/s each second | 1 s | 9.8 m/s² |

 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 2, 'Describing Motion'  Common misreading

#### 'Zero speed means zero acceleration'

A ball thrown straight up stops for an instant at the top. Its speed is zero there, yet its velocity is changing by about 10 m/s every second, as before and after. If its acceleration really were zero at the top, it would stay there. Acceleration depends on how velocity is changing, not on what velocity happens to be.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 2, 'Describing Motion'

### 2.3 In free fall every body gains speed at the same rate, and that fixes how long a jump lasts

Free fall means falling with gravity as the only force, so air does not matter. Dropped from rest, a body gains about 9.8 m/s of speed every second, whatever its mass. After 1 s it is moving at about 10 m/s, after 2 s at 20 m/s, after 3 s at 30 m/s. Since the speed grows steadily from zero, the average speed over a fall of time t is half the final speed, so the distance fallen is half of g times t squared. This is exactly the odd-number pattern from Galileo's ramps.

How far does a stone fall from a 20 m high bridge parapet? Solve 20 = 0.5 x 9.8 x t². Then t² is about 4.1 and t is about 2.0 s. The speed at the bottom is 9.8 x 2.0, about 20 m/s, or 71 km/h. That is a good number to feel: a 20 m drop, about a six-storey building, reaches highway speed.

Does air stop this being true in practice? Yes, for feathers. The cleanest test came on 2 August 1971, when David Scott, commander of Apollo 15, dropped a 1.32 kg geological hammer and a falcon feather together from about 1.6 m, in front of the television camera. The Moon has no air, and both reached the surface at the same moment. It was Galileo's claim, demonstrated in the right place.

Hang time follows. A dancer or a basketball player seems to hover, but the time in the air is fixed by how high the body's centre rises. A jumper who rises a height h spends a time sqrt(2h/g) going up and the same coming down. For h = 0.5 m, going up takes sqrt(1 / 9.8) = 0.32 s, so the whole jump lasts about 0.64 s. A rise of a full metre, beyond almost anyone standing still, would give only 0.9 s. The sense of floating comes from the horizontal motion, which carries on at constant speed and fools the eye.

Data How long a drop takes, and how fast it ends, in a vacuum (calculated, g = 9.8 m/s²)

| Height of drop | Time to fall | Speed at the bottom |
|---|---|---|
| 2 m (a high shelf) | 0.64 s | 6.3 m/s (23 km/h) |
| 10 m (about three storeys) | 1.43 s | 14.0 m/s (50 km/h) |
| 30 m (about ten storeys) | 2.47 s | 24.2 m/s (87 km/h) |
| 100 m | 4.52 s | 44.3 m/s (159 km/h) |

Time = sqrt(2h / g); speed = sqrt(2gh). Ten times the height gives only about three times the time, since the square root of 10 is 3.16. In air, a stone falling 100 m ends a little slower and a person a good deal slower.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 2, 'Describing Motion'  In the data

#### Hang time against jump height (calculated, g = 9.8 m/s²)

Height 0.2 m: 0.40 s in the air. 0.5 m: 0.64 s. 0.8 m: 0.81 s. 1.0 m: 0.90 s. Quadrupling the height from 0.2 m to 0.8 m only doubles the time, because the time goes as the square root of the height. The take-off speed needed for 0.5 m is sqrt(2 x 9.8 x 0.5), about 3.1 m/s.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 2, 'Describing Motion'
- [NASA NSSDCA, Apollo 15 Hammer-Feather Drop](https://nssdc.gsfc.nasa.gov/planetary/lunar/apollo_15_feather_drop.html (1.32 kg hammer, falcon feather, about 1.6 m, same acceleration)) · web
- [Encyclopaedia Britannica, video: David Scott, Apollo 15, falcon feather and hammer](https://britannica.com/video/148908/David-Scott-Apollo-15-falcon-feather-hammer-Aug-2-1971 (2 August 1971)) · web

### Check your understanding

A car moves round a bend at a steady 40 km/h. Which statement is right?
 Velocity includes direction, which is changing. A change of direction is an acceleration even when the speed holds steady.

A cyclist covers 12 km in 30 minutes. What is her average speed?
 Total distance over total time: 12 km in 0.5 h is 24 km/h. Remember to convert minutes into hours.

A stone is dropped from rest and falls for 3 s with no air resistance. About how fast is it moving?
 Speed equals g x t, which is about 9.8 x 3 = 29 m/s. The figure 44 is the distance fallen in metres.

[← Part 1: Why Aristotle was wrong and Galileo was right: the idea of inertia](https://www.materialinsights.org/learn/science/motion-and-force/p1/)[Mark read · Part 3: Forces in balance: net force, support and friction →](https://www.materialinsights.org/learn/science/motion-and-force/p3/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/motion-and-force/index.md)
- [Why Aristotle was wrong and Galileo was right: the idea of inertia](https://www.materialinsights.org/learn/science/motion-and-force/p1/index.md)
- [Forces in balance: net force, support and friction](https://www.materialinsights.org/learn/science/motion-and-force/p3/index.md)
- [Newton's first two laws: force, mass and acceleration](https://www.materialinsights.org/learn/science/motion-and-force/p4/index.md)
- [Forces come in pairs: Newton's third law](https://www.materialinsights.org/learn/science/motion-and-force/p5/index.md)
- [Vectors and the Newtonian synthesis](https://www.materialinsights.org/learn/science/motion-and-force/p6/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/motion-and-force/review/index.md)
