# Waves: sound, light, colour and the wave-particle puzzle: What a wave is: a pattern that travels while the material stays

Source page: https://www.materialinsights.org/learn/science/waves-sound-light/p1/

[All courses](https://www.materialinsights.org/learn/) / [Understanding Science](https://www.materialinsights.org/learn/science/) / [Module 7: Waves: sound, light, colour and the wave-particle puzzle](https://www.materialinsights.org/learn/science/waves-sound-light/) Part 1 of 6

## What a wave is: a pattern that travels while the material stays

Sound, light, ripples and earthquakes look unrelated, yet they share one anatomy. This part defines the few quantities that describe every wave, separates the two basic ways a medium can be shaken, and shows what fixes a wave's speed. These ideas carry the rest of the module, and they connect to the vibration of machines in Understanding Engineering.

### 1.1 A wave is a disturbance that travels, carrying energy from place to place without carrying material

At a cricket ground the crowd in one stand rises and sits in turn, and a 'Mexican wave' sweeps right round the stadium. Nobody leaves their seat. What travels is the pattern of rising and sitting, and with it energy. That is a wave: a disturbance handed on from each part of a medium to the next.

Five quantities describe a simple wave. The amplitude is the largest displacement from the resting position. The wavelength, written with the Greek letter lambda, is the distance from one crest to the next. The period is the time for one full cycle at a fixed point. The frequency is the number of cycles per second, measured in hertz (Hz), after Heinrich Hertz, and it is one divided by the period. The speed is how fast the pattern moves.

The speed follows from the other two without any new physics. In one period the pattern advances exactly one wavelength, so speed = wavelength / period = frequency x wavelength. This holds for every wave of regular shape, from a rope to a radio signal.

Amplitude tells you how much energy a wave carries. The energy goes with the square of the amplitude, so a swell twice as high carries four times the energy in each metre of its crest.

Data Worked estimate: speed = frequency x wavelength

| Wave | Frequency | Wavelength | Speed |
|---|---|---|---|
| Rope shaken twice per second by a child | 2 Hz | 1.5 m | 2 x 1.5 = 3 m/s |
| Note A above middle C, in air at 20 °C | 440 Hz | 343 / 440 = 0.78 m | 343 m/s |
| A deep bass note, in air at 20 °C | 55 Hz | 343 / 55 = 6.2 m | 343 m/s |
| Ocean swell with a 10 s period | 0.1 Hz | about 156 m (deep-water rule, 1.56 x period²) | 0.1 x 156 = 15.6 m/s, about 56 km/h |

Calculated. Sound speed from the table in the next part; the swell wavelength comes from the deep-water relation, wavelength = g x period² / (2 x pi).
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 8, 'Waves, Sound and Light'  Common misreading

#### A water wave carries the water along

Float beyond the breaking surf and the swell lifts you, lowers you and lifts you again, but does not carry you ashore. The water under you moves in small loops as each crest passes and, apart from a slow drift, stays put. A current is a different thing. Only the energy and the pattern travel, which is how swell from a storm near Antarctica can reach Kerala.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 8, 'Waves, Sound and Light'

### 1.2 Transverse waves shake the medium across the direction of travel, longitudinal waves shake it along that direction

Flick a garden hose lying on a lawn sharply sideways. A kink runs along it, but each bit of hose moves sideways, at right angles to the way the kink travels. This is a transverse wave. Now watch a shunting engine nudge a long line of goods wagons. The jolt runs down the train coupling by coupling, and each wagon lurches forward and back along the track, the same line the jolt travels. This is a longitudinal wave. In a gas it appears as compressions, where molecules crowd together, and rarefactions, where they spread apart.

Sound in air is longitudinal. A vibrating surface pushes the air in front of it, then leaves a thinner region behind. Light is transverse, and in a special way: the thing that shakes is the strength of the electric and magnetic fields, not any material, and both fields point across the direction of travel.

The two kinds differ in what they need from a medium. A longitudinal wave needs the medium to resist squeezing, and every solid, liquid and gas does. A transverse wave needs the medium to resist sideways sliding, which only solids do well. Liquids and gases flow instead of springing back.

Earthquakes show this clearly. They send out fast longitudinal P waves and slower transverse S waves. P waves pass through rock and liquid alike, but S waves stop at liquid. Seismographs that failed to record S waves on the far side of the Earth told geologists in the early twentieth century that part of the deep interior is liquid. See the node 'Seismic waves'.

Data Worked estimate: how far away was the earthquake?

| Gap between P and S arrival | Working (P 6.0 km/s, S 3.5 km/s, typical crust) | Distance |
|---|---|---|
| 5 s | distance x (1/3.5 - 1/6.0) = 5, so distance = 5 x 8.4 | about 42 km |
| 10 s | 10 x 8.4 | about 84 km |
| 20 s | 20 x 8.4 | about 170 km |
| 40 s | 40 x 8.4 | about 340 km |

Calculated. 1/3.5 - 1/6.0 = 0.119 s/km, so distance = gap / 0.119, about 8.4 km for each second of gap. Real crust varies, so the rule is rough.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 8, 'Waves, Sound and Light'  Common misreading

#### Every wave needs something to wave in

Sound cannot cross a vacuum, and nineteenth-century physicists assumed light must therefore need an invisible medium, the ether. In 1887 Michelson and Morley looked for the Earth's motion through it and found none. Maxwell's picture gave light something to be a wave of: electric and magnetic fields, which exist in empty space. Sound needs matter. Light and radio do not.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 8, 'Waves, Sound and Light'

### 1.3 A wave's speed is set by the medium's stiffness and inertia, not by the source, which is why a tsunami can match a jet

Pull a guitar string tighter and a pulse races along it faster. In general a wave moves faster when the medium pulls back harder on a disturbance (stiffer) and slower when the medium is harder to set moving (heavier). Speed is stiffness over inertia, in a form that depends on the kind of wave.

The source does not choose the speed. Shake a rope harder and you get bigger waves, not faster ones. Shake it faster and you get more waves per second, which must be shorter, because speed stays put and speed = frequency x wavelength. When a wave moves from one medium into another, the frequency stays fixed, since the same source is still beating time, while the speed and wavelength change together.

Ocean waves give a striking case. For waves much longer than the water is deep, the restoring pull is gravity and the moving mass is the water column, and the speed works out as the square root of g x depth. A tsunami has a wavelength of tens or hundreds of kilometres, so even the open ocean is shallow to it. In 4,000 m of water its speed is about 200 m/s, near 700 km/h, the cruising speed of a jet airliner. As the sea shoals the front slows, the energy piles into less water, and the wave grows taller.

The 26 December 2004 Sumatra earthquake sent such waves across the Bay of Bengal. They took almost two hours to reach the Tamil Nadu coast, a delay that a simple calculation predicts.

Data Worked estimate: a tsunami crossing the Bay of Bengal (speed = square root of g x depth, g = 9.8 m/s²)

| Depth of water | Speed | In km/h |
|---|---|---|
| 4,000 m, open ocean | square root of (9.8 m/s² x 4,000 m) = square root of 39,200 m²/s² = 198 m/s (calculated) | about 713 (calculated) |
| 3,000 m, a typical depth in the Bay | square root of 29,400 m²/s² = 171 m/s (calculated) | about 617 (calculated) |
| 200 m, continental shelf | square root of 1,960 m²/s² = 44 m/s (calculated) | about 159 (calculated) |
| 20 m, near the beach | square root of 196 m²/s² = 14 m/s (calculated) | about 50 (calculated) |
| Crossing 1,500 km of deep water at about 200 m/s | 1,500,000 m / 200 m/s = 7,500 s (calculated) | about 2.1 hours (calculated) |

Calculated for round numbers. The fault broke for well over 1,000 km northwards towards the Andaman Islands, so the nearest part of the source was roughly 1,500 km from the Tamil Nadu coast; the observed travel time of almost two hours is from DT Next (2024). Real depth varies along the path.
 Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 8, 'Waves, Sound and Light'  Common misreading

#### A louder or higher note travels faster

If pitch or loudness changed the speed of sound, music would arrive scrambled: at the back of a stadium, a drum's thump and a flute's high note, played together, would reach you at different moments. They arrive together, so the speed depends on the air and not on the note.

- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 8, 'Waves, Sound and Light'
- [DT Next, 20 years after killer tsunami, Tamil Nadu goes from ill-prepared to well-equipped (December 2024)](https://www.dtnext.in/news/tamilnadu/20-years-after-killer-tsunami-tamil-nadu-goes-from-ill-prepared-to-well-equipped-816736 (waves took almost 2 hours to reach the Tamil Nadu coast; magnitude 9.1)) · web

### See it in the table
[H₂O Water](https://www.materialinsights.org/commodities/water/)[Wv Ocean waves](https://www.materialinsights.org/energy/e_waves/)

### Check your understanding

A bass note of 55 Hz travels in air at 343 m/s. What is its wavelength?
 Wavelength = speed / frequency = 343 / 55, about 6.2 m.

A rope is shaken twice as fast. Its wave speed along the rope stays the same. What happens to the wavelength?
 Speed = frequency x wavelength. With speed fixed, doubling the frequency halves the wavelength.

Which statement about S waves from an earthquake is correct?
 S waves are transverse and need a medium that resists sideways sliding. They travel through solid rock but stop at liquid.

[← Module contents](https://www.materialinsights.org/learn/science/waves-sound-light/)[Mark read · Part 2: Sound: pressure waves, loudness, resonance and moving sources →](https://www.materialinsights.org/learn/science/waves-sound-light/p2/)

## Other sections

- [Module overview](https://www.materialinsights.org/learn/science/waves-sound-light/index.md)
- [Sound: pressure waves, loudness, resonance and moving sources](https://www.materialinsights.org/learn/science/waves-sound-light/p2/index.md)
- [Light: its speed, its spectrum, and what happens when it meets matter](https://www.materialinsights.org/learn/science/waves-sound-light/p3/index.md)
- [Bending light and making colour: refraction, rainbows, blue skies and mixing](https://www.materialinsights.org/learn/science/waves-sound-light/p4/index.md)
- [Waves meeting waves: interference, diffraction, Young's experiment and polarisation](https://www.materialinsights.org/learn/science/waves-sound-light/p5/index.md)
- [The photoelectric effect and the wave-particle puzzle](https://www.materialinsights.org/learn/science/waves-sound-light/p6/index.md)
- [Key terms, quiz and sources](https://www.materialinsights.org/learn/science/waves-sound-light/review/index.md)
