# Aircraft engine: Bill of materials

Source page: https://www.materialinsights.org/products/p_aircraft_engine/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

Per turbofan for a single-aisle airliner. The only opened material inventory is for the IAE V2500, an earlier-generation A320 engine of the same thrust class in service since 1989 ^[55]: a 2025 study calculates 1,956 kg against 2,404 kg on its type certificate, leaving out some accessories and systems and the gearbox, and not counting composites or coatings ^[1]. Shares are calculated from its module table. The LEAP and GTF add composite fan parts. Engine spare parts and nacelles are not yet nodes.

as of 2026-11-15

#### Components

The products inside one unit, with quantity, mass share and cost share
 Variant **Turbofan**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Carbon fibre and composite parts](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/) | Component | Not given | – |
| The LEAP fan has 18 one-piece woven carbon-fibre blades inside a composite fan case, and the all-composite fan system cuts aircraft weight by 1,000 lb against an all-metal one ^[4]. The V2500 inventory counts no composites ^[1]. No mass or cost share of the composite parts was found. |  |  |  |

as of 2026-11-15

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant **Turbofan**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Ti Titanium](https://www.materialinsights.org/commodities/titanium/) | Structural | 983 kg | **50.3%** |
| Calculated from the module masses and titanium alloy shares in Table 1 of the V2500 inventory ^[1]; titanium alloy mass, not pure metal. |  |  |  |
| [Ni Nickel](https://www.materialinsights.org/commodities/nickel/) | Functional | 879 kg | **44.9%** |
| Calculated from Table 1 of the V2500 inventory: nickel-base alloys make up most of the hot-section modules and part of the compressor ^[1]; alloy mass, not pure nickel. |  |  |  |
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Structural | 65 kg | **3.3%** |
| Calculated from Table 1 of the V2500 inventory: steel is a small share of two modules ^[1]. |  |  |  |
| [Co Cobalt](https://www.materialinsights.org/commodities/cobalt/) | Functional | 26 kg | **1.3%** |
| Calculated from Table 1 of the V2500 inventory: cobalt-base alloy is a small share of two hot-section modules ^[1]; alloy mass, not pure cobalt. |  |  |  |

as of 2026-11-15

#### Cost breakdown

The share of the unit's cost in each component or stage

| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Life-limited parts of the fan and low-pressure compressor (three parts), share of the LEAP-1A set's list price | 15.2% | Turbofan | 2022 | ^[3] calculated from USD 0.85 million of 5.58 million |
| Life-limited parts of the low-pressure turbine (eight parts), share of the set's list price | 34.6% | Turbofan | 2022 | ^[3] calculated from USD 1.93 million |
| Life-limited parts of the high-pressure compressor (seven parts), share of the set's list price | 27.2% | Turbofan | 2022 | ^[3] calculated from USD 1.52 million |
| Life-limited parts of the high-pressure turbine (five parts), share of the set's list price | 22.9% | Turbofan | 2022 | ^[3] calculated from USD 1.28 million |

as of 2026-11-15

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Metal parts from suppliers | Specialty alloy suppliers cast and forge the metal parts, which are then machined; in India, HAL has signed a multi-year deal to make ring forgings for the LEAP. | Numerical control machining | ^[1]^[19] |
| Composite fan | The fan blades and case are one-piece woven carbon-fibre composite, and each blade gets a titanium leading edge for durability. | Carbon fibre composites | ^[4] |
| Fuel nozzles | The LEAP's fuel nozzle is made by additive manufacturing. | Additive manufacturing (3D printing) | ^[4] |
| Modules | In CFM's split, GE builds the core (high-pressure compressor, high-pressure turbine and combustor) and Safran the fan, accessory gearbox and low-pressure compressor and turbine. | – | ^[46] |
| Final assembly | Safran assembles LEAP-1A engines for Airbus at Villaroche in France, GE's US plants build the LEAP-1B, and MTU in Munich carries out final assembly of one-third of production PW1100G-JM engines for the A320neo. | – | ^[46]^[5]^[47] |

as of 2026-11-15

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [CFR Carbon fibre composites](https://www.materialinsights.org/technologies/carbon_fibre_composites/) Woven carbon-fibre fan blades and fan case Used in every LEAP fan ^[4].
- [3DP Additive manufacturing (3D printing)](https://www.materialinsights.org/technologies/additive_manufacturing/) LEAP fuel nozzle CFM was first in the industry to make such a part this way ^[4].
- [CNC Numerical control machining](https://www.materialinsights.org/technologies/cnc_machining/) Machining of forged and cast metal parts Machining is one of the steps counted in the V2500 inventory, alongside forging and casting ^[1].

as of 2026-11-15

#### Technologies inside it

The technologies inside the product, with how much of each per unit
 Embodies

- [CCGT Gas turbines and combined cycle](https://www.materialinsights.org/technologies/e_gas_turbines/) 1 gas turbine core Turbofan A turbofan is a gas turbine core with a fan added; the cycle is described in the twin technology node.
- [Jet Aviation propulsion](https://www.materialinsights.org/technologies/e_aviation/) 1 propulsion unit Turbofan The engine is the aviation propulsion technology in the form of one unit.
- [Ger Gear train](https://www.materialinsights.org/technologies/gear_train/) 1 fan gear system Turbofan, geared (GTF) The GTF has a gear system between the fan and the low-pressure compressor and turbine ^[45].

as of 2026-11-15

#### Sources

1. [Life Cycle Assessment of Turbofan Engines: A Reverse Engineering Approach (Oestreicher et al.), Procedia CIRP 135](https://elib.dlr.de/215424/1/Oestreicher_2025_Life%20Cycle%20Assessment%20of%20Turbofan%20Engines%20-%20A%20Reverse%20Engineering%20Approach.pdf) German Aerospace Center (DLR) repository, 2025
2. [LEAP-1A in-service performance update (Aircraft Commerce, issue 145, December 2022/January 2023)](https://aircraft-commerce.com/wp-content/uploads/aircraft-commerce-docs/General%20Articles/2023/145_MTCE_A.pdf) Aircraft Commerce, 2023
3. [A quantum leap forward (CFM International LEAP engine)](https://www.aero-mag.com/cfm-international-leap-engine-high-bypass-turbofan-engine) Aero Magazine
4. [Pratt & Whitney GTF engine](https://mtu.de/engines/commercial-aircraft-engines/narrowbody-and-regional-jets/gtf-engine-family) MTU Aero Engines
5. [HAL joins LEAP engine supply chain: why is the deal with Safran important for India](https://www.theweek.in/news/defence/2026/07/23/hal-joins-leap-engine-supply-chain-why-is-the-deal-with-safran-important-for-india.html) The Week, 2026
6. [Performance Extraordinaire (PurePower PW1000G), SPs Airbuz issue 1](https://www.spsairbuz.com/story/?id=545) SP's Airbuz, 2016
7. [CFM International at 50: sharing everything, how CFM engines are produced](https://flightglobal.com/paid-content/cfm-international-at-50-sharing-everything-how-cfm-engines-are-produced/160571.article) FlightGlobal, 2024
8. [RTX's Pratt & Whitney and MTU Aero Engines strengthen GTF MRO network collaboration](https://www.rtx.com/news/news-center/2025/04/08/rtxs-pratt-whitney-and-mtu-aero-engines-strengthen-gtf-mro-network-collaborati) RTX, 2025
9. [History (International Aero Engines)](https://links.prattwhitney.com/i-a-e/history.html) International Aero Engines

## Other sections

- [Summary](https://www.materialinsights.org/products/p_aircraft_engine/index.md)
- [Working](https://www.materialinsights.org/products/p_aircraft_engine/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_aircraft_engine/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_aircraft_engine/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_aircraft_engine/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_aircraft_engine/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_aircraft_engine/prod-interventions/index.md)
