# Aluminium can

A thin aluminium can for drinks, made in two pieces.

Source page: https://www.materialinsights.org/products/p_aluminium_can/

Packaging · No. 97

- Electronic age
 Packaging · Product

A 330 ml aluminium can weighs about 12 g, down from more than 80 g for the first drinks can, and about three-quarters of cans worldwide are recycled.

Chart: Illustration: Aluminium can

##### Where it comes from

Chart: Map of where it comes from

Coors brought out its two-piece aluminium can, in a 7-ounce Coors Banquet, on 22 January 1959, with a Cash for Cans recycling scheme. Hawaii Brewing had introduced an 11-ounce all-aluminium can for Primo beer in 1958, but recalled it when the lining failed. The stay-on tab arrived in 1975 and was patented in 1976.

##### Three things to know

1. Scaled to a 12 g, 330 ml can, North American data give about 0.16 kg CO2e to the factory gate for a can of new metal only and about 0.03 kg for one of recycled metal only, against about 0.07 kg for the average can (calculated).
2. Recycling rates differ widely: about 43% in the United States, 76.3% across Europe and about 75% worldwide in 2023, with Brazil near 98% over 15 years.
3. The lid is a different alloy from the body, with 4.5% magnesium against about 1%, and European ends carried only 3% scrap against 55% recycled content in bodies (2018 data).

##### The journey

1. 1 **Bauxite**About 4 t of ore for 1 t of aluminium
2. 2 **Alumina and aluminium**Bayer refining, then electrolysis at about 14.1 MWh per tonne
3. 3 **Sheet**Scrap and ingot melted, hot and cold rolled to about 0.3 mm in alloys 3004 (body) and 5182 (lid)
4. 4 **Can**Cupped, drawn and ironed to a 0.11 mm wall, coated, necked and filled
5. 5 **Recycling**Remelted with about 5% of the energy of new metal

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_aluminium_can) Switch on levers and see what changes in India by 2036.
 Covered in [Supply, demand and the cost curveCommodities](https://www.materialinsights.org/learn/commodities/supply-demand-costs/)[Cost, trade-offs and resources: why the best design is rarely the strongestEngineering](https://www.materialinsights.org/learn/engineering/cost-tradeoffs-resources/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_aluminium_can/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_aluminium_can/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_aluminium_can/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_aluminium_can/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_aluminium_can/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_aluminium_can/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_aluminium_can/prod-interventions/index.md)
