# Aluminium can: Bill of materials

Source page: https://www.materialinsights.org/products/p_aluminium_can/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

The composition is for a 330 ml can of 12 g, the European average in 2018 data ^[12], with the make-up of the average North American can in the 2021 Aluminum Association study: 12.99 g of metal, 0.457 g of coatings and 0.0144 g of ink, 13.46 g in all ^[6], scaled by mass (calculated). Manganese and magnesium are worked out from typical alloy contents ^[22] and Ball's body and end weights ^[1] (calculated). Variants differ only in recycled share. Can sheet is a component not yet a node and is listed as a new product.

as of 2026-11-16

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant 1 **Primary can**

| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 0.011 kgrange 0.011 to 0.012 kg | **94.01%** | 0% |
| Calculated: a 12 g, 330 ml can ^[12] holds 11.58 g of metal at the North American study's 12.99 of 13.46 g ^[6], less the manganese and magnesium below; here made wholly from new aluminium. Bauxite and alumina behind it are not nodes in the catalogue: 4 t of dried bauxite give 2 t of alumina and 1 t of aluminium ^[21]. Low and high are the same shares of an 11.9 g can (Ball, calculated) ^[1] and a 13 g can ^[24]. |  |  |  |  |

 Variant 2 **Average can**

| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 0.011 kgrange 0.011 to 0.012 kg | **94.01%** | 73% |
| Calculated: a 12 g, 330 ml can ^[12] holds 11.58 g of metal at the North American study's 12.99 of 13.46 g ^[6], less the manganese and magnesium below; 73% recycled metal, with primary aluminium 26.6% of raw metal input ^[6]. Bauxite and alumina behind it are not nodes in the catalogue: 4 t of dried bauxite give 2 t of alumina and 1 t of aluminium ^[21]. Low and high are the same shares of an 11.9 g can (Ball, calculated) ^[1] and a 13 g can ^[24]. |  |  |  |  |

 Variant 3 **Recycled can**

| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 0.011 kgrange 0.011 to 0.012 kg | **94.01%** | 100% |
| Calculated: the same mass made wholly from recycled metal, a limiting case. Bauxite and alumina behind it are not nodes in the catalogue: 4 t of dried bauxite give 2 t of alumina and 1 t of aluminium ^[21]. Low and high are the same shares of an 11.9 g can (Ball, calculated) ^[1] and a 13 g can ^[24]. |  |  |  |  |

 Variant 4 **Not stated**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Pnt Paints and coatings](https://www.materialinsights.org/chemicals/paints_coatings/) | Functional | 0 kg | **3.39%** |
| Calculated: coatings of 0.457 kg per 1,000 North American cans of 13.46 kg ^[6], scaled to a 12 g can; inks add about 0.013 g (0.0144 kg per 1,000 cans ^[6], 0.11% of mass). The inside lacquer is now often BPA-NI, based on acrylic emulsion and polyester resins; epoxy resins were the traditional lining ^[39]. |  |  |  |
| [Mg Magnesium](https://www.materialinsights.org/commodities/magnesium/) | Functional | 0 kg | **1.66%** |
| Calculated: about 1% in the 3004 body and 4.5% in the 5182 end ^[22], same split. It is the main strengthening element of the lid. |  |  |  |
| [Mn Manganese](https://www.materialinsights.org/commodities/manganese/) | Functional | 0 kg | **0.83%** |
| Calculated: about 1% in the 3004 body and 0.3% in the 5182 end ^[22], with the body 79.4% and the end 20.6% of the metal, from Ball's 9.43 g body and 2.44 g end ^[1], applied to 11.58 g of metal. Sits inside the alloy, so it is not added to the aluminium row. |  |  |  |

as of 2026-11-16

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Mine and refine | Bauxite is refined to alumina by the Bayer process; about 4 t of dried bauxite give 2 t of alumina, which gives 1 t of aluminium ^[21] | Bayer alumina process | ^[21] |
| Smelt new aluminium | Electrolysis of alumina uses about 14.1 MWh of electricity per tonne of aluminium on the global average ^[28] | Hall-Heroult aluminium smelting | ^[28] |
| Melt and cast | Scrap and ingot are melted together and cast; the can body and the lid use different alloys ^[6] | – | ^[6] |
| Roll the sheet | Ingots are preheated to about 1,000 degrees Fahrenheit (about 540 degrees Celsius) and hot rolled; coils may be annealed, then cold rolled to about 0.3 mm; lid stock is cleaned and coated ^[6] | – | ^[6] |
| Cup, draw and iron | Discs are stamped into cups about 88 mm across, redrawn, then ironed past rings that thin the wall; the base is domed ^[33]^[23] | – | ^[33]^[23] |
| Wash, coat and decorate | Trimmed cans are washed and dried, painted outside and coated inside as a barrier between metal and drink ^[6] | – | ^[6] |
| Neck and flange | The open end is narrowed to match the lid diameter ^[6] | – | ^[6] |
| Fill and seam the lid | The bottler fills the can and seams on the end, which is made in a separate line from lacquered coil ^[23] | – | ^[23] |

as of 2026-11-16

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [Bay Bayer alumina process](https://www.materialinsights.org/technologies/bayer_process/) Refining bauxite to alumina Every can's primary share starts here; recycled metal skips this step.
- [Al Hall-Heroult aluminium smelting](https://www.materialinsights.org/technologies/hall_heroult_process/) Smelting new aluminium · 26.6% share Primary aluminium was 26.6% of raw metal input to the average North American can ^[6].

as of 2026-11-16

#### Sources

1. [Beverage packaging – A Comparative Life Cycle Assessment](https://www.ball.com/getattachment/85d9e3af-e3aa-4b93-a687-5b34888b2bfc/Ball-Comparative-2020-LCA-full-report-FINAL.pdf) Sphera for Ball Corporation, 2020
2. [Life Cycle Assessment of North American Aluminum Cans](https://sphera.com/wp-content/uploads/2024/06/2021-Alumium-Can-Full-LCA-Report.pdf) Sphera for The Aluminum Association, 2021
3. [Life Cycle Assessment of Metal Packaging in Europe: executive summary](https://www.metalpackagingeurope.org/sites/default/files/2022-07/Metal%20Packaging%20Europe_LCA_Executive%20Summary_2022.pdf) Metal Packaging Europe, 2022
4. [Mineral Commodity Summaries 2026: Bauxite and Alumina](https://pubs.usgs.gov/periodicals/mcs2026/mcs2026-bauxite-alumina.pdf) USGS, 2026
5. [Sheet aluminum alloys for cans and cars](https://www.thefabricator.com/thefabricator/article/metalsmaterials/sheet-aluminum-alloys-for-cans-and-cars) The Fabricator
6. [An aluminium beverage can](https://aluminium-guide.com/aluminium-beverage-can/) Aluminium Guide, 2020
7. [Lightweight (Alustory: packaging)](https://alustory.international-aluminium.org/packaging/lightweight/) International Aluminium Institute (Alustory)
8. [Factsheet: Aluminium smelting with use of low-carbon electricity](https://giz.de/en/downloads/giz2025-en-factsheet-aluminium-smelting-with-use-of-low-carbon-electricity.pdf) GIZ, 2025
9. [The Comeback of the Aluminum Can, Part 2](https://www.asme.org/topics-resources/content/comeback-aluminum-can-part-2) ASME, 2018
10. [Toyochem launches new BPA-NI internal coatings for metal cans](https://www.coatingsworld.com/contents/view_breaking-news/2021-03-16/toyochem-launches-bpa-ni-internal-coatings-for-metal-cans) Coatings World

## Other sections

- [Summary](https://www.materialinsights.org/products/p_aluminium_can/index.md)
- [Working](https://www.materialinsights.org/products/p_aluminium_can/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_aluminium_can/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_aluminium_can/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_aluminium_can/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_aluminium_can/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_aluminium_can/prod-interventions/index.md)
