# Carbon fibre and composite parts

Light, strong parts made of carbon fibre set in resin.

Source page: https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/

Parts and semi-finished goods · No. 84

- Electronic age
 Parts and semi-finished goods · Product

Wind blades, not aircraft, took 44.5% of the world's carbon fibre in 2025, but aerospace and defence earned 44.1% of the revenue.

Chart: Illustration: Carbon fibre and composite parts

##### Where it comes from

Chart: Map of where it comes from

Akio Shindo filed his patent for PAN carbon fibre on 7 September 1959 at a government institute in Osaka. Toray began commercial production in 1971 and launched carbon fibre golf shafts in 1973.

##### Three things to know

1. ATA's report puts 2025 world carbon fibre demand at 224,510 tonnes, up 43.8%; Composites United, estimating from production capacity and its use, puts it at about 148,500 tonnes.
2. A review of published studies finds a median of 31 kg CO2e and 562 MJ of energy to make 1 kg of carbon fibre, with wide ranges.
3. In a typical offshore wind blade, carbon fibre in the spar cap is about 12% of the mass but about 50% of the lifetime carbon footprint.

##### The journey

1. 1 **Precursor**Polyacrylonitrile (PAN) is made, spun and stretched into fibre
2. 2 **Stabilise**The fibre is heated in air
3. 3 **Carbonise**It is baked without oxygen until mostly carbon is left
4. 4 **Treat and size**The surface is treated and coated so that resin sticks
5. 5 **Lay up and cure**Fibre is set in resin as prepreg, wound fibre or pultruded plate, then cured
6. 6 **End of life**Much composite waste is landfilled or burned; recovery is small
 Covered in [Structures and materials: stress, stiffness, strength and why things breakEngineering](https://www.materialinsights.org/learn/engineering/structures-and-materials/)[Cost, trade-offs and resources: why the best design is rarely the strongestEngineering](https://www.materialinsights.org/learn/engineering/cost-tradeoffs-resources/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-interventions/index.md)
