# Carbon fibre and composite parts: Bill of materials

Source page: https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

A finished part is carbon fibre held in a resin, usually epoxy. No opened source gives the fibre and resin shares of a typical part across uses, and the make-up of particular fibre grades is left out under the dual-use rule, so no material amounts are given. Most commercial fibre is made from PAN, which comes from acrylonitrile ^[3]. Carbon fibre itself, prepreg and fabric are not yet nodes.

as of 2026-11-13

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the precursor | PAN is polymerised, spun, stretched and finished into fibre | – | ^[3] |
| Stabilise | The PAN fibre is heated in air so that it will not melt later | Carbon fibre composites | ^[3] |
| Carbonise | The fibre is baked without oxygen to drive off the elements other than carbon | Carbon fibre composites | ^[3] |
| Treat and size | Surface treatment and a thin coating (sizing) help the resin bond | – | ^[3] |
| Make prepreg, fabric or plate | Fibre is woven, wound or made into prepreg; for wind spar caps it is pultruded into plate | – | ^[10] |
| Mould and cure | The part is formed and cured, for example by autoclave moulding | Carbon fibre composites | ^[5] |

as of 2026-11-13

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [CFR Carbon fibre composites](https://www.materialinsights.org/technologies/carbon_fibre_composites/) Fibre making and composite layup The twin technology page covers the fibre process and the laying-up of parts.

as of 2026-11-13

#### Sources

1. [A critical review and meta-analysis of energy demand, carbon footprint, and other environmental impacts from carbon fiber manufacturing](https://hpliddell.github.io/assets/pdf/carbonfiber2025.pdf) Resources, Conservation & Recycling, vol. 219, 108302 (Chen, Liddell, Ogale, Miao, Ijeoma, Carbajales-Dale), 2025
2. [Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres](https://nottingham-repository.worktribe.com/OutputFile/880172) University of Nottingham repository, accepted manuscript; published in Composites Part A, vol. 100, pp. 206 to 214 (Meng, McKechnie, Turner, Pickering), 2017
3. [Wind blade spar caps: Pultruded to perfection?](https://www.compositesworld.com/products/wind-blade-spar-caps-pultruded-to-perfection) CompositesWorld (Michael LeGault), 2018

## Other sections

- [Summary](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/index.md)
- [Working](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_carbon_fibre_and_composite_parts/prod-interventions/index.md)
