# Cardiac pacemaker: Bill of materials

Source page: https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

No bill of materials by mass was found. The materials come from makers' documents: one BIOTRONIK Evia manual of 2009 (titanium housing, epoxy header, battery systems) ^[1], one Boston Scientific lead spec sheet (INGEVITY+) ^[10] and Medtronic's Micra page ^[2], so the lead materials describe one lead model only. Leads, the battery cell and the electronic circuit are not yet nodes; they are listed in new_products.

as of 2026-11-13

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant **Transvenous**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Ti Titanium](https://www.materialinsights.org/commodities/titanium/) | Structural | Not given | – |
| The housing of the BIOTRONIK Evia is titanium ^[1], and Empa says pacemakers are usually housed in a titanium housing welded from two parts ^[9]. No source gives the mass. |  |  |  |
| [EPX Epoxy resins](https://www.materialinsights.org/chemicals/epoxy/) | Structural | Not given | – |
| The Evia header, where the leads plug in, is epoxy resin ^[1]. No source gives the mass. |  |  |  |
| [Li Lithium](https://www.materialinsights.org/commodities/lithium/) | Functional | Not given | – |
| The Evia manual's battery data table lists lithium iodine (LiJ), silver vanadium oxide with carbon monofluoride, and lithium manganese dioxide cells ^[1]; a 2014 review says lithium iodine cells are still commonly used ^[3]. No source gives the lithium mass. |  |  |  |
| [I Iodine](https://www.materialinsights.org/commodities/iodine/) | Functional | Not given | – |
| Iodine is in the lithium iodine (LiJ) cell, one of the battery systems in the Evia manual's battery data table ^[1]. No source gives the mass. |  |  |  |
| [PU Polyurethanes (MDI, TDI, polyols)](https://www.materialinsights.org/chemicals/polyurethanes/) | Structural | Not given | – |
| From one lead model only: the external insulation of the Boston Scientific INGEVITY+ lead is polyurethane (spec sheet table) ^[10]. Other leads may differ. No source gives the mass. |  |  |  |
| [Sil Silicones](https://www.materialinsights.org/chemicals/silicones/) | Structural | Not given | – |
| From one lead model only: the internal insulation of the INGEVITY+ lead is silicone rubber (spec sheet table) ^[10]. No source gives the mass. |  |  |  |
| [Pt Platinum](https://www.materialinsights.org/commodities/platinum/) | Functional | Not given | – |
| From one lead model only: the tip electrode of the INGEVITY+ lead is iridium oxide coated platinum-iridium (spec sheet table) ^[10]. No source gives the mass. |  |  |  |

Indicative · as of 2026-11-13. No amount per device was found: the sources name the materials of one generator family (BIOTRONIK Evia) and one lead model (INGEVITY+) but give no masses, so each link is kept without an amount.

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Battery cell | The sealed cell comes from a specialist cell maker; the Evia manual names Greatbatch, Inc. and Litronik GmbH (Pirna, Germany) ^[1] | – | ^[1] |
| Case | Two titanium parts are welded together to close the case; Empa describes laser welding at Medtronic ^[9] | Laser | ^[9] |
| Header | An epoxy resin header holds the sockets where the leads plug in ^[1] | – | ^[1] |
| Leads | In one lead model, alloy coil conductors sit inside polyurethane and silicone insulation with a coated platinum-iridium tip ^[10] | – | ^[10] |

as of 2026-11-13

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [Lsr Laser](https://www.materialinsights.org/technologies/laser/) Welding the two titanium parts of the case Empa describes laser welding of the case at Medtronic's plant in Switzerland and says the lasers are used at Medtronic factories in Puerto Rico, Singapore and the US; it gives no share of output ^[9].

as of 2026-11-13

#### Technologies inside it

The technologies inside the product, with how much of each per unit
 Embodies

- [Pcm Implantable pacemaker](https://www.materialinsights.org/technologies/implantable_pacemaker/) The pacing technology is the twin node; one pacemaker holds one pulse generator.

as of 2026-11-13

#### Sources

1. [BIOTRONIK EVIA User And Technical Manual](https://manualmachine.com/biotronik/evia/19603451-user-and-technical-manual) BIOTRONIK (copy hosted on manualmachine.com), 2009, Doc. Id. 365353-A, cover dated 23.04.2009; mechanical characteristics, battery data and service time tables; explantation and disposal section
2. [Micra AV and Micra VR leadless pacemakers for bradyarrhythmia management](https://europe.medtronic.com/in-en/healthcare-professionals/products/cardiac-rhythm/pacemakers/micra-pacing-system.html) Medtronic (India site), 2024, specification table; page footer says last updated March 2024
3. [A Look Back: 85 Years of Cardiac Pacing](https://www.hmpgloballearningnetwork.com/site/eplab/articles/Look-Back-85-Years-Cardiac-Pacing) EP Lab Digest (HMP Global Learning Network), B. J. Wilhelm and B. Osswald, 2014, September 2014
4. [Processing titanium for pacemakers](https://empa.ch/web/s604/pacemakers) Empa (Rémy Nideröst), 2018, article dated 25 October 2018
5. [INGEVITY™+ Pacing Lead](https://www.bostonscientific.com/content/dam/bostonscientific/Rhythm%20Management/portfolio-group/Leads/INGEVITY/Ingevity-Spec-Sheet.pdf) Boston Scientific, 2026, spec sheet CRM-2625410-AA, materials and dimensions table

## Other sections

- [Summary](https://www.materialinsights.org/products/p_cardiac_pacemaker/index.md)
- [Working](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_cardiac_pacemaker/prod-interventions/index.md)
