# Ceiling fan: Bill of materials

Source page: https://www.materialinsights.org/products/p_ceiling_fan/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

The direct materials are for a good quality 1,200 mm induction fan listed by NRCD (2005) and quoted by Prayas: 1.1 kg of silicon steel stampings, 0.3 kg of copper wire and 2.2 kg of end-shield castings, plus a shaft, two bearings, a rotor casting, two canopies, a capacitor and three blades ^[5]. Complete fans weigh 4.53 kg (Havells induction) and 5 kg (Atomberg BLDC) ^[7]^[10]. The fan motor is counted here, not linked, because the motor node describes much larger motors. Capacitors, regulators and controller boards are not yet product nodes.

as of 2026-11-17

#### Components

The products inside one unit, with quantity, mass share and cost share
 Variant **BLDC**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Permanent magnet](https://www.materialinsights.org/products/p_permanent_magnet/) | Component | Not given | – |
| A BLDC rotor carries permanent magnets; ferrite magnets are available in India, while Usha's chief executive said in 2023 that the magnets were imported ^[16]^[17]. |  |  |  |

as of 2026-11-17

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant 1 **Induction**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 2.2 kg | – |
| End-shield castings (the motor covers) of the same fan ^[5]. Prayas does not name the alloy; Indian makers die cast motor covers and rotor cages in aluminium ^[22], so the amount is indicative. Rotor and blade mass is not given. |  |  |  |
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Functional | 1.1 kg | – |
| Silicon steel stampings (the motor laminations) of a good quality 1,200 mm induction fan, from an NRCD (2005) list quoted by Prayas ^[5]. Steel in the shaft, downrod and canopies is not given ^[5]^[22]. |  |  |  |
| [Cu Copper](https://www.materialinsights.org/commodities/copper/) | Functional | 0.3 kg | – |
| Copper winding wire in the same 1,200 mm induction fan ^[5]. Some newer fans use aluminium or copper-clad aluminium windings instead ^[30]. |  |  |  |

 Variant 2 **BLDC**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [ABS ABS](https://www.materialinsights.org/chemicals/abs/) | Structural | Not given | – |
| The blades of the Havells Stealth Air BLDC fan are compounded ABS ^[8]; the Atomberg Renesa Alpha has aluminium blades ^[10]. No source gives the mass. |  |  |  |

 Variant 3 **Not stated**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Pnt Paints and coatings](https://www.materialinsights.org/chemicals/paints_coatings/) | Functional | Not given | – |
| Parts are pretreated and powder coated ^[22]; Havells lists a powder coated finish ^[7]. No source gives the mass. |  |  |  |

Indicative · as of 2026-11-17. Masses are for one good quality 1,200 mm induction fan in an NRCD (2005) list quoted by Prayas [5]; no source opened gives masses for a BLDC fan.

#### Cost breakdown

The share of the unit's cost in each component or stage

| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Copper winding wire (18 to 25% of a model plant's operating cost, not of one fan; midpoint, calculated) | 21.5% | – | 2026 | ^[22] |
| Aluminium ingot and sheet (15 to 22%; midpoint, calculated) | 18.5% | – | 2026 | ^[22] |
| Electronics and components such as capacitors, bearings and BLDC drivers (12 to 20%; midpoint, calculated) | 16% | – | 2026 | ^[22] |
| CRNO electrical steel for laminations (10 to 15%; midpoint, calculated) | 12.5% | – | 2026 | ^[22] |
| Powder, paint and packaging (5 to 8%; midpoint, calculated) | 6.5% | – | 2026 | ^[22] |
| Materials of a good quality 1,200 mm fan (INR 445 of INR 525; calculated) | 84.8% | Induction | – | ^[5] |
| Labour including painting (INR 45 of INR 525; calculated) | 8.6% | Induction | – | ^[5] |
| Packing (INR 35 of INR 525; calculated) | 6.7% | Induction | – | ^[5] |

as of 2026-11-17

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Source |
|---|---|---|
| Stamp and stack laminations | Electrical steel is stamped into laminations, which are stacked and riveted into cores. | ^[22] |
| Die cast | Aluminium rotor cages and motor covers are cast. | ^[22] |
| Machine | Covers and shafts are machined for bearing fits. | ^[22] |
| Wind and varnish | Copper coils are wound, inserted and impregnated. | ^[22] |
| Form blades and parts | Blades, downrods and canopies are formed. | ^[22] |
| Finish | Parts are pretreated and powder coated. | ^[22] |
| Assemble motor and fan | Stator, rotor, bearings and a capacitor or driver are fitted. | ^[22] |
| Test and pack | Air delivery, power, safety and balance are checked, then fans are cartoned and shipped. | ^[22] |

as of 2026-11-17

#### Technologies inside it

The technologies inside the product, with how much of each per unit
 Embodies

- [Mot Electric motors and drives](https://www.materialinsights.org/technologies/e_motors/) 1 motor per fan Each fan embodies one small electric motor, induction or BLDC.
- [PE Transformers and power electronics](https://www.materialinsights.org/technologies/e_power_electronics/) A BLDC fan carries a controller board that switches the coil current; the controller is the main extra cost of a BLDC motor over an induction motor ^[6].

as of 2026-11-17

#### Sources

1. [Ceiling Fan: The Overlooked Appliance in Energy Efficiency Discussions (Singh, Barve, Sant)](https://energy.prayaspune.org/images/pdf/ceiling_fans_the_overlooked_appliance_107a01.pdf) Prayas Energy Group, Pune, Annexure, Table A-1
2. [Efficiency improvement opportunities for ceiling fans (Shah, Sathaye, Phadke, Letschert), vol. 8, pp. 37 to 50](https://rd.springer.com/content/pdf/10.1007/s12053-014-9274-6.pdf) Energy Efficiency, Springer, 2015
3. [Xpress HS Regular Ceiling Fan](https://havells.com/xpress-hs-regular-ceiling-fan.html) Havells India
4. [Stealth Air BLDC+ Ceiling Fan](https://havells.com/stealth-air-bldc-ceiling-fan.html) Havells India
5. [Atomberg Renesa Alpha 120cm Sweep 3 Blade Ceiling Fan, 5 Star BEE Rated](https://www.croma.com/atomberg-renesa-alpha-120cm-sweep-3-blade-ceiling-fan-5-star-bee-rated-with-regulator-ivory-/p/265738) Croma
6. [Experts Discuss Advancing Affordable, Energy-Efficient, and Locally Produced Ceiling Fans in India](https://www.nrdc.org/bio/prima-madan/experts-discuss-advancing-affordable-energy-efficient-and-locally-produced-ceiling) Natural Resources Defense Council (NRDC)
7. [Ceiling fans get costlier by 8 to 20 per cent as BEE's revised norms mandate star labelling](https://www.tribuneindia.com/news/business/ceiling-fans-get-costlier-by-8-to-20-per-cent-as-bees-revised-norms-mandate-star-labelling-468576) The Tribune (PTI), 2023
8. [Ceiling fan plant setup cost in India: manufacturing process flow, machinery, DPR and financial model 2026](https://www.imarcgroup.com/insight/ceiling-fan-manufacturing-plant-setup-cost-india) IMARC Group, 2026
9. [Why Your Parents' Fan Still Works? And Yours Won't! (newsletter, March 2025)](https://copperindia.org/wp-content/uploads/2025/06/March-2025-Newsletter-Why-Your-Parents-Fan-Still-Works-And-Yours-Wont.pdf) International Copper Association India (ICA India), 2025

## Other sections

- [Summary](https://www.materialinsights.org/products/p_ceiling_fan/index.md)
- [Working](https://www.materialinsights.org/products/p_ceiling_fan/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_ceiling_fan/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_ceiling_fan/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_ceiling_fan/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_ceiling_fan/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_ceiling_fan/prod-interventions/index.md)
