# Electrolyser: Interventions

Source page: https://www.materialinsights.org/products/p_electrolyser/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Design | Components design | Cut iridium and platinum per kW in PEM stacks | From 0.8 g per kW today to 0.03 g per kW at the DOE ultimate target, a 96% cut (calculated) | Research target; 2022 status is 0.8 g per kW | Not yet at target | Stack makers, catalyst suppliers, research programmes | ^[5] |
| Change route | Components design | Choose alkaline cells, which use nickel and need no iridium, where steady power suits them | Removes the 0.75 kg of iridium per MW of PEM; adds about 2,170 kg of nickel per MW (calculated) | Deployed; alkaline is 44% of operational European manufacturing capacity | Alkaline is the cheapest per kW in IRENA's 2020 ranges | Project developers and makers | ^[6]^[8]^[13] |
| Circularity | End of life | Recycle stack and plant materials back into new electrolysers | About 50% lower climate impact of the plant from recycled against primary materials; 77% of the system mass can be recycled or reused | Studied for Germany; a recycling industry is not yet in place | Not found | Makers, recyclers, regulators | ^[8] |
| Efficiency | Use | Lower the electricity used per kg of hydrogen | From 55 to 46 kWh per kg for a PEM system at the ultimate DOE target, a 16% cut (calculated) | Research target | 2022 status 55 kWh per kg | Stack and rectifier makers | ^[5] |
| Design | Making | Make stacks last longer, so fewer replacement stacks are built | Stack life from 40,000 to 80,000 hours at the DOE target would halve stack builds per operating hour (calculated) | Research target | 40,000 hours in the 2022 status; stacks replaced after about 10 years in a 100 MW project | Stack makers | ^[5]^[12] |

as of 2026-11-13

#### Sources

1. [Technical Targets for Proton Exchange Membrane Electrolysis](https://www.energy.gov/eere/fuelcells/technical-targets-proton-exchange-membrane-electrolysis) US Department of Energy, Hydrogen and Fuel Cell Technologies Office, 2023
2. [Green Hydrogen Cost Reduction: Scaling up Electrolysers to Meet the 1.5°C Climate Goal](https://fgvenergia.fgv.br/sites/fgvenergia.fgv.br/files/irena_green_hydrogen_cost_2020.pdf) International Renewable Energy Agency, 2020, Table ES1 and Table 1; copy hosted by FGV Energia
3. [Reducing Environmental Impacts of Water Electrolysis Systems by Reuse and Recycling: Life Cycle Assessment of a 5 MW Alkaline Water Electrolysis Plant](https://mdpi.com/1996-1073/18/4/796) Energies 18(4), 796, MDPI (Annika C. Hoppe and Christine Minke), 2025, Table 2
4. [Deliverable 9.4, GHG emissions avoidance analysis report (pre-construction)](https://2.refhyne.eu/wp-content/uploads/2025/11/REFHYNE-2-D9.4-pre-construction-GHG-avoidance-report-final2.pdf) TECNALIA for the REFHYNE 2 project, 2025, Sections 5.1 to 5.3; dated March 2025
5. [Electrolyser manufacturing: Where does Europe stand?](https://hydrogeneurope.eu/wp-content/uploads/2025/09/Electrolyser_2025_DIGITAL_1page.pdf) Hydrogen Europe, 2025

## Other sections

- [Summary](https://www.materialinsights.org/products/p_electrolyser/index.md)
- [Working](https://www.materialinsights.org/products/p_electrolyser/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_electrolyser/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_electrolyser/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_electrolyser/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_electrolyser/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_electrolyser/prod-evolution/index.md)
