# EV charger: Footprint

Source page: https://www.materialinsights.org/products/p_ev_charger/prod-footprint/

#### Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

| Variant | Material | Amount (kg) | Emission factor (kg CO2e per kg) | Emissions (kg CO2e) |
|---|---|---|---|---|
| FAST | Steel | 214.02 | 1.92 | 410.9 |
| FAST | Copper | 73.87 | 3.965 | 292.9 |
| FAST | Aluminium | 12.91 | 14.8 | 191.1 |
| FAST | ABS | 0.59 | – | – |
| FAST | Polystyrene and EPS | 0.28 | – | – |
| Ultra | Steel | 403.67 | 1.92 | 775 |
| Ultra | Aluminium | 45.77 | 14.8 | 677.4 |
| Ultra | Copper | 4.44 | 3.965 | 17.6 |

Worked out from data

#### The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| FAST | Making | World | 961 | 100% |
| FAST | Use | World | 2648 | 100% |
| FAST | Making | India | 992 | 100% |
| FAST | Use | India | 3874 | 100% |
| Ultra | Making | World | 1537 | 100% |
| Ultra | Use | World | – | – |
| Ultra | Making | India | 1567 | 100% |
| Ultra | Use | India | – | – |

Worked out from data

#### Energy to make it

Energy used to make one unit, by carrier and stage
 Energy to make

- [El Electricity](https://www.materialinsights.org/energy/electricity/) 145.3 kWh · Manufacturing Electricity for making the 120 kW C6EU, about 523 MJ (calculated) ^[2]. The EPD prices it at 1.13 kg CO2e per kWh on the State Grid of China, which gives about 164 kg CO2e (calculated), the declared manufacturing core value. Materials-stage energy is not split out.

as of 2026-11-17

#### Energy in use

Energy one unit uses per year of use, by carrier
 Energy in use

- [El Electricity](https://www.materialinsights.org/energy/electricity/) 289.08 kWh per year · lifetime 20 years Fast Standby consumption only, for the 120 kW C6EU: 33 W all year, or 289.08 kWh ^[2]. Left out: the electricity passed to cars, and the losses in converting and carrying it, which at the maker's claimed peak efficiency of 96% or more would be at least about 4% of each kWh drawn ^[4]. The C7 draws 97 W by day and 150 W at night ^[3].

as of 2026-11-17

#### Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

| Stage | Value | Unit | Share | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|---|
| Making | 7585 | kg CO2e per 120 kW charger, calculated as 7,420 + 165 | 69.1 | Fast | China (made), mainly Europe (sold) | 2022 | ^[2] |
| Logistics | 377.2 | kg CO2e per 120 kW charger, calculated as distribution 365 + installation 12.2 | 3.4 | Fast | China (made), mainly Europe (sold) | 2022 | ^[2] |
| Use | 2890 | kg CO2e per 120 kW charger over 20 years, standby electricity only, no charging losses | 26.3 | Fast | China (made), mainly Europe (sold) | 2022 | ^[2] |
| End of life | 119 | kg CO2e per 120 kW charger | 1.1 | Fast | China (made), mainly Europe (sold) | 2022 | ^[2] |
| Making | 22,226 | kg CO2e per C7 charger, calculated as 22,000 + 226 | 70.5 | Ultra-fast | China (made), mainly Europe (sold) | 2022 | ^[3] |
| Logistics | 385.87 | kg CO2e per C7 charger, calculated as distribution 376 + installation 9.87 | 1.2 | Ultra-fast | China (made), mainly Europe (sold) | 2022 | ^[3] |
| Use | 8700 | kg CO2e per C7 charger over 20 years, standby electricity only, no charging losses | 27.6 | Ultra-fast | China (made), mainly Europe (sold) | 2022 | ^[3] |
| End of life | 203 | kg CO2e per C7 charger | 0.6 | Ultra-fast | China (made), mainly Europe (sold) | 2022 | ^[3] |
| Making | 13,039 | kg CO2e per charger (Alpitronic Hypercharger 300), as stated; boundary not stated | – | – | Europe | 2024 | ^[15] |

as of 2026-11-17. The two EPDs are for one declared unit over a 20-year life, not for a 60 kW charger; both chargers are made in China and sold mainly in Europe, and neither EPD names the grid used for the use stage. The use stage counts standby electricity only (33 W in the C6EU; 97 W by day and 150 W at night in the C7): the electricity delivered to cars and the charging losses are outside it. Stages follow the EPDs' columns: manufacturing upstream and core, distribution, installation, use and maintenance, end of life. Both tables print six values under five stage headings, with Upstream, Core and Downstream as sub-headings; reading them as manufacturing upstream, core, then the four downstream stages is confirmed by the arithmetic, since 145.30 kWh at 1.13 kg CO2e per kWh is about 164 kg, the second value (165). Shares are calculated from the stage values. The Fastned figure is for the charger alone; the document does not state its power or boundary.

#### Recovered as

The commodities and chemicals recovered at end of life, with recovery rates
 Recovered as

- [Cu Copper](https://www.materialinsights.org/commodities/copper/) Recycling DC fast chargers contain valuable metals, and the article urges recovery of copper, aluminium and rare earths; no recovery rate found ^[17].
- [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) Recycling Aluminium is 12.91 kg of the C6EU ^[2]; no recovery rate for chargers found.
- [St Steel](https://www.materialinsights.org/commodities/steel/) Recycling Steel is about 56% of the C6EU's mass (calculated) ^[2]; no recovery rate for chargers found.

as of 2026-11-17

#### End of life in India

Collection and recycling in India, including the informal sector

A 2025 article says India has no specific rules for recycling EV charging infrastructure and urges that producer responsibility be extended to it ^[17]. The E-Waste Rules 2022 apply from 1 April 2023, with a 60% recycling target for listed equipment in 2023-24 rising to 80% by 2027-28, but no source opened says chargers are on the list ^[19]. No source gives a recycling rate for chargers or the informal sector's share.

as of 2026-11-17

#### Sources

1. [Environmental Product Declaration: C6EU Charging Station (MR-EPDITALY0066, Beijing XCHARGE Technology Co.)](https://www.epditaly.it/wp-content/uploads/2016/12/EPDItaly-Beijing-XCHARGE-Technology-Co.pdf) EPDItaly, 2023
2. [Environmental Product Declaration: Smart DC Charger C7 (MR-EPDITALY0079, Beijing XCHARGE Technology Co.)](https://epditaly.it/wp-content/uploads/2024/01/MR-EPDITALY0079.pdf) EPDItaly, 2023
3. [Technical guide to 60kW DC fast chargers: engineering, grid integration, and TCO](https://www.midapower.com/news/technical-guide-to-60kw-dc-fast-chargers-engineering-grid-integration-and-tco/) Mida Power (charger maker), 2026
4. [Chain analysis: Fastned charging stations](https://www.fastnedcharging.com/media/bdziienr/chain-analysis-charging-stations.pdf) Fastned and DCC (Eckhous and de Jong), 2024
5. [Closing the loop: EV charging infrastructure circularity in India](https://humansofev.info/?p=11460) Humans of EV (Pranay Theerdhala), 2025
6. [E-Waste Management Rules, 2022](https://www.iea.org/policies/25027-e-waste-management-rules-2022) International Energy Agency policies database, 2022

## Other sections

- [Summary](https://www.materialinsights.org/products/p_ev_charger/index.md)
- [Working](https://www.materialinsights.org/products/p_ev_charger/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_ev_charger/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_ev_charger/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_ev_charger/prod-supply/index.md)
- [Evolution](https://www.materialinsights.org/products/p_ev_charger/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_ev_charger/prod-interventions/index.md)
