# Flexible plastic packaging film: Bill of materials

Source page: https://www.materialinsights.org/products/p_flexible_packaging_film/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

The amounts are a mass balance, one tonne of polymer for one tonne of film, from the sizing of a US blown-film model ^[2]. Real films also carry additives and, in laminates, adhesives, inks and barrier layers such as EVOH or nylon ^[7]. No source gives their amounts per tonne. EVOH film, carrier bags and pouches are not yet nodes.

as of 2026-11-17

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant 1 **Polyethylene film**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [LLDPE Polyethylene (LDPE, LLDPE)](https://www.materialinsights.org/chemicals/polyethylene/) | Structural | 1000 kg | – |
| Calculated: a US blown-film model is sized for 1 tonne of film from 30% recycled flexible plastic and 70% LDPE, so about one tonne of polymer goes in per tonne of film ^[2]. Additive content not found. |  |  |  |
| [HDPE High-density polyethylene](https://www.materialinsights.org/chemicals/hdpe/) | Structural | Not given | – |
| HDPE is also blown into film; no amount per tonne was found. |  |  |  |
| [Add Polymer additives](https://www.materialinsights.org/chemicals/polymer_additives/) | Functional | Not given | – |
| Added to the pellets before extrusion; no amount per tonne found. |  |  |  |
| [PA Nylon (PA6, PA66)](https://www.materialinsights.org/chemicals/nylon/) | Functional | Not given | – |
| Polyamide 6 is one of the layer polymers compared in an LCA of 14 multilayer films ^[7]; amount per tonne not found. |  |  |  |
| [Adh Adhesives and sealants](https://www.materialinsights.org/chemicals/adhesives/) | Consumable | Not given | – |
| Laminating adhesive joins layers in multilayer films; amount per tonne not found. |  |  |  |

 Variant 2 **Polypropylene film**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [PP Polypropylene](https://www.materialinsights.org/chemicals/polypropylene/) | Structural | 1000 kg | – |
| Calculated on the same one-tonne-in, one-tonne-out basis as the polyethylene film ^[2]; additive content not found. |  |  |  |

as of 2026-11-17

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the polymer | Ethylene is polymerised at very high pressure to make low-density polyethylene ^[9]. | High-pressure polyethylene process | ^[9] |
| Make the other resins | Polypropylene and linear polyethylene are made with catalysts at lower pressure. | Ziegler-Natta polymerisation | – |
| Compound | Pellets are mixed with additives and any recycled polymer before extrusion. | – | – |
| Extrude the film | An extruder melts the pellets and forces the melt through an annular die; air inflates the tube ^[8]. | – | ^[8] |
| Cool and wind | Chilled air cools the bubble, which is flattened, pulled up by nip rollers and wound ^[8]. | – | ^[8] |
| Stretch (polypropylene) | BOPP film is stretched in both directions to orient the chains. | – | – |
| Convert | Rolls are printed, laminated, slit and sealed into bags and pouches. | – | – |

as of 2026-11-17

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [LDPE High-pressure polyethylene process](https://www.materialinsights.org/technologies/high_pressure_polyethylene/) Making low-density polyethylene resin The resin for much blown polyethylene film comes from this process; no share found.
- [ZN Ziegler-Natta polymerisation](https://www.materialinsights.org/technologies/ziegler_natta_catalysis/) Making polypropylene and linear polyethylene resin No share of film made from catalyst-made resin found.

as of 2026-11-17

#### Sources

1. [Economic and environmental feasibility of recycling flexible plastic packaging from single stream collection (INL/JOU-21-64510)](https://www.osti.gov/servlets/purl/1957499) Idaho National Laboratory for the US Department of Energy, 2023
2. [A cradle-to-grave life cycle assessment of multilayer plastic film food packaging materials, comparing to a paper-based alternative](https://researchconnect.buffalo.edu/en/publications/a-cradle-to-grave-life-cycle-assessment-of-multilayer-plastic-fil/) Waste Management 200, 114747 (Mousania and Atkinson), 2025
3. [What is blown film extrusion?](https://fkur.com/en/knowledgebase/blown-film-extrusion/) FKuR
4. [Polyethylene: discovered by accident 75 years ago](https://icis.com/resources/news/2008/05/12/9122447/polyethylene-discovered-by-accident-75-years-ago) ICIS (Anna Jagger), 2008

## Other sections

- [Summary](https://www.materialinsights.org/products/p_flexible_packaging_film/index.md)
- [Working](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-interventions/index.md)
