# Flexible plastic packaging film: Interventions

Source page: https://www.materialinsights.org/products/p_flexible_packaging_film/prod-interventions/

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_flexible_packaging_film) Switch on levers and see what changes in India by 2036.

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Circularity | End of life | Collect and recycle post-consumer film into new film | Blending 30% recycled flexible plastic into LDPE film cuts 2,338 kg CO2e per tonne to 1,801 kg, a 23% fall, in a US model ^[2] | modelled for a US single-stream collection; recycling of film is rare | 3 to 8% of US post-consumer film recycled in 2021 ^[6] | Municipalities, recyclers, brand owners and film makers | ^[2]^[6] |
| Circularity | Making | Use 30% recyclate in BOPP film | Total CO2 falls 20%, from 2.744 to 2.193 kg per kg of film ^[4] | assessed with data from a running plant | Not found | Film makers | ^[4] |
| Design | Components design | Use EVOH instead of polyamide 6 as the barrier layer | EVOH has 35% lower energy and 74% lower GHG impact than PA 6 ^[7] | assessed in a life-cycle study | Not found | Film designers and converters | ^[7] |
| Substitute | Components design | Switch to coated paper-based packaging with the same barrier | 34 to 62% lower GHGs than plastic multilayer films in a cradle-to-grave LCA ^[7] | assessed in a life-cycle study | Not found | Brand owners and packaging designers | ^[7] |
| Design | Components design | Design films to be readily recycled | At most 40% of US flexible packaging could readily be recycled mechanically; design for recycling raises that ceiling ^[6] | deployed in rules, in progress in industry | At most 40% of US flexible packaging readily recyclable ^[6] | Brand owners, film makers and regulators | ^[6] |
| Efficiency | Making | Use a small extruder built for sensitive polymers for the EVOH layer instead of a standard one | Cuts the specific energy input for EVOH from 250 to 200 Wh per kg at the same maximum throughput, 20% (calculated) ^[25] | deployed (maker's figure) | Not found | Film makers | ^[25] |
| Electrify | Making | Run the packaging process on wind power instead of the national mix | Potential damage to human health falls 91%, to ecosystems 89%, to resources 92% in a Polish study of shrink-packing bottles in LDPE film with 50% recyclate ^[27] | assessed in a life-cycle study | Not found | Film makers and power buyers | ^[27] |
| Business model | End of life | Extended producer responsibility with recycled-content targets | Sets 10% recycled content for flexible packaging in India for 2025 to 2027 and 20% after that ^[18] | deployed | In force in India ^[18] | Producers, importers and brand owners; regulators | ^[18] |

as of 2026-11-17

#### Sources

1. [Economic and environmental feasibility of recycling flexible plastic packaging from single stream collection (INL/JOU-21-64510)](https://www.osti.gov/servlets/purl/1957499) Idaho National Laboratory for the US Department of Energy, 2023
2. [The use of recyclates reduces the carbon footprint of films the most](https://spnews.com/bruckner-envistra) Sustainable Packaging News (study by Brückner Maschinenbau and envistra), 2023
3. [Addressing Favorable and Challenging Flexible Plastic Packaging Waste Flows: A Material Flow Analysis](https://dspace.mit.edu/handle/1721.1/163182) Journal of Advanced Manufacturing and Processing 7(3), e70014 (Makarova and others, MIT), 2025
4. [A cradle-to-grave life cycle assessment of multilayer plastic film food packaging materials, comparing to a paper-based alternative](https://researchconnect.buffalo.edu/en/publications/a-cradle-to-grave-life-cycle-assessment-of-multilayer-plastic-fil/) Waste Management 200, 114747 (Mousania and Atkinson), 2025
5. [India tightens plastic waste rules to boost recycling and reuse](https://www.packaginginsights.com/news/india-amends-plastic-waste-rules.html) Packaging Insights, 2026
6. [Energy-efficient extrusion: How can we lower energy costs?](https://www.sml.at/es/node/428) SML Maschinengesellschaft, 2023
7. [Analysis of the Impact of the Post-Consumer Film Waste Scenario and the Source of Electricity on the Harmfulness of the Mass Packaging Process](https://mdpi.com/2073-4360/16/24/3467) Polymers 16(24), 3467 (Walichnowska and others), 2024

## Other sections

- [Summary](https://www.materialinsights.org/products/p_flexible_packaging_film/index.md)
- [Working](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_flexible_packaging_film/prod-evolution/index.md)
