# Gas turbine: Bill of materials

Source page: https://www.materialinsights.org/products/p_gas_turbine/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

Composition is for one 16 MW aeroderivative unit of 5,150 kg, the GTU-16P made in Russia, in one 2024 life cycle study; the paper says it is built on the gas generator of an aircraft engine ^[2]^[3]. No bill of materials for a 400 to 570 MW heavy-duty frame turbine was found, so heavy-duty units are not covered. The foundation (concrete, copper, polyethylene, reinforcing steel) and the generator are outside the unit ^[2]. Ceramic coatings and rhenium have no amounts.

as of 2026-11-13

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant **Aeroderivative**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Structural | 2630 kg | **51.1%** |
| Structural alloy steel 2,150 kg plus stainless steel 480 kg in one GTU-16P unit (one study, one aeroderivative unit), summed (calculated); mass share calculated against the 5,150 kg dry mass; the preprint itself says steel is 51% ^[2]^[3] |  |  |  |
| [Ni Nickel](https://www.materialinsights.org/commodities/nickel/) | Functional | 1530 kg | **29.7%** |
| Nickel alloys (alloy mass, not pure nickel) in one GTU-16P unit; the preprint says about 30% by weight; mass share calculated against 5,150 kg ^[2]^[3] |  |  |  |
| [Ti Titanium](https://www.materialinsights.org/commodities/titanium/) | Structural | 750 kg | **14.6%** |
| Titanium alloys (alloy mass, not pure titanium) in one GTU-16P unit; mass share calculated against 5,150 kg ^[2]^[3] |  |  |  |
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 240 kg | **4.7%** |
| Aluminium alloys in one GTU-16P unit; mass share calculated against 5,150 kg (the five alloy masses sum to 5,150 kg) ^[2] |  |  |  |

as of 2026-11-13. One study, one unit: the 16 MW GTU-16P aeroderivative made in Russia [2][3]. No bill of materials for a heavy-duty frame turbine was found.

#### Technologies inside it

The technologies inside the product, with how much of each per unit
 Embodies

- [CCGT Gas turbines and combined cycle](https://www.materialinsights.org/technologies/e_gas_turbines/) 1 gas turbine cycle The product is the machine that carries out the gas turbine cycle described in the twin technology node.

as of 2026-11-13

#### Sources

1. [Life cycle assessment of a gas turbine installation in the Russian Federation (Global Energy 30(2), 74-87; in Russian)](https://engtech.spbstu.ru/userfiles/files/articles/2024/2/Mozzhegorova%2C-Ilinih%2C-Korotaev.pdf) Peter the Great St Petersburg Polytechnic University, 2024
2. [Life Cycle Assessment of a Gas Turbine Installation (preprint, version 1, 24 November 2023)](https://www.preprints.org/manuscript/202311.1582) Preprints.org, 2023

## Other sections

- [Summary](https://www.materialinsights.org/products/p_gas_turbine/index.md)
- [Working](https://www.materialinsights.org/products/p_gas_turbine/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_gas_turbine/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_gas_turbine/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_gas_turbine/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_gas_turbine/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_gas_turbine/prod-interventions/index.md)
