# Grain-oriented electrical steel: Working

Source page: https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-working/

#### What it is

The product and the job it does, in a short paragraph

Grain-oriented electrical steel is a thin silicon steel sheet, with silicon above 3%, in which most crystals point the same way along the rolling direction ^[1]. That alignment makes it easy to magnetise, so transformer cores built from it waste little energy as heat. This node covers cold-rolled grain-oriented sheet and strip (CRGO, HS 7225.11 and 7226.11), in conventional and high-permeability grades. The functional unit is one tonne. Non-oriented steel for motors is left out.

as of 2026-11-15

#### How it works

How it does its job, step by step in plain words

Iron is magnetic because of small regions called domains. In a transformer core the alternating field makes these domains flip many times a second, and each flip wastes some energy. When the crystals are lined up along the sheet, the domains flip easily and the loss is low ^[7]. Silicon raises the sheet's electrical resistance, which limits the currents that swirl inside it ^[7], and rolling it to 0.2 to 0.35 mm thick limits them further ^[7]^[8]. A final anneal above 1,100 C for more than 10 hours grows the aligned crystals ^[17]. An insulating coating separates the stacked sheets, and a laser can refine the domains further ^[8].

as of 2026-11-15

#### Key specifications

The numbers that describe it, each with unit, variant, year and source

| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Silicon content of the hot-rolled base strip | 3.2 | % of mass | – | 2021 | ^[4]; normally below 3.30% ^[7] |
| Sheet thickness range of one maker's grain-oriented range | 0.20 to 0.35 | mm | – | 2026 | ^[8] |
| Maximum core loss at 1.7 T and 50 Hz, grade 23Z110 (0.23 mm) | 1.1 | W per kg | Conventional | 2026 | ^[8] |
| Maximum core loss at 1.7 T and 50 Hz, grade 35Z155 (0.35 mm) | 1.55 | W per kg | Conventional | 2026 | ^[8] |
| Maximum core loss at 1.7 T and 50 Hz, grade 23ZH85 (0.23 mm) | 0.85 | W per kg | High-permeability | 2026 | ^[8] |
| Maximum core loss at 1.7 T and 50 Hz, laser domain-refined grade 20ZDKH65 (0.20 mm) | 0.65 | W per kg | High-permeability (laser domain-refined) | 2026 | ^[8] |
| Flux density at B10 compared with conventional grades | 0.1 | T higher | High-permeability | 2026 | ^[8] |
| Typical grain size (the review gives the rise from about 0.3 mm to 10 mm with high permeability) | 0.3 | mm | Conventional | 2025 | ^[7] |
| Typical grain size | 10 | mm | High-permeability | 2025 | ^[7] |

as of 2026-11-15. Core loss is a grade's guaranteed maximum W17/50 (1.7 T, 50 Hz) from one maker's catalogue [8]: conventional and high-permeability grades are tested after stress-relief annealing, the laser grade as sheared. Other makers' grades differ.

#### Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

| Variant | Defining spec | Year | Source |
|---|---|---|---|
| Conventional | Crystals about 7 degrees off the ideal Goss direction, grains about 0.3 mm; one maker's range runs 0.23 to 0.35 mm at up to 1.55 W per kg | 2025 | ^[7]^[8]; no share of sales found |
| High-permeability | Crystals within about 3 degrees of the ideal direction, grains about 10 mm, made with an aluminium nitride inhibitor and one-stage cold rolling; laser domain-refined grades go down to 0.65 W per kg; the top permanently refined grade comes only from Nippon Steel | 2025 | ^[7]^[8]^[2]; no share of sales found |

as of 2026-11-15. The DOE names grades CGO, HI-B, PDR and MOH [2]; domain-refined grades are counted here with high-permeability because they start from it [8].

#### Limits

The physical limits set by science and the engineering limits of today's design, with today's value

| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Saturation flux density of silicon iron (best texture reaches B8 of 2.0 T) | Physical | 2.03 | 2 | T | ^[7] |
| Silicon content above which the steel loses ductility and is hard to cold roll thin | Engineering | 3.3 | 3.2 | % of mass | ^[7]^[4] |
| Thinnest sheet in one maker's standard grain-oriented range | Engineering | – | 0.2 | mm | ^[8] |

as of 2026-11-15

#### Science it relies on

The science principles it works by or is limited by
 Relies on

- [Ferromagnetism and magnetic domains](https://www.materialinsights.org/science/ferromagnetism/) Aligned crystals let magnetic domains flip easily, which is why the loss is low; the saturation flux density caps the gain from better texture.
- [Electromagnetic induction](https://www.materialinsights.org/science/electromagnetic_induction/) The core carries the changing flux that induces the voltage in a transformer's windings.

as of 2026-11-15

#### Sources

1. [Electric Grid Supply Chain Review: Large Power Transformers and High Voltage Direct Current Systems](https://www.energy.gov/sites/default/files/2022-02/Electric%20Grid%20Supply%20Chain%20Report%20-%20Final.pdf) US Department of Energy, 2022
2. [Large Power Transformer Resilience: Report to Congress](https://www.energy.gov/sites/default/files/2024-10/EXEC-2022-001242%20-%20Large%20Power%20Transformer%20Resilience%20Report%207-10-24.pdf) US Department of Energy, 2024
3. [Environmental Product Declaration EPD-TKE-20240546-CBC1-EN: powercore grain oriented electrical steel](https://www.thyssenkrupp-steel.com/media/content_1/publikationen/epd/thyssenkrupp_epd_grain_oriented_electrical_steel_en_steel.pdf) thyssenkrupp Electrical Steel, programme holder Institut Bauen und Umwelt e.V. (IBU), 2025
4. [The processing, microstructure, texture, and magnetic properties of electrical steels: A review (He and Kestens, International Materials Reviews 70(5), 353-393)](https://repository.tudelft.nl/file/File_a21e848f-72b1-4ce1-9d83-8ee02186e6fb) TU Delft repository copy, 2025
5. [Grain-Oriented Electrical Steel Sheets (ORIENTCORE product page)](https://www.nipponsteel.com/en/product/electrolytic-tinplate/02.html) Nippon Steel Corporation, 2026
6. [Technologies for high-temperature batch annealing of grain-oriented electrical steel: An overview (Open Engineering 14)](https://orca.cardiff.ac.uk/170404/1/ENG-14-1-10.1515_eng-2024-0053.pdf) De Gruyter, Cardiff University repository copy, 2024

## Other sections

- [Summary](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_grain_oriented_electrical_steel/prod-interventions/index.md)
