# Heat exchanger

A device that moves heat from one fluid to another without mixing them.

Source page: https://www.materialinsights.org/products/p_heat_exchanger/

Machinery and tools · No. 48

- Electrical and chemical age
 Machinery and tools · Product

A plate heat exchanger of about 80 to 230 kg, mostly stainless and carbon steel, can pass 1 MW of heat between two liquids without letting them mix.

Chart: Illustration: Heat exchanger

##### Where it comes from

Chart: Map of where it comes from

APV, the firm founded by Richard Seligman, introduced its plate heat exchanger in 1923, the first commercially available type. It helped bring in modern milk pasteurisation. Alfa-Laval introduced its first heat exchanger in 1938, and SWEP began brazed units in 1983.

##### Three things to know

1. Alfa Laval led the plate heat exchanger market with over 16.5% in 2025, and the top five makers together held about 45%.
2. In Alfa Laval's declaration, energy is typically under 3% of the environmental impact of making a gasketed unit, so the metal itself matters most.
3. Early plate units used milled plates 5 to 10 mm thick; plates in gasketed units are now 0.4 mm thick.

##### The journey

1. 1 **Steel**Stainless steel alloy 304 or 316, with 60 to 90% recycled content
2. 2 **Plates**Stamped from thin sheet, 0.3 to 0.4 mm thick, with a corrugated pattern
3. 3 **Pack**Stacked with rubber gaskets in a carbon steel frame, or brazed together with copper
4. 4 **Duty**Two liquids run in alternate channels and swap heat through the plates
5. 5 **End of life**Metals recycled; rubber gaskets can be burnt for energy
 Covered in [Scale, capacity and feedstock: which chemical plants get builtChemicals](https://www.materialinsights.org/learn/chemicals/scale-capacity-feedstock/)[Efficiency, waste heat and recoveryEnergy](https://www.materialinsights.org/learn/energy/efficiency-and-recovery/)[Fluids: pressure, flow, lift and dragEngineering](https://www.materialinsights.org/learn/engineering/fluids/)[Heat and thermodynamics: engines, heat pumps and their limitsEngineering](https://www.materialinsights.org/learn/engineering/heat-and-thermodynamics/)[Matter at the atomic scale: bonds, reactions and process engineeringEngineering](https://www.materialinsights.org/learn/engineering/matter-and-process/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_heat_exchanger/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_heat_exchanger/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_heat_exchanger/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_heat_exchanger/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_heat_exchanger/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_heat_exchanger/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_heat_exchanger/prod-interventions/index.md)
