# Heat exchanger: Footprint

Source page: https://www.materialinsights.org/products/p_heat_exchanger/prod-footprint/

#### Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

| Variant | Material | Amount (kg) | Emission factor (kg CO2e per kg) | Emissions (kg CO2e) |
|---|---|---|---|---|
| Gasketed | Steel | 201.8 | 1.92 | 387.5 |
| Brazed | Steel | 84.2 | 1.92 | 161.7 |

Worked out from data

#### The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| Gasketed | Making | World | 387 | 100% |
| Gasketed | Use | World | 103,050 | 100% |
| Gasketed | Making | India | 387 | 100% |
| Gasketed | Use | India | 150,750 | 100% |
| Brazed | Making | World | 162 | 100% |
| Brazed | Use | World | – | – |
| Brazed | Making | India | 162 | 100% |
| Brazed | Use | India | – | – |

Worked out from data

#### Energy in use

Energy one unit uses per year of use, by carrier
 Energy in use

- [El Electricity](https://www.materialinsights.org/energy/electricity/) 7500 kWh per year · lifetime 30 years Gasketed Calculated, about: pump electricity to push liquid through one side of a 1 MW gasketed unit designed for 50 kPa. Alfa Laval's 2,000 kW HVAC cooling case needs 73,857 kWh of pump energy in one season of 5,520 hours at 25 m pump head ^[8]; the unit's 50 kPa is about 5.1 m of that head, and halving for 1 MW gives about 7,500 kWh a year. The other side adds a similar amount if designed alike. The 30 years follow the lifetime assumed in a Swedish heat exchanger LCA ^[20].

as of 2026-11-17

#### Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

| Stage | Value | Range | Unit | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|---|
| Making | 206 | 161 to 312 kg CO2 per 1 MW brazed unit (calculated: 84.2 kg x 2.45 kg CO2 per kg of stainless steel at 75% scrap; low 82.4 kg x 1.95 at 85% scrap; high 84.2 kg x 3.70 at 50% scrap); steel only, copper brazing and plate forming left out | kg CO2 per 1 MW brazed unit (calculated: 84.2 kg x 2.45 kg CO2 per kg of stainless steel at 75% scrap; low 82.4 kg x 1.95 at 85% scrap; high 84.2 kg x 3.70 at 50% scrap); steel only, copper brazing and plate forming left out | Brazed | World | 2022 | ^[30]^[4]^[32] |
| Making | 494 | 394 to 846 kg CO2 per 1 MW gasketed unit (calculated: 201.8 kg x 2.45 kg CO2 per kg of stainless steel at 75% scrap; low 201.8 kg x 1.95 at 85% scrap; high 228.7 kg x 3.70 at 50% scrap); whole mass treated as stainless, gaskets and plate forming left out | kg CO2 per 1 MW gasketed unit (calculated: 201.8 kg x 2.45 kg CO2 per kg of stainless steel at 75% scrap; low 201.8 kg x 1.95 at 85% scrap; high 228.7 kg x 3.70 at 50% scrap); whole mass treated as stainless, gaskets and plate forming left out | Gasketed | World | 2022 | ^[30]^[5]^[31] |
| Making | 5980 | – | kg CO2e per Danfoss reference heat exchanger of 610 kg (type not stated), modules A1 to A3, worked example in an unverified declaration (about 9.8 kg CO2e per kg, calculated) | – | World | – | ^[2] |

Indicative · as of 2026-11-17. Indicative only. The per-unit rows apply worldstainless's 2022 stainless steel factors (CO2 per tonne of stainless steel, scopes 1 to 3, by scrap share) [30] to the calculated unit masses; the 75% scrap case matches the 60 to 90% recycled content Alfa Laval gives [1]. Alfa Laval says energy is typically under 3% of the impact of manufacturing [1], so the steel dominates making. The Danfoss figure, about four times higher per kg, comes from a worked example in a declaration that is not externally verified and does not name its heat exchanger type [2]; it is kept as a cross-check. Danfoss and Alfa Laval have registered verified EPDs [28], but their results could not be opened. No published logistics, use or end-of-life figure was found; the site totals use from prod_footprint.energy_in_use.

#### End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Stainless steel recycled at end of life (stainless only) | 70 | World | 2019 | ^[19] |
| Stainless steel recycled at end of life, including the carbon steel cycle | 95 | World | 2019 | ^[19] |
| Rubber gaskets sent for incineration with energy recovery (share not given) | – | World | 2023 | ^[1] |

as of 2026-11-17

#### Recovered as

The commodities and chemicals recovered at end of life, with recovery rates
 Recovered as

- [St Steel](https://www.materialinsights.org/commodities/steel/) 70% recovered · Recycling About 70% of stainless steel was recycled at end of life worldwide in 2019 ^[19]. Alfa Laval says all metallic material in its unit can be recycled and that the unit comes apart readily into main components ^[1].

as of 2026-11-17

#### End of life in India

Collection and recycling in India, including the informal sector

Alfa Laval's declaration says its gasketed unit comes apart into main components, all its metal can be recycled, and rubber gaskets can be incinerated to recover energy ^[1]. Worldwide, about 70% of stainless steel was recycled at end of life in 2019 ^[19]. No source opened covers India, the informal sector or extended producer responsibility for heat exchangers.

as of 2026-11-17

#### Sources

1. [Climate profile declaration: Alfa Laval gasketed plate heat exchangers T15, T10 and T6](https://assets.alfalaval.com/documents/p2d6c3f5a/alfa-laval-climate-profile-declaration-gasketed-plate-heat-exchangers-en.pdf) Alfa Laval, 2023
2. [Annex 1: The sales codes of all products covered in this EPD (Danfoss document BI542129879538, not externally verified)](https://assets.danfoss.com/documents/latest/549979/BI542129879538en-000101.pdf) Danfoss A/S
3. [900kW Brazed plate heat exchanger kit (ACV PHEX spec sheet)](https://downloads.acv.com/ACV%20PHEX%20900kW%20Spec%20Sheet.pdf) ACV
4. [T5-BFG-75M, product page](https://shop.alfalaval.com/en-pl/tap-water-heating--c004/t5-bfg-75m--1289893-) Alfa Laval
5. [Save now, save later: what is the ideal pressure drop to specify for gasketed plate heat exchangers in HVAC applications](https://test03.alfalaval.com/globalassets/documents/industries/hvac/save-now-save-later_what-is-the-ideal-pressure-drop-to-specify-for-gasketed-plate-heat-exchangers-in-hvac-applications.pdf) Alfa Laval
6. [The Global Life Cycle of Stainless Steels](https://extranet.worldstainless.org/files/issf/non-image-files/PDF/Team_Stainless/The_Global_Life_Cycle_of_Stainless_Steels.pdf) International Stainless Steel Forum (worldstainless)
7. [Life Cycle Assessment and Life Cycle Cost of Heat Exchangers (master's thesis by Marcus Adolfsson and Shivan Rashid)](https://odr.chalmers.se/server/api/core/bitstreams/12481487-e9aa-4f55-9833-3d5f9efb389f/content) Chalmers University of Technology, 2016
8. [Stainless Steel CO2 Emission Report](https://worldstainless.org/wp-content/uploads/2025/02/worldstainless_CO2_Emissions_Report.pdf) worldstainless (International Stainless Steel Forum), 2024
9. [T8-BFG-63M, product page](https://shop.alfalaval.com/en-ua/radiator-heating--c003/t8-bfg-63m--1291255-) Alfa Laval
10. [CB200-80M, product page](https://shop.alfalaval.com/en-bg/floor-heating--c002/cb200-80m--1294423-) Alfa Laval

## Other sections

- [Summary](https://www.materialinsights.org/products/p_heat_exchanger/index.md)
- [Working](https://www.materialinsights.org/products/p_heat_exchanger/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_heat_exchanger/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_heat_exchanger/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_heat_exchanger/prod-supply/index.md)
- [Evolution](https://www.materialinsights.org/products/p_heat_exchanger/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_heat_exchanger/prod-interventions/index.md)
