# Heat exchanger: Interventions

Source page: https://www.materialinsights.org/products/p_heat_exchanger/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Substitute | Components design | Make plates and frames from low-emission stainless and carbon steel | Up to 60% lower emissions on the delivered unit against average material alternatives, cradle to grave, for five TL10 units | deployed in a 2025 delivery | One reported project; no share of units found | Heat exchanger makers and steel mills | ^[21] |
| Design | Components design | Specify a higher allowed pressure drop, so that fewer plates are needed | Up to 10% saving in purchase cost at 50 kPa instead of 20 kPa; pumping cost rises, and the mass saved is not given | deployed | A rule of thumb of 50 to 70 kPa is given for HVAC cooling | Buyers, consultants and makers | ^[8] |
| Substitute | Components design | Use a plate unit in place of a shell and tube unit where pressure allows | The maker claims less than 1/16 of the total weight and 1/10 of the floor space | deployed | Plate and frame units are a large part of the heat exchanger market; share of duties switched not found | Plant designers | ^[6]^[27] |
| Circularity | End of life | Recondition plates and replace gaskets, then recycle the metal at the end | Keeps the plate pack in service (an audited fleet reached 11 years); about 70% of stainless steel is recycled at end of life | deployed | Reconditioning was recommended for 39 units in one audit | Operators and service providers | ^[26]^[19] |
| Business model | Use | Audit the condition of gaskets and plates to schedule service | Predicts gasket life, which varies with operating conditions; no emissions figure given | deployed | Offered by Alfa Laval for plate heat exchangers | Makers and operators | ^[26] |

as of 2026-11-17

#### Sources

1. [Gasketed plate heat exchangers: GPHE vs shell-and-tube](https://www.alfalaval.com/microsites/gphe/tools/gphe-vs-shell-and-tube/) Alfa Laval
2. [Save now, save later: what is the ideal pressure drop to specify for gasketed plate heat exchangers in HVAC applications](https://test03.alfalaval.com/globalassets/documents/industries/hvac/save-now-save-later_what-is-the-ideal-pressure-drop-to-specify-for-gasketed-plate-heat-exchangers-in-hvac-applications.pdf) Alfa Laval
3. [The Global Life Cycle of Stainless Steels](https://extranet.worldstainless.org/files/issf/non-image-files/PDF/Team_Stainless/The_Global_Life_Cycle_of_Stainless_Steels.pdf) International Stainless Steel Forum (worldstainless)
4. [Collaborative innovation cuts heat exchanger carbon footprint by 60 percent for hospital in Helsinki](https://www.alfalaval.com/media/stories/cooling/collaborative-innovation-cuts-heat-exchanger-carbon-footprint-by-60-percent-for-hospital-in-helsinki/) Alfa Laval, 2025
5. [Predicting gasket lifetime with Alfa Laval Performance Audit (Jubail, Saudi Arabia)](https://www.alfalaval.com/media/stories/service/predicting-gasket-lifetime-with-alfa-laval-condition-audit-for-plate-heat-exchangers-in-saudi-arabia/) Alfa Laval, 2025
6. [Plate Heat Exchanger vs Shell & Tube Heat Exchanger: Key Differences](https://www.alfalaval.in/media/stories/plate-vs-shell-tube-heat-exchanger-key-differences/) Alfa Laval India, 2026

## Other sections

- [Summary](https://www.materialinsights.org/products/p_heat_exchanger/index.md)
- [Working](https://www.materialinsights.org/products/p_heat_exchanger/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_heat_exchanger/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_heat_exchanger/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_heat_exchanger/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_heat_exchanger/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_heat_exchanger/prod-evolution/index.md)
