# Industrial air compressor: Bill of materials

Source page: https://www.materialinsights.org/products/p_industrial_air_compressor/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

No life-cycle study or EPD opened gives a bill of materials by weight for an industrial screw compressor, and the EU Lot 31 study reports (2014, 2017) could not be opened. The masses found are 990 kg for a 75 kW variable-speed package ^[12] and about 15 kg per kW for a 300 kW unit in ecoinvent ^[20]. The materials are named from general engineering practice, without amounts. The air end, oil separator, piston compressors, air dryers and receivers are not yet nodes.

as of 2026-11-16

#### Components

The products inside one unit, with quantity, mass share and cost share
 Variant 1 **Not stated**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Electric motor](https://www.materialinsights.org/products/p_electric_motor/) | Component | 1 | – |
| The 75 kW drive motor ^[12], with copper windings and a steel and cast iron frame; its own materials are counted in the motor node. |  |  |  |
| [Heat exchanger](https://www.materialinsights.org/products/p_heat_exchanger/) | Component | Not given | – |
| Air and oil coolers take away the heat of compression; count not found. |  |  |  |
| [Rolling bearing](https://www.materialinsights.org/products/p_rolling_bearing/) | Component | Not given | – |
| Bearings carry the two rotors; count not found. |  |  |  |

 Variant 2 **Variable-speed screw**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Variable speed drive](https://www.materialinsights.org/products/p_variable_speed_drive/) | Component | 1 | – |
| The frequency converter that sets motor speed, rated for the 75 kW motor ^[12]; its power modules and other materials are counted in the drive node, whose unit is a 37 kW drive. |  |  |  |

as of 2026-11-16

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Structural | Not given | – |
| Frame, enclosure, shafts, pipework and cast iron casings. No source opened gives kilograms by material for a compressor; the whole package weighs 990 kg ^[12]. |  |  |  |
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Functional | Not given | – |
| Coolers and some housings; amount not found in any source opened. |  |  |  |
| [Cu Copper](https://www.materialinsights.org/commodities/copper/) | Functional | Not given | – |
| Windings and wiring outside the motor node; amount not found. |  |  |  |
| [Lub Lubricant additives](https://www.materialinsights.org/chemicals/lubricant_additives/) | Consumable | Not given | – |
| The additives in the compressor lubricant oil that cools and seals an oil-injected unit; the oil is topped up and changed through life. Amount not found. |  |  |  |

as of 2026-11-16

#### Cost breakdown

The share of the unit's cost in each component or stage

| Part | Share of cost | Year | Source |
|---|---|---|---|
| Electricity over the life of the compressor (Australian estimate, all industrial air compressors) | 86% | 2020 | ^[4] |
| Energy in the yearly cost of buying and running the EU's rotary standard air compressor packages, 2020 estimate | 80% | 2020 | ^[5] |

as of 2026-11-16

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Cast and machine the air end | The casing is cast from iron and the two helical rotors are machined to fine tolerances. | – | – |
| Fit rotors and bearings | The rotors are mounted in bearings inside the casing and set to a close clearance. | – | – |
| Couple the motor | The electric motor is coupled to the air end, directly or through gears or belts. | Electric motors and drives | – |
| Add cooling and separation | Coolers, the oil separator, filters and pipework are mounted on the frame. | – | – |
| Fit controls and enclosure | A controller, and a frequency converter in a variable-speed unit, and a sound-proof enclosure are added. | Transformers and power electronics | – |
| Test | The finished package is run and its delivery and power measured; India has adopted ISO 1217 for this as IS/ISO 1217 ^[7]. | – | ^[7] |

as of 2026-11-16

#### Technologies inside it

The technologies inside the product, with how much of each per unit
 Embodies

- [Mot Electric motors and drives](https://www.materialinsights.org/technologies/e_motors/) 1 motor One electric motor drives the rotors ^[12].
- [PE Transformers and power electronics](https://www.materialinsights.org/technologies/e_power_electronics/) 1 frequency converter Variable-speed screw Changes motor speed to follow demand.

as of 2026-11-16

#### Sources

1. [Industrial Air Compressors: Technical Discussion Paper](https://energyrating.gov.au/sites/default/files/2022-12/Technical%20Discussion%20Paper-Compressors.pdf) Australian Government, Department of Industry, Science, Energy and Resources (Energy Rating), 2020
2. [Possible ecodesign requirements for standard air compressor packages (working document)](https://www.energimyndigheten.se/globalassets/energieffektivisering_/jag-ar-saljare-eller-tillverkare/dokument/produkter-med-krav/elektriska-kompressorer/2019-07-19-wd-standard-air-compressors-2.pdf) European Commission working document, hosted by the Swedish Energy Agency
3. [Development of a Standards and Labeling Program for Air Compressors in India](https://www.clasp.ngo/wp-content/uploads/2021/01/Development-of-a-Standards-and-Labeling-Program-for-Air-Compressors-in-India.pdf) CLASP, with PwC India, 2020
4. [GA 7-90 VSD iPM oil-injected rotary screw compressors (brochure 2935 0816 48)](https://aircompressors.com/assets/34/32/34326de3-8bb6-461e-a986-1a38d4bac02b/GA%207-90%20VSD%20Oil-Injected%20Rotary%20Screw%20Compressors.pdf) Atlas Copco, 2022
5. [Metals treatment and compressed air supply (ecoinvent forum presentation, Frischknecht and Steiner, ESU-services)](https://forum.ecoinvent.org/files/200803_11_frischknecht_metals_treatment_and_compressed_air_supply.pdf) ecoinvent forum, 2008

## Other sections

- [Summary](https://www.materialinsights.org/products/p_industrial_air_compressor/index.md)
- [Working](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-interventions/index.md)
