# Industrial air compressor: Working

Source page: https://www.materialinsights.org/products/p_industrial_air_compressor/prod-working/

#### What it is

The product and the job it does, in a short paragraph

An industrial air compressor is a machine that squeezes air to a higher pressure, 4 to 12.5 bar for the reference machine ^[12], so that factories can power tools, valves, packaging and processes. The functional unit is one 75 kW industrial screw compressor package, with its motor, cooler, separator and controls. The scope is electric rotary screw units; piston compressors, portable engine-driven compressors and gas compressors are left out.

as of 2026-11-16

#### How it works

How it does its job, step by step in plain words

Two meshing helical rotors turn inside a casing. Air enters at one end, is trapped in the gaps between the rotors and the casing, and is squeezed into a smaller space as the rotors turn. In an oil-injected unit, oil is sprayed in to seal the gaps, cool the air and lubricate the rotors, and is then removed again in a separator. An oil-free unit leaves oil out of the compression chamber, and a centrifugal unit uses a fast impeller instead of rotors. Squeezing air makes heat, and more than 80% of the electrical energy becomes heat that must be cooled away ^[1]. A fixed-speed machine loads and unloads to follow demand. A variable-speed machine changes the motor speed instead ^[12].

as of 2026-11-16

#### Key specifications

The numbers that describe it, each with unit, variant, year and source

| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Motor rating of the reference machine | 75 | kW | Variable-speed screw | 2022 | ^[12] |
| Free air delivery at 7 bar, lowest to highest | 42.1 to 225.0 | l/s | Variable-speed screw | 2022 | ^[12] |
| Mass of the packaged GA 75 VSD iPM | 990 | kg | Variable-speed screw | 2022 | ^[12] |
| Mass per kW, calculated from 990 kg and 75 kW | 13.2 | kg/kW | Variable-speed screw | 2022 | ^[12] |
| Specific power at full load and 100 psig, single-stage lubricant-injected screw | 16 to 19 | kW per 100 cfm | Fixed-speed oil-injected screw | – | ^[1] |
| Specific power at full load and 100 psig, centrifugal | 16 to 20 | kW per 100 cfm | Oil-free or centrifugal | – | ^[1] |
| Speed range with best efficiency for a variable-speed unit | 30 to 80 | % of full speed | Variable-speed screw | – | ^[1] |
| Average lifetime of the compressors in the US standard | 13 | years | Fixed-speed oil-injected screw | 2020 | ^[11] |

as of 2026-11-16

#### Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

| Variant | Defining spec | Year | Source |
|---|---|---|---|
| Fixed-speed oil-injected screw | Motor at one speed; the machine loads and unloads to meet demand; oil seals and cools the compression | – | The majority of industrial air compressors use rotary screws ^[4]; no share of units found |
| Variable-speed screw | Frequency converter changes motor speed to match demand; adds power electronics | 2020 | Variable-speed, oil-free and low-pressure types together held under 5% of the Indian market in 2020 ^[7] |
| Oil-free or centrifugal | No oil in the compression chamber, or a high-speed impeller for large flows of oil-free air | 2020 | Centrifugal units suit larger quantities of oil-free air ^[21]; oil-free, variable-speed and low-pressure types together held under 5% of the Indian market in 2020 ^[7] |

as of 2026-11-16

#### Limits

The physical limits set by science and the engineering limits of today's design, with today's value

| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Compression turns most input energy into heat (share of electrical input that becomes available heat) | Physical | – | 80 | % or more | ^[1] |
| Wire-to-work efficiency of the whole system, motor to tool | Engineering | – | 10 | % | ^[1] |
| Spread in isentropic efficiency between standard packages (best against worst) | Engineering | – | about 20 to 30 | percentage points | ^[6] |
| Leaks as a share of compressor output in a poorly maintained plant | Engineering | 0 | 20 | % of output | ^[2] |

as of 2026-11-16

#### Science it relies on

The science principles it works by or is limited by
 Relies on

- [Gas laws](https://www.materialinsights.org/science/ideal_gas_laws/) Squeezing a gas into less volume raises its pressure and temperature.
- [First law of thermodynamics](https://www.materialinsights.org/science/first_law_thermodynamics/) The shaft work put in leaves as the energy of the compressed air and as heat.
 Limited by

- [Second law of thermodynamics](https://www.materialinsights.org/science/second_law_thermodynamics/) Compression work cannot be recovered once the heat is lost, so most input ends as heat.

as of 2026-11-16

#### Sources

1. [Improving Compressed Air System Performance: A Sourcebook for Industry (third edition)](https://www.energy.gov/sites/prod/files/2016/03/f30/Improving%20Compressed%20Air%20Sourcebook%20version%203.pdf) US Department of Energy and Compressed Air Challenge, 2016
2. [Compressed Air System Leaks (Improving Compressed Air System Performance, Fact Sheet #7, Rev. 1)](https://www.compressedairchallenge.org/data/sites/1/media/library/factsheets2026/fact-sheet-7-compressed-air-system-leaks_updated2026.pdf) Compressed Air Challenge, 2026
3. [Industrial Air Compressors: Technical Discussion Paper](https://energyrating.gov.au/sites/default/files/2022-12/Technical%20Discussion%20Paper-Compressors.pdf) Australian Government, Department of Industry, Science, Energy and Resources (Energy Rating), 2020
4. [Energy efficiency and industrial compressors](https://www.ipesearch.co.uk/page_530192.asp) IP&E (ipesearch.co.uk), 2014
5. [Development of a Standards and Labeling Program for Air Compressors in India](https://www.clasp.ngo/wp-content/uploads/2021/01/Development-of-a-Standards-and-Labeling-Program-for-Air-Compressors-in-India.pdf) CLASP, with PwC India, 2020
6. [Energy Conservation Program: Energy Conservation Standards for Compressors (final rule, 10 January 2020)](https://www.govinfo.gov/content/pkg/FR-2020-01-10/html/2019-26355.htm) US Federal Register, 2020
7. [GA 7-90 VSD iPM oil-injected rotary screw compressors (brochure 2935 0816 48)](https://aircompressors.com/assets/34/32/34326de3-8bb6-461e-a986-1a38d4bac02b/GA%207-90%20VSD%20Oil-Injected%20Rotary%20Screw%20Compressors.pdf) Atlas Copco, 2022
8. [Ingersoll Rand Inc. Form 10-K for the fiscal year ended 31 December 2021](https://www.sec.gov/Archives/edgar/data/1699150/000162828022003991/gdi-20211231.htm) US Securities and Exchange Commission, 2022

## Other sections

- [Summary](https://www.materialinsights.org/products/p_industrial_air_compressor/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_industrial_air_compressor/prod-interventions/index.md)
