# Industrial robot: Interventions

Source page: https://www.materialinsights.org/products/p_industrial_robot/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts |
|---|---|---|---|---|---|---|
| Efficiency | Use | Recover braking energy in the drives | Empirical energy reductions of 8 to 25%; about 2,800 kWh a year saved per robot, about 1,600 kg of avoided CO2 ^[8] | Deployed (maker's claim) | Not found in sources | Robot makers, plant operators |
| Efficiency | Use | New controller and motion planning software | Up to 20% lower energy consumption against the previous controller; path planning adds 10 to 15% ^[9] | Deployed (maker's claim) | Not found in sources | Robot makers |
| Efficiency | Use | Cut the constant power draw while the robot runs or idles | The 100 W constant draw of one small collaborative arm (a UR5) was about half of its 6,913 kWh over 36,000 h (calculated) ^[4] | Research; no source tests it | Not found in sources | Robot makers |
| Substitute | Use | Run robots on low-carbon electricity | ABB's studies say more than 70% of its customers' robots' carbon footprint comes from electricity ^[10]; in the UR5 study (one small collaborative arm) it was 88% or more ^[4] | Deployed where grids allow | Not found in sources | Plant operators, utilities |
| Circularity | End of life | Recondition used robots for a second or third life | Reconditioning emits 75% less CO2 than making a new robot (ABB); over 12,000 robots reconditioned in 30 years ^[9] | Deployed | Over 12,000 ABB robots in 30 years; between 10 and 20% of reconditioned ones go to a third installation ^[9] | Robot makers, owners |
| Business model | End of life | Keep robots in use longer than the typical eight years | Some Motoman robots are still working after 30 years ^[8] | Deployed | Not found in sources | Owners, makers |

as of 2026-11-13

#### Sources

1. [Impact of Cycle Time and Payload of an Industrial Robot on Resource Efficiency (Stuhlenmiller, Weyand, Jungblut, Schebek, Clever and Rinderknecht, Robotics 10(1), 33)](https://www.mdpi.com/2218-6581/10/1/33) MDPI, 2021
2. [Sustainability in industrial robots](https://www.yaskawa.eu.com/header-meta/news-events/article/sustainability-in-industrial-robots-_n19708) Yaskawa Europe, 2023
3. [Sustainability approach: sustainability along the robot life cycle](https://www.industrial-production.de/industrial-robots/sustainability-approach-sustainability-along-the-robot-life-cycle.htm) industrial-production.de
4. [ABB Robotics leads global effort to standardize measurement of industrial robots' energy consumption](https://ifr.org/ifr-press-releases/news/abb-robotics-leads-global-effort-to-standardize-measurement-of-industrial-robots-energy-consumption) International Federation of Robotics (member news), 2026

## Other sections

- [Summary](https://www.materialinsights.org/products/p_industrial_robot/index.md)
- [Working](https://www.materialinsights.org/products/p_industrial_robot/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_industrial_robot/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_industrial_robot/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_industrial_robot/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_industrial_robot/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_industrial_robot/prod-evolution/index.md)
