# Insulating glass unit: Bill of materials

Source page: https://www.materialinsights.org/products/p_insulating_glass_unit/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

Composition follows one AGC declaration for a 4-16-4 low-e argon unit (data year 2016, published 2019) ^[1] and one Pilkington declaration for a 4/12/4/12/4 triple unit (2023) ^[2]. Spacer mass depends on its material ^[1]. Sand, soda ash and limestone sit inside the flat glass sheet node; the coated pane (low-e coated glass) is counted there too until it has a node. Float glass cullet, the tin bath, stainless steel and polyamide spacers, and packaging are named here but not linked as separate nodes.

as of 2026-11-16

#### Components

The products inside one unit, with quantity, mass share and cost share
 Variant 1 **Argon low-e double**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Flat glass sheet](https://www.materialinsights.org/products/p_flat_glass_sheet/) | Component | 2 | **97%** |
| Two 4 mm panes, 20 kg of 20.6 kg per m2 (calculated); glass is about 97% of the unit's mass ^[1]. Sand, soda ash and lime inputs are counted in the glass node. |  |  |  |

 Variant 2 **Triple**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Flat glass sheet](https://www.materialinsights.org/products/p_flat_glass_sheet/) | Component | 3 | **97%** |
| Three 4 mm panes, 30 kg of 31 kg per m2 ^[2]; two are offline coated glass. |  |  |  |

as of 2026-11-16

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant 1 **Argon low-e double**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Adh Adhesives and sealants](https://www.materialinsights.org/chemicals/adhesives/) | Functional | 0.33 kg | **1.6%** |
| About 30 g polyisobutylene primary seal plus about 300 g polysulfide, silicone or polyurethane outer seal ^[1] (calculated sum). |  |  |  |
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 0.2 kgrange 0.15 to 0.26 kg | **1%** |
| Spacer bar of about 150 to 260 g depending on material (stainless steel, aluminium or polyamide/steel) ^[1]; linked to aluminium as an assumption, mid-range used here, share calculated on 20.6 kg. |  |  |  |
| [Zeo Zeolites](https://www.materialinsights.org/commodities/zeolites/) | Functional | 0.07 kg | **0.3%** |
| Zeolite desiccant, about 70 g per m2 ^[1]. |  |  |  |
| [Ar Argon](https://www.materialinsights.org/chemicals/argon/) | Functional | 0.026 kg | **0.1%** |
| 14.4 litres, about 25.6 g per m2, at about 90% argon in the gap ^[1]. |  |  |  |
| [Ag Silver](https://www.materialinsights.org/commodities/silver/) | Functional | 0 kgrange 0 to 0 kg | **0.001%** |
| Calculated: a silver layer of 8 to 12 nm ^[34] at a density of 10.5 g per cm3 is about 0.08 to 0.13 g per m2 per layer. The whole magnetron coating stack is about 1 g per m2 ^[1]. |  |  |  |

 Variant 2 **Triple**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Adh Adhesives and sealants](https://www.materialinsights.org/chemicals/adhesives/) | Functional | 0.5 kg | **1.6%** |
| Polymer sealants 0.5 kg per m2 ^[2]. |  |  |  |
| [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) | Structural | 0.3 kg | **1%** |
| Aluminium 0.3 kg per m2 in the declared composition ^[2]. |  |  |  |
| [Zeo Zeolites](https://www.materialinsights.org/commodities/zeolites/) | Functional | up to 0.1 kga range, no single figure | – |
| Desiccant is given only as less than 0.1 kg per m2 ^[2]; assumed zeolite as in the AGC unit. |  |  |  |
| [Ar Argon](https://www.materialinsights.org/chemicals/argon/) | Functional | up to 0.1 kga range, no single figure | – |
| Argon is given only as less than 0.1 kg per m2 in two 12 mm gaps ^[2]. |  |  |  |

as of 2026-11-16

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Glass | Float glass is made from about 70 to 75% silica sand, 15% soda ash and 15% limestone and dolomite, plus 15 to 25% crushed recycled glass, melted at 1,500 to 1,600 degrees Celsius | Float glass | ^[29] |
| Coat | A low-e coating goes on one pane, either onto hot glass in the float line (pyrolytic) or on cold glass in a vacuum (sputtered) | – | ^[35] |
| Spacer frame | Spacer bars of aluminium, stainless steel or polymer, holding zeolite desiccant, are formed into a frame that keeps the cavity dry | – | ^[1]^[15]^[30] |
| Primary seal | Polyisobutylene, the most common primary seal, is applied to the spacer and pressed against the glass | – | ^[30]^[31] |
| Fill | Argon replaces air in the gap, to about 90% argon | – | ^[1]^[31] |
| Secondary seal | Polysulfide, silicone or polyurethane fills the channel between spacer and glass edges, bonds the panes and keeps moisture out | – | ^[30]^[31] |

as of 2026-11-16

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [Gl Glassmaking](https://www.materialinsights.org/technologies/glassmaking/) Melting the sand, soda ash, limestone and cullet batch The float line furnace has a melting zone of about 1,500 to 1,600 degrees Celsius ^[29].
- [FG Float glass](https://www.materialinsights.org/technologies/float_glass/) Forming the ribbon of flat glass that each pane is cut from The twin technology; ribbon thickness ranges from about 2 to 19 mm ^[29].

as of 2026-11-16

#### Sources

1. [Environmental Product Declaration: Low-e/solar control double glazing units (Thermobel, Thermobel Stopray, iplus IGU, ipasol IGU), 4-16-4 reference unit](https://www.agc-yourglass.com/sites/default/files/2021-04/EPD%20-%20AGC%20-%20Double%20glazing%20unit%204-16-4%20vEN.PDF) AGC Glass Europe, 2019
2. [Pilkington Insulight TRIPLE 4/12/4/12/4 triple IGU with 2 x offline coated glass (EPD S-P-02592)](https://api.environdec.com/api/v1/EPDLibrary/Files/031486b8-1d98-4ee3-5090-08dbd569605a/Data) Pilkington (NSG Group), via EPD International, 2023
3. [Advances in glazing products part 1: anatomy and performance of conventional glazing](https://enclos.com/feature-articles/advances-in-glazing-products-part-1) Enclos, 2024
4. [A short guide to how glass is made](https://www.guardianglass.com/eu/en/why-glass/understand-glass/how-glass-is-made) Guardian Glass
5. [Expert series: insulating glass, the history, evolution and mechanics of the IGU](https://www.guardianglass.com/content/dam/guardianindustriesholdings/collateral/usca/brochure_expert_series_EN_doc3_igu_2020.pdf) Guardian Glass, 2020
6. [TechDirect white paper: understanding IGU specification](https://viridianglass.com/wp-content/uploads/2025/04/Viridian-TechDirect™-White-Paper-Understanding-IGU-Specification.pdf) Viridian Glass, 2025
7. [Silver (low-e sputtering target), The Supply Map](https://policyrisk.com/supplymap/input/silver-lowe-coating) PRIA Technologies (PolicyRisk supply map)
8. [The science of low-e coatings](https://glassed.vitroglazings.com/the-science-of-low-e-coatings) Vitro Architectural Glass

## Other sections

- [Summary](https://www.materialinsights.org/products/p_insulating_glass_unit/index.md)
- [Working](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_insulating_glass_unit/prod-interventions/index.md)
