# PET bottle

A light plastic bottle for water, soft drinks and other liquids.

Source page: https://www.materialinsights.org/products/p_pet_bottle/

Packaging · No. 98

- Digital age
 Packaging · Product

A 500 ml PET water bottle can weigh about 13 g plus a 1.6 g cap, and a 2017 study found India recycles about 70% of its PET waste.

Chart: Illustration: PET bottle

##### Where it comes from

Chart: Map of where it comes from

Nathaniel Wyeth of DuPont started work on the PET bottle in 1967 and patented his stretch blow moulding process in 1973. The first PET drinks bottle, a 64 oz Pepsi bottle, came out in 1977, and Coca-Cola launched a two-litre PET bottle in 1978.

##### Three things to know

1. A PET bottle can be made with 100% recycled content, and a Spa bottle became about 50% lighter between 1970 and 2015.
2. Resin for the body of a 500 ml water bottle gives off about 0.03 kg CO2e, recycled resin about a third of that, and a European study puts the whole life of such a bottle at about 0.06 kg CO2e (calculated).
3. India's EPR rules ask brand owners for 30% recycled content in rigid plastic packaging in 2025-26, rising to 60% from 2028-29.

##### The journey

1. 1 **Monomers**Paraxylene is turned into purified terephthalic acid; ethylene becomes monoethylene glycol
2. 2 **Resin**The two react with an antimony catalyst, then solid-state polymerisation lifts the chain length for bottle-grade PET
3. 3 **Preform**Resin is injection moulded into a small thick tube with the cap thread already formed
4. 4 **Bottle**The preform is reheated and blown with air, stretching it in two directions
5. 5 **Filled and used**A bottler fills the bottle and seals it with an HDPE cap
6. 6 **End of life**Collected, sorted and recycled to flake and pellets, or landfilled or burnt

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_pet_bottle) Switch on levers and see what changes in India by 2036.
 Covered in [Bioplastics: PLA, PHA, bio-PE and starch blendsChemicals](https://www.materialinsights.org/learn/chemicals/bioplastics-pla-pha-biope-starch/)[Fluids: pressure, flow, lift and dragEngineering](https://www.materialinsights.org/learn/engineering/fluids/)[Matter at the atomic scale: bonds, reactions and process engineeringEngineering](https://www.materialinsights.org/learn/engineering/matter-and-process/)[Cost, trade-offs and resources: why the best design is rarely the strongestEngineering](https://www.materialinsights.org/learn/engineering/cost-tradeoffs-resources/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_pet_bottle/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_pet_bottle/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_pet_bottle/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_pet_bottle/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_pet_bottle/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_pet_bottle/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_pet_bottle/prod-interventions/index.md)
