# Plastic foam insulation board: Footprint

Source page: https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-footprint/

#### Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

| Variant | Material | Amount (kg) |
|---|---|---|
| EPS | Polystyrene and EPS | 2.25 |
| EPS | Flame retardants | 0.03 |
| XPS | Polystyrene and EPS | 1.9 |
| PIR | Polyurethanes (MDI, TDI, polyols) | 2.8 |
| PIR | Flame retardants | 0.11 |

Worked out from data

#### The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| EPS | Making | World | 21.8 | 0% |
| EPS | Use | World | -4810 | 100% |
| EPS | Making | India | 21.8 | 0% |
| EPS | Use | India | -4810 | 100% |
| XPS | Making | World | 16.6 | 0% |
| XPS | Use | World | -4987 | 100% |
| XPS | Making | India | 16.6 | 0% |
| XPS | Use | India | -4987 | 100% |
| PIR | Making | World | 18.1 | 0% |
| PIR | Use | World | -5100 | 100% |
| PIR | Making | India | 18.1 | 0% |
| PIR | Use | India | -5100 | 100% |

Worked out from data

#### Energy to make it

Energy used to make one unit, by carrier and stage
 Energy to make

- [Ht Heat](https://www.materialinsights.org/energy/heat/) 311 MJ · Materials EPS Calculated: total primary energy A1 to A3 of the 24 kg/m3 declaration, 44.4 MJ renewable (TPE) plus 67.7 MJ non-renewable (TRPE) = 112.1 MJ per m2 at R = 1 (36 mm) ^[1], times 100/36 gives about 311 MJ (about 86 kWh) per m2 at 100 mm. It includes the energy content of the plastic itself.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) 236 MJ · Materials XPS Calculated: total primary energy A1 to A3 of the 2021 Styrofoam declaration, 1.81 MJ renewable plus 63.2 MJ non-renewable = 65.0 MJ per m2 at RSI 1 (27.6 mm) ^[2], times 100/27.6 gives about 236 MJ (about 65 kWh) per m2 at 100 mm. It includes the energy content of the plastic.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) 258 MJ · Materials PIR Calculated: total primary energy A1 to A3 of the IVPU declaration, 27.1 MJ renewable plus 282 MJ non-renewable = 309 MJ per m2 of a 120 mm board with aluminium facings ^[7], times 100/120 gives about 258 MJ (about 72 kWh) per m2 at 100 mm. Scaling the facings with thickness makes this approximate.

Indicative · as of 2026-11-17. Each figure is scaled in proportion to thickness from the declared unit (R = 1, RSI 1 or 120 mm) to the catalogue's 100 mm, so it is calculated, and indicative because declarations differ in method and region. The figures are total primary energy, not a single carrier, so they are entered under heat.

#### Energy in use

Energy one unit uses per year of use, by carrier
 Energy in use 6

- [Ht Heat](https://www.materialinsights.org/energy/heat/) -243 kWh per year · lifetime 50 years EPS Calculated for 100 mm on an uninsulated solid wall in Finland: R added = 0.100 / 0.036 = 2.78 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 2.78) = 0.307; saving 1.79 W/m2K times 5,656 K day per year ^[41] times 24 h = about 243 kWh per m2 a year. Negative means heat saved.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) -138 kWh per year · lifetime 50 years EPS Calculated for 100 mm on an uninsulated solid wall in the EU average: R added = 0.100 / 0.036 = 2.78 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 2.78) = 0.307; saving 1.79 W/m2K times 3,199 K day per year ^[41] times 24 h = about 138 kWh per m2 a year. Negative means heat saved.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) -252 kWh per year · lifetime 50 years XPS Calculated for 100 mm on an uninsulated solid wall in Finland: R added = 0.100 / 0.0276 = 3.62 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 3.62) = 0.244; saving 1.86 W/m2K times 5,656 K day per year ^[41] times 24 h = about 252 kWh per m2 a year. Negative means heat saved.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) -143 kWh per year · lifetime 50 years XPS Calculated for 100 mm on an uninsulated solid wall in the EU average: R added = 0.100 / 0.0276 = 3.62 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 3.62) = 0.244; saving 1.86 W/m2K times 3,199 K day per year ^[41] times 24 h = about 143 kWh per m2 a year. Negative means heat saved.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) -258 kWh per year · lifetime 50 years PIR Calculated for 100 mm on an uninsulated solid wall in Finland: R added = 0.100 / 0.022 = 4.55 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 4.55) = 0.199; saving 1.90 W/m2K times 5,656 K day per year ^[41] times 24 h = about 258 kWh per m2 a year. Negative means heat saved.
- [Ht Heat](https://www.materialinsights.org/energy/heat/) -146 kWh per year · lifetime 50 years PIR Calculated for 100 mm on an uninsulated solid wall in the EU average: R added = 0.100 / 0.022 = 4.55 m2K/W; baseline U0 = 2.1 W/m2K, the value assumed for UK solid walls ^[42], so R0 = 0.476; U1 = 1/(0.476 + 4.55) = 0.199; saving 1.90 W/m2K times 3,199 K day per year ^[41] times 24 h = about 146 kWh per m2 a year. Negative means heat saved.

Estimate · as of 2026-11-17. Steady-state estimate of useful heat, applying the UK's assumed solid-wall U-value to Finnish and EU average heating degree days (base 18 degrees Celsius, 1979 to 2022), and ignoring thermal bridges, heating-system efficiency and cooling. Measured solid walls average 1.3 W/m2K [42], which would shrink the savings. Against about 86 kWh of primary energy to make EPS (including feedstock energy), payback is about 0.4 years in Finland and 0.6 at the EU average for EPS (calculated). PU Europe's 2014 fact sheet models 8,100 kWh saved per m2 over 50 years for 115 mm of PU (R = 5) and a payback of about half a year [8].

#### Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

| Stage | Value | Range | Unit | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|---|
| Making | 5.83 | 3.95 to 7.41 kg CO2e per m2 at 100 mm, A1 to A3 (calculated: 2.10 per R = 1 at 36 mm for 24 kg/m3, times 100/36; low and high are the 16 and 30 kg/m3 grades scaled the same way, 1.58 times 100/40 and 2.52 times 100/34) | kg CO2e per m2 at 100 mm, A1 to A3 (calculated: 2.10 per R = 1 at 36 mm for 24 kg/m3, times 100/36; low and high are the 16 and 30 kg/m3 grades scaled the same way, 1.58 times 100/40 and 2.52 times 100/34) | EPS | Europe | 2024 | ^[1] |
| Making | 12.7 | – | kg CO2e per m2 at 100 mm, A1 to A3 (calculated: 3.51 per RSI 1 at 27.6 mm, times 100/27.6; TRACI method) | XPS | North America | 2021 | ^[2] |
| Making | 9.77 | – | kg CO2e per m2 at RSI 1, Foamular NGX, as published | XPS | North America | – | ^[3] |
| Making | 57.8 | – | kg CO2e per m2 at RSI 1, legacy Owens Corning XPS blend, as published | XPS | North America | – | ^[3] |
| Making | 9.2 | – | kg CO2e per m2 at 100 mm, A1 to A3 with facings (calculated: 11.0 for a 120 mm board, times 100/120; facings scaled with thickness, so approximate) | PIR | Europe | 2023 | ^[6] |
| Making | 9.3 | – | kg CO2e per m2 at 100 mm, A1 to A3 with aluminium facings (calculated: 11.2 for a 120 mm board, times 100/120; facings scaled with thickness, so approximate) | PIR | Germany | 2021 | ^[7] |
| Making | 7.9 | – | kg CO2e per m2 at 100 mm (calculated: 3.29 per kg times 2.4 kg; ICE v4.1) | EPS | World | 2025 | ^[40] |
| Making | 10.9 | 9.7 to 12.2 kg CO2e per m2 at 100 mm (calculated: 3.60 to 4.50 per kg times 2.7 kg; ICE v4.1) | kg CO2e per m2 at 100 mm (calculated: 3.60 to 4.50 per kg times 2.7 kg; ICE v4.1) | XPS | World | 2025 | ^[40] |
| Making | 10.4 | – | kg CO2e per m2 at 100 mm (calculated: 3.48 per kg times 3.0 kg; ICE v4.1) | PIR | World | 2025 | ^[40] |

Indicative · as of 2026-11-17. Declared figures are scaled in proportion to thickness to the catalogue's 100 mm. The XPS figures differ because of formulation and method: the Styrofoam 2021 declaration is TRACI-based and low-GWP, while the Owens Corning pair compares a new blend with a legacy one at RSI 1 as published [2][3]. The ICE rows use illustrative per-kg values from a guide page [40]. Declarations stop at the factory gate for these rows; logistics, use-phase and end-of-life emissions per m2 were not compiled, so no stage shares are given. Heat saved in use is under energy in use. One biomass-balance grey EPS declaration gives 16.22 kg CO2e per m3 at 15 kg/m3 (about 1.08 per kg, calculated), but it expired in April 2024 and uses another method [9].

#### End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Incineration with energy recovery (declared scenario, all waste) | 100 | Europe | 2024 | ^[1] |
| Incineration with energy recovery (declared scenario, grey EPS) | 100 | Germany | 2019 | ^[9] |
| Incineration in a waste plant (declared scenario, PU board) | 100 | Germany | 2021 | ^[7] |
| Landfill (declared scenario, XPS) | 100 | North America | 2021 | ^[2] |
| Landfill (declared scenario, XPS) | 100 | North America | 2019 | ^[4] |

as of 2026-11-17. Declared scenarios, not measured collection rates. No India figure found.

#### Recovered as

The commodities and chemicals recovered at end of life, with recovery rates
 Recovered as

- [PS Polystyrene and EPS](https://www.materialinsights.org/chemicals/polystyrene/) Recycling A plant in Terneuzen, the Netherlands, opened in 2021 to recycle 3,300 tonnes of EPS a year into insulation material, removing HBCD ^[32]. No recovery rate found.

as of 2026-11-17

#### End of life in India

Collection and recycling in India, including the informal sector

Declared end-of-life scenarios assume incineration with energy recovery for EPS and PU boards in Europe and landfill for XPS in North America ^[1]^[7]^[2]. Old EPS can contain the restricted flame retardant HBCD, which a Dutch plant removes while recycling up to 3,300 tonnes a year ^[31]^[32]. No Indian collection, recycling or extended producer responsibility figure for foam board was found in the sources opened.

as of 2026-11-17

#### Sources

1. [NEPD-6298-5556: EPS thermal insulation for buildings, 16, 24 and 30 kg/m3 (Tempra ehf.)](https://epd-global.com/getfile.php/1356635-1710838562/EPDer/Byggevarer/Isolasjon/NEPD-6298-5556_EPS-----Thermal-insulation-for-buildings--16-kg-m3--24-kg-m3-and-30-kg-m3.pdf) The Norwegian EPD Foundation, 2024
2. [Environmental product declaration: Styrofoam brand XPS products](https://polyglass.us/wp-content/uploads/2025/09/styrofoam-xps-environmental-product-declaration.pdf) DuPont de Nemours, UL Environment programme (copy held by Polyglass), 2021
3. [Redesigning insulation for improved sustainability, carbon footprint (Foamular NGX)](https://owenscorning.com/en-us/insulation/insulation-solutions-suite/article/redesigning-insulation) Owens Corning
4. [EPD Owens Corning Foamular XPS](https://www.stocorp.com/wp-content/content/Products_TechService/EPD/EPD/EPD_Owens_Corning_Foamular_XPS.pdf) Owens Corning, UL Environment programme (copy held by Sto Corp), 2019
5. [PIR insulation core with composite foil facing for pitched roofs (Kingspan Therma TP10, EPD-KIN-20230011-CBD2-EN)](https://materials.oneclicklca.com/en/material/pir-insulation-core-with-composite-foil-facing-for-pitched-roofs/655a506a09b13f00fa86e0a9) One Click LCA, quoting an IBU declaration by Kingspan Insulation, 2023
6. [IVPU 21-0007rev: PU thermal insulation boards with multi-layer aluminium facing](https://login.bachl.de/wMedia/docs/downloads/EPD/PUR-PIR/IVPU_21-0007rev_englisch_PU-thermal-insulation-boards-with-multi-layer-aluminium-facing.pdf) IVPU Industrieverband Polyurethan-Hartschaum e.V., Institut Bauen und Umwelt e.V., 2021
7. [Insulation board made of Neopor Plus BMB (EPD)](https://fepwaf20.basf.com/portal/load/fid1232395/Insulation%20board%20made%20of%20Neopor%20Plus%20BMB.pdf) BASF SE and Karl Bachl, Institut Bauen und Umwelt e.V., 2019
8. [Hexabromocyclododecane (HBCD): overview](https://www.pops.int/Implementation/IndustrialPOPs/HBCD/Overview/tabid/7410/Default.aspx) Stockholm Convention on Persistent Organic Pollutants
9. [Closing the loop: grand opening of PolyStyreneLoop's recycling plant](https://cinea.ec.europa.eu/news-events/news/closing-loop-grand-opening-polystyreneloops-recycling-plant-2021-07-07_en) CINEA, European Commission, 2021
10. [ICE database embodied carbon (summary of ICE v4.1 insulation values)](https://greencalculus.com/standards/ice-database-embodied-carbon/) Green Calculus, quoting Circular Ecology ICE database v4.1, 2026
11. [Heating and cooling degree days statistics](https://ec.europa.eu/eurostat/statistics-explained/SEPDF/cache/92378.pdf) Eurostat, Statistics Explained, 2024
12. [Solid-wall U-values: heat flux measurements compared with standard assumptions (Li et al., Building Research and Information 43(2))](https://www.ucl.ac.uk/bartlett/environmental-design/publications/2016/jan/solid-wall-u-values-heat-flux-measurements-compared-standard-assumptions) UCL Bartlett School of Environment, Energy and Resources, 2016

## Other sections

- [Summary](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/index.md)
- [Working](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-supply/index.md)
- [Evolution](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-interventions/index.md)
