# Plastic foam insulation board: Working

Source page: https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-working/

#### What it is

The product and the job it does, in a short paragraph

Plastic foam insulation board is a rigid panel of cellular plastic that slows heat flow through walls, roofs, floors and cold stores ^[35]^[7]. This file covers expanded polystyrene (EPS), extruded polystyrene (XPS) and polyisocyanurate or polyurethane (PIR and PUR) boards, traded as HS 3921.11 and 3921.13. Spray foam, appliance foam and packaging foam are left out. The functional unit is one square metre of board, 100 mm thick.

as of 2026-11-17

#### How it works

How it does its job, step by step in plain words

A board works by holding a great deal of gas in very little plastic, because still gas conducts heat poorly. EPS is about 98% air ^[35]. Makers expand polystyrene beads that carry pentane with steam, then mould them ^[1]^[36]. XPS melts polystyrene in an extruder, adds a blowing agent and pushes the mix through a die, where it foams ^[38]^[39]. PIR is made by continuous lamination, expanding between facings ^[38], from MDI, polyol and pentane ^[7]. Thermal resistance R is thickness divided by conductivity, so a lower conductivity gives the same R in a thinner board.

as of 2026-11-17

#### Key specifications

The numbers that describe it, each with unit, variant, year and source

| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Thermal conductivity (lambda), EPS | 0.036 | W/mK | EPS | 2024 | ^[1] |
| Thermal conductivity (lambda), XPS (calculated: 0.0276 m thickness for RSI 1 m2K/W) | 0.028 | W/mK | XPS | 2021 | ^[2] |
| Thermal conductivity (lambda), PIR | 0.022 | W/mK | PIR | 2023 | ^[6] |
| Density (16, 24 and 30 kg/m3 grades declared; 24 used) | 24 | kg/m3 | EPS | 2024 | ^[1] |
| Density (calculated: 0.744 kg per m2 in 0.0276 m) | 27 | kg/m3 | XPS | 2021 | ^[2] |
| Density | 30 | kg/m3 | PIR | 2023 | ^[6] |
| Compressive strength, minimum | 104 | kPa | XPS | 2025 | ^[5] |
| Water absorption, maximum | 0.3 | % by volume | XPS | 2025 | ^[5] |
| Maximum service temperature | 74 | degrees Celsius | XPS | 2025 | ^[5] |
| Reaction to fire with a flame retardant added | Euroclass E | class | EPS | – | ^[35] |

as of 2026-11-17. Thermal resistance of 100 mm is about 2.78 (EPS), 3.62 (XPS) and 4.55 (PIR) m2K/W (calculated: 0.100 m divided by lambda). Mass of 100 mm is about 2.4, 2.7 and 3.1 kg per m2 of foam (calculated). Other declarations give PIR at 0.023 W/mK and 31 to 32 kg/m3 [7] and grey graphite EPS at 0.030 to 0.032 W/mK [35][9]. The XPS data sheet is for Owens Corning's Foamular NGX sheathing [5].

#### Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

| Variant | Defining spec | Year | Source |
|---|---|---|---|
| EPS | Pentane-expanded polystyrene beads moulded with steam; about 94% polystyrene by mass in one declaration; 15 to 40 kg/m3 grades ^[1]^[35] | 2024 | ^[1]^[35] |
| XPS | Polystyrene melted, mixed with a blowing agent and extruded as a closed-cell board; about 27 kg/m3 and lambda 0.0276 W/mK in one declaration ^[2] | 2021 | ^[2] |
| PIR | Isocyanurate-modified polyurethane foamed between facings; lambda 0.022 W/mK at 30 kg/m3. PUR boards are counted here and differ by chemistry only ^[6]^[30] | 2023 | ^[6]^[30] |

as of 2026-11-17. No source gives shares of world or Indian sales by variant. HS 3921.11 covers styrene polymers (EPS, XPS) and HS 3921.13 polyurethanes (PUR, PIR).

#### Limits

The physical limits set by science and the engineering limits of today's design, with today's value

| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Best declared conductivity of a commercial rigid foam board (phenolic 0.021; PIR 0.022) | Engineering | – | 0.021 to 0.022 | W/mK | ^[11]^[6] |
| Maximum service temperature of XPS | Engineering | 74 | 74 | degrees Celsius | ^[5] |
| Operating temperature range of unfaced PIR bunstock for pipes and vessels (ASTM C591 grade 2): -297 to 300 degrees Fahrenheit (calculated: about -183 to 149 degrees Celsius) | Engineering | 149 | -183 to 149 | degrees Celsius | ^[30] |
| Reaction to fire class reachable by EPS with a flame retardant | Engineering | E | E | Euroclass | ^[35] |

as of 2026-11-17. No source gives a physical floor for foam board conductivity; the limits shown are set by today's polymers, cell gases and fire behaviour.

#### Science it relies on

The science principles it works by or is limited by
 Relies on

- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) Fourier's law sets heat flow as conductivity times temperature difference over thickness, so low-conductivity cells in a thick board cut it.
- [Macromolecules (polymer theory)](https://www.materialinsights.org/science/polymer_macromolecules/) Polystyrene and polyurethane chains form the thin, gas-tight cell walls of the foam.

as of 2026-11-17

#### Sources

1. [NEPD-6298-5556: EPS thermal insulation for buildings, 16, 24 and 30 kg/m3 (Tempra ehf.)](https://epd-global.com/getfile.php/1356635-1710838562/EPDer/Byggevarer/Isolasjon/NEPD-6298-5556_EPS-----Thermal-insulation-for-buildings--16-kg-m3--24-kg-m3-and-30-kg-m3.pdf) The Norwegian EPD Foundation, 2024
2. [Environmental product declaration: Styrofoam brand XPS products](https://polyglass.us/wp-content/uploads/2025/09/styrofoam-xps-environmental-product-declaration.pdf) DuPont de Nemours, UL Environment programme (copy held by Polyglass), 2021
3. [Product data sheet: FOAMULAR NGX insulating sheathing XPS insulation](https://dcpd6wotaa0mb.cloudfront.net/mdms/dms/EIS/23512/23512-Foamular-IS-XPS-Product-Data-Sheet.pdf) Owens Corning, 2025
4. [PIR insulation core with composite foil facing for pitched roofs (Kingspan Therma TP10, EPD-KIN-20230011-CBD2-EN)](https://materials.oneclicklca.com/en/material/pir-insulation-core-with-composite-foil-facing-for-pitched-roofs/655a506a09b13f00fa86e0a9) One Click LCA, quoting an IBU declaration by Kingspan Insulation, 2023
5. [IVPU 21-0007rev: PU thermal insulation boards with multi-layer aluminium facing](https://login.bachl.de/wMedia/docs/downloads/EPD/PUR-PIR/IVPU_21-0007rev_englisch_PU-thermal-insulation-boards-with-multi-layer-aluminium-facing.pdf) IVPU Industrieverband Polyurethan-Hartschaum e.V., Institut Bauen und Umwelt e.V., 2021
6. [Kooltherm K3 / Kooltherm K10 environmental product declaration](https://heinze.de/epd/pdf/kooltherm-k3/37beb0f7-d72f-4a59-a55c-4e0e1b579efe) Kingspan Insulation B.V., Institut Bauen und Umwelt e.V. (via Heinze), 2023
7. [Insulation Materials: Polyisocyanurates](https://insulation.org/io/?p=7165) Insulation Outlook, National Insulation Association, 2008
8. [Ten facts about Expanded Polystyrene (EPS) insulation to help specifiers (Styrene Packaging and Insulation Ltd)](https://www.designingbuildings.co.uk/wiki/Ten facts about Expanded Polystyrene (EPS) insulation to help specifiers) Designing Buildings, 2018
9. [Expanded Polystyrene (EPS): How to select the right grade?](https://www.specialchem.com/plastics/guide/expanded-polystyrene-eps-foam-insulation) SpecialChem, 2026
10. [Weighing the material options](https://www.constructioncanada.net/weighing-the-material-options/) Construction Canada, 2012
11. [Expanded polystyrene or EPS: production of extruded expanded polystyrene (EPS-E or XPS)](https://techniques-ingenieur.fr/en/resources/article/ti100/expanded-polystyrene-or-eps-am3341/v1/production-of-extruded-expanded-polystyrene-eps-e-or-xps-3) Techniques de l'Ingenieur, 2008

## Other sections

- [Summary](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/prod-interventions/index.md)
