# Precast concrete products: Working

Source page: https://www.materialinsights.org/products/p_precast_concrete_products/prod-working/

#### What it is

The product and the job it does, in a short paragraph

Precast concrete products are concrete parts cast in a factory, cured there and carried to site: blocks, paving, pipes, slabs, beams, wall panels and railway sleepers (HS 6810). The functional unit is one cubic metre of concrete, which weighs about 2.4 tonnes ^[9]^[8]. Three kinds are followed: unreinforced block or paver, reinforced element and prestressed element. Cast-in-place concrete, bricks and glass-fibre-reinforced concrete are left out.

as of 2026-11-16

#### How it works

How it does its job, step by step in plain words

A plant batches cement, sand, stone, water and admixtures (chemicals that change how fresh concrete flows and sets) into a mix. Steel moulds or long casting beds are cleaned and fitted with reinforcement: bars, welded mesh or, for prestressed parts, strand stretched tight before the pour. The mix is poured and compacted, and the part hardens in about 5 to 20 hours, depending on the mix and curing method ^[11]. The strand is then released so that it squeezes the concrete. The part is lifted out, finished, stored and trucked to site, where cranes set it in place and the joints are made. Factory control gives steadier quality and less waste than pouring on site ^[10].

as of 2026-11-16

#### Key specifications

The numbers that describe it, each with unit, variant, year and source

| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Typical density of concrete | 2400 | kg per m3 | – | – | ^[9] |
| Density range of normal-strength concrete | 2240 to 2400 | kg per m3 | – | – | ^[8] |
| Density of a concrete paver (Tasmania) | 2150 | kg per m3 | Unreinforced block or paver | 2024 | ^[5] |
| Normal-weight concrete masonry unit, minimum density class | 125 | lb per ft3 (pcf) | Unreinforced block or paver | 2024 | ^[4] |
| Hardening time before a part can be moved | 5 to 20 | hours | – | – | ^[11] |
| Prestressing tendon in hollow-core slab (Finland) | 10 | kg per m3 | Prestressed element | – | ^[9] |
| Concrete saved by a hollow-core slab against a cast-in-situ slab (supplier claim) | up to 45 | % | Prestressed element | – | ^[10] |
| Reference mass of a 2.5 m length of 1200 mm reinforced pipe | 3550 | kg | Reinforced element | 2023 | ^[6] |
| Plant energy to make a hollow-core slab, cradle to gate (A1 to A3) | 454 | kWh per tonne | Prestressed element | 2024 | ^[2] |
| Plant energy to make a concrete pipe, cradle to gate (A1 to A3) | 284 | kWh per tonne | Reinforced element | 2024 | ^[3] |

as of 2026-11-16

#### Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

| Variant | Defining spec | Year | Source |
|---|---|---|---|
| Unreinforced block or paver | Plain concrete with no steel: about 92% aggregate and 8% cement by mass in a normal-weight block ^[4]; density about 2150 kg per m3 for a paver ^[5] | 2024 | ^[4]^[5] |
| Reinforced element | Beams, columns, panels, pipes and slabs with steel bar or mesh; the industry average carries about 43 kg of steel per tonne, 103 kg per m3 (calculated) ^[1] | 2018 | ^[1] |
| Prestressed element | Hollow-core slabs, sleepers and girders with strand stretched before casting; about 10 kg of tendon per m3 in a Finnish hollow-core slab ^[9] | – | ^[9] |

as of 2026-11-16. No source gives the share of precast output by variant. A market report puts structural building components at 37.3% of 2025 revenue [20].

#### Limits

The physical limits set by science and the engineering limits of today's design, with today's value

| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Concrete cracks when pulled, so tension must be carried by steel or by prestress | Physical | – | – | no single value; strand is 13.8 kg per tonne in the US industry average | ^[1] |
| Cement must hydrate to harden, which sets the wait before a part can be moved | Physical | – | 5 to 20 | hours to harden | ^[11] |
| Cement share of a precast mix, kept low by design (less than 20% of a typical panel) | Engineering | 20 | 15.5 | % of mass (today calculated: 159.2 kg of Portland and Portland limestone cement in 1,028 kg of listed inputs per tonne) | ^[15]^[1] |
| Delivery distance from plant to site, as heavy parts travel by truck | Engineering | – | 95 | km UK average for precast, against 11 km for ready-mix (Mineral Products Association figures) | ^[30] |

as of 2026-11-16

#### Science it relies on

The science principles it works by or is limited by
 Relies on

- [Hydraulic setting of lime and cement](https://www.materialinsights.org/science/hydraulic_setting/) Cement reacts with water and hardens, in the mould and then for years.
- [Beam theory](https://www.materialinsights.org/science/beam_theory/) Beams, slabs and sleepers carry load by bending; steel sits where the part is stretched.
 Limited by

- [Fracture mechanics](https://www.materialinsights.org/science/fracture_mechanics/) Plain concrete cracks under tension, which is why steel or prestress is added.

as of 2026-11-16

#### Sources

1. [Environmental Product Declaration: Structural Precast Concrete, industry-wide (ASTM declaration EPD-117)](https://www.astm.org/v3/assets/blt5eb0a2cb04534832/blta671a3467de55af5/697b2372d69bf2389a8a4a48/463.EPD_for_Structural_Precast_Concrete_Industry_Wide_EPD.pdf) ASTM International EPD programme, 2019
2. [EPD Hub declaration 4903: Precast hollow core slab (Steypustodin, Iceland)](https://steypustodin.is/wp-content/uploads/2021/05/EPD_HUB-4903_2026-01-20_en.pdf) EPD Hub, 2026
3. [EPD Hub declaration 4990: Concrete pipes with and without reinforcement (Benders, Sweden)](https://benders.se/globalassets/start/hallbarhet/hallbarhet-dokument/epd/epd-hub-4990-betongror-armerade-och-oarmerade-concrete-pipes-with-and-without-reinforcement.pdf) EPD Hub, 2026
4. [Environmental Product Declaration for Concrete Masonry Units as manufactured by members of the Concrete Masonry & Hardscapes Association (ASTM declaration EPD-766)](https://www.astm.org/v3/assets/blt5eb0a2cb04534832/blt4559e6cca3c9394c/697b1fbe843e683ab92eaefb/1209.EPD_CMHA_v5.pdf) ASTM International EPD programme, 2024
5. [EPD: Sustainable Bricks, Blocks, Pavers & Freestone ECO Retaining Walls (Island Block & Paving, Tasmania)](https://globalgreentag.com/certificate/2812/240709_Island+Block+Paving_EPD_v8.pdf) Global GreenTag, 2024
6. [EPD Hub declaration HUB-0555: Concrete pipes, reinforced (Marshalls, UK)](https://www.marshalls.co.uk/media/twclr20q/epd-marshalls-concrete-pipes-reinforced.pdf) EPD Hub (copy on the Marshalls site), 2023
7. [Concrete properties](https://engineeringtoolbox.com/concrete-properties-d_1223.html) Engineering ToolBox, 2008
8. [Average quantities of reinforcement in concrete](https://help.oneclicklca.com/en/articles/275888) One Click LCA, 2025
9. [Reducing concrete production's carbon footprint with precast solutions, towards net zero](https://www.elematic.com/concrete-issues/reducing-concrete-productions-carbon-footprint-with-precast-solutions-towards-net-zero/) Elematic, 2025
10. [The ABCs of concrete production](https://www.elematic.com/concrete-issues/the-abcs-of-concrete-production/) Elematic, 2025
11. [Comparative life-cycle assessment of precast concrete commercial buildings (LCA white paper)](https://www.pci.org/PCI_Docs/Design_Resources/Sustainability/LCA-White-Paper.pdf) Precast/Prestressed Concrete Institute
12. [Concrete embodied carbon footprint calculator](https://circularecology.com/?p=1933) Circular Ecology

## Other sections

- [Summary](https://www.materialinsights.org/products/p_precast_concrete_products/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_precast_concrete_products/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_precast_concrete_products/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_precast_concrete_products/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_precast_concrete_products/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_precast_concrete_products/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_precast_concrete_products/prod-interventions/index.md)
