# Printed circuit board: Bill of materials

Source page: https://www.materialinsights.org/products/p_printed_circuit_board/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

Per square metre of a four-layer FR-4 board, a 2021 life cycle inventory lists 2.87 kg of copper, 1.21 kg of copper foil, 1.89 kg of glass fibre and 0.14 kg of phenolic resin as inputs ^[6]; much of the copper is etched away. Scrap boards in recycling studies are typically 40% metals, 30% organics and 30% ceramics ^[7]. Glass fibre fabric, copper foil and copper clad laminate are not yet nodes.

as of 2026-11-15

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant **Rigid**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [Cu Copper](https://www.materialinsights.org/commodities/copper/) | Functional | 2.87 kgrange 2.87 to 4.08 kg | – |
| Copper used to make one m2 of four-layer FR-4 board in the 2021 inventory; the same table lists 1.21 kg of copper foil separately, so the upper figure (calculated) adds it. Much of this copper is etched away, so the finished board holds less ^[6]. |  |  |  |
| [HCl Hydrochloric acid](https://www.materialinsights.org/chemicals/hydrochloric_acid/) | Consumable | 2.49 kg | – |
| Etching chemical per m2 in the 2021 inventory ^[6]. |  |  |  |
| [H2O2 Hydrogen peroxide](https://www.materialinsights.org/chemicals/hydrogen_peroxide/) | Consumable | 1.46 kg | – |
| Etching chemical per m2 in the 2021 inventory ^[6]. |  |  |  |
| [H2SO4 Sulphuric acid](https://www.materialinsights.org/chemicals/sulphuric_acid/) | Consumable | 0.99 kg | – |
| Process chemical per m2 ^[6]; 0.86 kg of iron(III) chloride is also used ^[6]. |  |  |  |
| [EPX Epoxy resins](https://www.materialinsights.org/chemicals/epoxy/) | Structural | Not given | – |
| FR-4 is epoxy resin, woven glass fibre and copper foil ^[6], and the resin is typically bromine-filled ^[18]; the 2021 inventory lists only 0.14 kg of phenolic resin and gives no epoxy mass ^[6]. |  |  |  |
| [Sn Tin](https://www.materialinsights.org/commodities/tin/) | Functional | Not given | – |
| Surface finish and solder: traditionally tin-lead ^[19]; no bare-board mass found. |  |  |  |
| [Ni Nickel](https://www.materialinsights.org/commodities/nickel/) | Functional | Not given | – |
| Layer under gold in the electroless nickel immersion gold (ENIG) finish ^[19]; no mass found. |  |  |  |
| [Au Gold](https://www.materialinsights.org/commodities/gold/) | Functional | Not given | – |
| Thin gold coating in ENIG and direct gold finishes ^[19]; no mass found. |  |  |  |

as of 2026-11-15

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Make the laminate | Woven glass cloth is bonded with flame-retardant epoxy and copper foil into a copper clad sheet. | – | ^[18]^[6] |
| Etch the circuit | Copper is etched away with acids, hydrogen peroxide and iron(III) chloride, leaving the tracks. | – | ^[6] |
| Stack the layers | Etched layers are separated by insulating substrate to build a multilayer board. | – | ^[19] |
| Drill and plate holes | Holes are drilled through the stack and their walls are plated with copper to join layers. | Electroplating | ^[19] |
| Apply solder mask | A polymer solder resist covers areas that must not be soldered. | – | ^[19] |
| Apply surface finish | Exposed pads get a finish such as organic coating, immersion silver, ENIG or gold, since bare copper oxidises quickly. | – | ^[19] |

as of 2026-11-15

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [Ep Electroplating](https://www.materialinsights.org/technologies/electroplating/) Plating the walls of drilled holes with copper Hole walls are plated with copper to form plated-through holes that join the layers ^[19].

as of 2026-11-15

#### Sources

1. [Alternative Materials for Printed Circuit Board Production: An Environmental Perspective](https://mdpi.com/2071-1050/13/21/12126) Sustainability (MDPI), Nassajfar, Deviatkin, Leminen and Horttanainen, 2021
2. [Recycling of Printed Circuit Boards (Integrated Waste Management, Volume II)](https://core.ac.uk/download/322397467.pdf) InTech, Maria Paola Luda (in Integrated Waste Management, Volume II), 2011
3. [FR4 PCB Deep Guide: Material Truth, Real Specs and When to Use (or Avoid) It](https://jlcpcb.com/blog/fr4-pcb-guide-material-specs-usage-tips) JLCPCB, 2025
4. [Printed circuit board](https://www.newworldencyclopedia.org/entry/Printed_circuit_board) New World Encyclopedia

## Other sections

- [Summary](https://www.materialinsights.org/products/p_printed_circuit_board/index.md)
- [Working](https://www.materialinsights.org/products/p_printed_circuit_board/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_printed_circuit_board/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_printed_circuit_board/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_printed_circuit_board/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_printed_circuit_board/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_printed_circuit_board/prod-interventions/index.md)
