# Printed circuit board: Interventions

Source page: https://www.materialinsights.org/products/p_printed_circuit_board/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Substitute | Components design | Use a soluble or bio-based substrate instead of FR-4 | 17.7 to 7.1 kg CO2e per m2, 60% lower (Soluboard, ERM 2020) ^[9]; PLA and PBAT about 4 against about 20 kg CO2e per kg for FR-4 and polyimide ^[8] | Piloted: a marketed soluble board; bio-based substrates in life cycle study | Not found | Board makers, device brands | ^[9]^[8] |
| Change route | Making | Print silver ink on PET, PLA or paper instead of etching copper from FR-4 | Climate impact can fall to 14% of the conventional method in the 2021 study (four-layer board, with 50% of the silver assumed recycled) ^[6] | Research | Not found | Board makers, researchers | ^[6] |
| Efficiency | Making | Halve process electricity (10 against 20 kWh per m2) with an additive silver route on FR-4 | Climate impact 49% lower than the etched baseline ^[6] | Research | Not found | Board makers | ^[6] |
| Efficiency | Making | Buy cleaner electricity for board plants | Electricity generation is 41% of a four-layer board's climate impact ^[6] | Deployed in general; board-specific adoption not found | Not found | Board makers, grid operators | ^[6] |
| Design | Components design | Use fewer layers and a smaller board area | A bottom-up IoT study suggests scaling a board's footprint by area times number of layers, so footprint falls roughly in proportion ^[26] | Deployed (design choice) | Not found | Device designers | ^[26] |
| Circularity | End of life | Collect scrap boards and recover copper and precious metals | A pyrometallurgical process recovered 68.4% of copper, 92.6% of silver and 85.5% of gold; a hydrometallurgical flowsheet recovered 95% of gold and 99% of palladium ^[7] | Deployed for precious metals in smelters; routes for the resin and glass are at research stage | 22.3% of e-waste documented as collected and recycled, 2022 ^[15] | Recyclers, device brands, regulators (India EPR) | ^[7]^[15] |
| Business model | End of life | Refurbish devices so their boards stay in use | Not quantified per board; India's 72 registered refurbishers added about 92,042 tonnes a year of capacity ^[16] | Deployed | Not found per board | Refurbishers, device brands | ^[16] |

as of 2026-11-15

#### Sources

1. [Alternative Materials for Printed Circuit Board Production: An Environmental Perspective](https://mdpi.com/2071-1050/13/21/12126) Sustainability (MDPI), Nassajfar, Deviatkin, Leminen and Horttanainen, 2021
2. [Recycling of Printed Circuit Boards (Integrated Waste Management, Volume II)](https://core.ac.uk/download/322397467.pdf) InTech, Maria Paola Luda (in Integrated Waste Management, Volume II), 2011
3. [Beyond FR-4: a comparative life cycle assessment of traditional and green PCB substrates](https://researchinnovation.kingston.ac.uk/en/publications/beyond-fr-4-a-comparative-life-cycle-assessment-of-traditional-an/) Engineering Proceedings (MDPI), Moupali Chakraborty; Kingston University repository page, 2026
4. [ReCollect: Efficient Manufacturing of Recyclable Composite Laminates for Electrical Goods (webinar slides)](https://instct.org/images/stories/journal/vol_13/vol_13_3/ICT/201119_ReCollect_ICT_Autumn_Webinar_Slides.pdf) Jiva Materials Ltd, hosted by the Institute of Circuit Technology (carbon figures from Environmental Resources Management, 2020), 2020
5. [Global e-Waste Monitor 2024: Electronic Waste Rising Five Times Faster than Documented E-waste Recycling](https://unitar.org/about/news-stories/press/global-e-waste-monitor-2024-electronic-waste-rising-five-times-faster-documented-e-waste-recycling) UNITAR, 2024
6. [E-Waste (Management) Rules (2022): Assessing India's Extended Producer Responsibility Framework](https://www.impriindia.com/insights/policy-update/e-waste-management-rules-2022-assessing-indias-extended-producer-responsibility-framework/) IMPRI India (Sudeepti Joshi), 2026
7. [Assessing the embodied carbon footprint of IoT edge devices with a bottom-up life-cycle approach](https://arxiv.org/pdf/2105.02082) arXiv, Pirson and Bol, 2021

## Other sections

- [Summary](https://www.materialinsights.org/products/p_printed_circuit_board/index.md)
- [Working](https://www.materialinsights.org/products/p_printed_circuit_board/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_printed_circuit_board/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_printed_circuit_board/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_printed_circuit_board/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_printed_circuit_board/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_printed_circuit_board/prod-evolution/index.md)
