# Rolling bearing: Bill of materials

Source page: https://www.materialinsights.org/products/p_rolling_bearing/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

The materials describe a deep groove ball bearing of the reference 6010 type: 100Cr6 rings and balls, a cage of pressed steel (as in the 6010C4), brass or polyamide, grease, and in sealed types acrylonitrile-butadiene rubber (NBR) seals with a steel insert. Large pitch bearings have 42CrMo4-type rings and 100Cr6 rolling bodies. Hybrid bearings use silicon nitride balls. The mass split between parts was not found. NBR, a plain bearing and a bearing steel bar are not yet nodes. ^[8]^[14]^[17]^[46]^[15]

as of 2026-11-15

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
 Variant 1 **Ball**

| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Structural | up to 0.261 kga range, no single figure | – | 51% |
| Rings are 100Cr6 bearing steel, about 1% carbon and 1.5% chromium ^[14]; the 6010C4 reference also has a pressed steel cage ^[8]. The upper figure is the whole mass of the 6010 ^[8]; the split between steel, seals and grease was not found. 51% is SKF's estimated group share of bearing steel from scrap-based sources in 2025 ^[3]. |  |  |  |  |
| [Cr Chromium](https://www.materialinsights.org/commodities/chromium/) | Functional | Not given | – | – |
| About 1.5% of the ring steel by weight ^[14]; this chromium is inside the steel above, not extra mass. |  |  |  |  |
| [PA Nylon (PA6, PA66)](https://www.materialinsights.org/chemicals/nylon/) | Structural | Not given | – | – |
| Polyamide 66 or 46 cages are one option ^[14]; a cage is typically under 10% of a rolling bearing's weight ^[16]. The 6010C4 reference has a pressed steel cage, so no polyamide ^[8]. |  |  |  |  |
| [Cu Copper](https://www.materialinsights.org/commodities/copper/) | Functional | Not given | – | – |
| Machined cages are made of brass (copper and zinc) or sometimes steel or light alloy ^[14]. The share of bearings with brass cages was not found. |  |  |  |  |
| [Zn Zinc](https://www.materialinsights.org/commodities/zinc/) | Functional | Not given | – | – |
| In brass cages, as for copper ^[14]. |  |  |  |  |
| [Lub Lubricant additives](https://www.materialinsights.org/chemicals/lubricant_additives/) | Consumable | Not given | – | – |
| Grease, filled at the factory; in one SKF wheel bearing study grease was under 1% of the carbon footprint ^[36]. |  |  |  |  |

 Variant 2 **Large**

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [St Steel](https://www.materialinsights.org/commodities/steel/) | Structural | Not given | – |
| Rings of large pitch bearings are usually 42CrMo4-type steel, with 100Cr6 rolling bodies ^[46]. No mass was found. |  |  |  |

as of 2026-11-15

#### How it is put together

The main steps from parts and materials to the finished unit

| Step | What happens | Technology | Source |
|---|---|---|---|
| Shape the rings | Rings start as tube stock; the blanks may be forged or turned to shape. | Lathe | ^[19]^[20] |
| Form the balls | Wire slugs are cold-headed to a near-round shape, deburred and soft ground. | – | ^[19] |
| Harden | Rings are heated to about 850 C (1565 F in the source) for 15 to 20 minutes, quenched in oil and tempered; balls are hardened in a similar way. | – | ^[19] |
| Grind and finish | Faces, bores and races are ground and the races honed; balls are finish ground and lapped to final size and roundness. | – | ^[19] |
| Assemble | Balls, cage and any seals or shields are fitted into the rings. | – | ^[20] |
| Lubricate | Bearings are lubricated with grease or oil; bearings sealed or shielded on both sides are filled with grease at the factory. | – | ^[20]^[14] |

as of 2026-11-15

#### Technologies used to make it

The technologies used to make it, at which step
 Made with

- [Lth Lathe](https://www.materialinsights.org/technologies/lathe/) Turning ring blanks to shape Blanks are forged or turned before grinding ^[20]; the share made this way was not found.

as of 2026-11-15

#### Sources

1. [SKF Annual Report 2025](https://www.skf.com/financial-reports-service/download/2242/report/Annual%20Report%202025) AB SKF, 2026
2. [NSK 6010C4 deep groove ball bearing data page](https://www.nsk.com/engineering/6010c4-apn.html) NSK Ltd, 2026
3. [Components and materials of SKF bearings](https://coolenbearings.com/skf/tech/components-and-materials-skf-bearings) Coolen Bearings (reproducing SKF technical text)
4. [A guide to material selection for rolling bearings](https://br.bearing-news.com/?p=1444) Bearing News, 2013
5. [Sustainable thinking from scratch](https://schaeffler-tomorrow.com/en/article/sustainable-thinking-from-scratch) Schaeffler tomorrow
6. [Longer life and lower energy use with SKF Sealed Energy Efficient deep groove ball bearings](https://cdn.skfmediahub.skf.com/api/public/0901d1968037e114/pdf_preview_medium/0901d1968037e114_pdf_preview_medium.pdf) SKF Evolution, 2014
7. [How ball bearings are manufactured](https://insights.globalspec.com/article/4523/how-ball-bearings-are-manufactured) GlobalSpec Insights
8. [Bearing manufacturing process: a comprehensive guide to precision and innovation](https://www.nbcbearings.com/bearing-manufacturing-process-a-comprehensive-guide-to-precision-and-innovation/) NBC Bearings, 2024
9. [Sustainability and grease lubrication in rolling bearings](https://digitaleditions.walsworth.com/publication/?i=805180&article_id=4660986&view=articleBrowser) Berens and Lugt, Tribology and Lubrication Technology (STLE), 2023
10. [Life Cycle Assessment of Large Structure Mechanical Endurance Tests: Identifying Hotspots and Reduction Potentials (MA thesis)](https://reposit.haw-hamburg.de/bitstream/20.500.12738/15828/1/MA_Life%20Cycle%20Assessment.pdf) Hamburg University of Applied Sciences / Fraunhofer IWES, 2024

## Other sections

- [Summary](https://www.materialinsights.org/products/p_rolling_bearing/index.md)
- [Working](https://www.materialinsights.org/products/p_rolling_bearing/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_rolling_bearing/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_rolling_bearing/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_rolling_bearing/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_rolling_bearing/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_rolling_bearing/prod-interventions/index.md)
