# Spectacles and lenses: Interventions

Source page: https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Design | Components design | Use thinner, lighter semi-finished lens blanks | ZEISS says its own redesigned semi-finished lenses are up to 65% thinner and often weigh less than half as much; no emissions saving is stated | Deployed | Not found | Lens makers | ^[15] |
| Substitute | Components design | Use recycled plastics in frames and packaging | Bollé Safety's SWIFT has temples of 60% recycled polycarbonate and a 100% recycled HDPE bag, in a total of 0.1774 kg CO2e per pair; the effect of the recycled content alone is not stated | Deployed | Not found | Frame makers | ^[7] |
| Change route | Making | Run lens injection and coating on renewable electricity | In one maker's SWIFT study manufacturing is 0.000292 of 0.1774 kg CO2e (0.16%, calculated) and raw materials 0.163 kg (92%, calculated), so materials, not factory energy, drive the footprint of that pair | Deployed | Used for the SWIFT lens and temples; ZEISS says it uses 100% green energy, without saying for which sites | Lens and frame makers | ^[7]^[15] |
| Efficiency | Making | Cut energy and water use in lens plants | ZEISS reports CO2 emissions down 68%, energy use down 34% and water use down 55% for the whole ZEISS Group since 2018/19, relative to value added (company claim, group-wide, not per pair) | Deployed | One maker | Lens makers | ^[15] |
| Circularity | End of life | Recycle spent lenses instead of landfilling or burning them | Lenses carry up to 32.40 MJ/kg of energy content and are likely to remain solid waste in landfills; the study's authors call lens recycling the ideal route | Research | Not found | Lens makers, opticians, waste operators | ^[9] |

as of 2026-11-13

#### Sources

1. [SWIFT: Life-Cycle Assessment, Results](https://res.cloudinary.com/dahlzxcv/image/upload/v1752474876/akeneo-assets/epd_bolle-safety-swift.pdf) Bollé Safety (maker's own result, analysis by UTOPIES and Gingko 21), 2024
2. [Environmental impact and end-of-life options of disposed polymeric spectacle and contact lenses](https://avehjournal.org/index.php/aveh/article/view/775) African Vision and Eye Health (Pillay, Hansraj, Rampersad and Bissessur), 2023
3. [Sustainability in Eyeglass Lens Production](https://www.zeiss.com/vision-care/en/newsroom/news/articles-and-stories/sustainability-in-eyeglass-lens-production.html) ZEISS Vision Care (programme "Green, Safe, Responsible"), 2026

## Other sections

- [Summary](https://www.materialinsights.org/products/p_spectacles_and_lenses/index.md)
- [Working](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_spectacles_and_lenses/prod-evolution/index.md)
