# Steel reinforcing bar

The ribbed steel bar set inside concrete to carry tension.

Source page: https://www.materialinsights.org/products/p_steel_reinforcing_bar/

Buildings and construction · No. 90

- Second industrial revolution
 Buildings and construction · Product

Rebar melted from scrap emits about 650 kg CO2e a tonne; made from iron ore in India, 2,730 kg: about four times as much.

Chart: Illustration: Steel reinforcing bar

##### Where it comes from

Chart: Map of where it comes from

Before 1884 builders used smooth round rods, which slipped in concrete. Ernest Ransome twisted square rods into spiral ridges to grip it. Diamond and corrugated bars followed in 1906 and 1911, and ribbed bar became the norm.

##### Three things to know

1. Rebar made from scrap in a US electric arc furnace carried 652 kg CO2e a tonne, while Tata Steel's blast furnace rebar carried 2,730 kg.
2. About 70% of India's rebar comes from small producers using electric and induction furnaces, and about 30% from integrated steel plants.
3. Rebar to IS 1786 of 8 mm and above must carry the BIS Standard Mark under licence; the Steel and Steel Products (Quality Control) Order, 2024 replaced the 2020 order and kept this rule.

##### The journey

1. 1 **Iron or scrap**Iron ore, coking coal and limestone in a blast furnace, or scrap and sponge iron for an electric furnace
2. 2 **Steelmaking**Oxygen, arc or induction furnace melts and refines the steel; manganese, silicon and microalloys are added
3. 3 **Billet and rolling**Steel is cast to billets, reheated and rolled into a bar with ribs
4. 4 **TMT cooling**Water quench hardens the surface; the core heat tempers it
5. 5 **Use in concrete**Cut, bent and tied into cages in beams, slabs, columns and foundations
6. 6 **End of life**Recovered as scrap from demolition and melted again

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_steel_reinforcing_bar) Switch on levers and see what changes in India by 2036.
 Covered in [What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineering](https://www.materialinsights.org/learn/engineering/what-engineers-do/)[Structures and materials: stress, stiffness, strength and why things breakEngineering](https://www.materialinsights.org/learn/engineering/structures-and-materials/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-interventions/index.md)
