# Steel reinforcing bar: Footprint

Source page: https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-footprint/

#### Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

| Variant | Material | Amount (kg) | Emission factor (kg CO2e per kg) | Emissions (kg CO2e) |
|---|---|---|---|---|
| Blast | Iron ore | 1452 | – | – |
| Blast | Coking coal | 830 | – | – |
| Blast | Crushed stone | 311 | – | – |
| Blast | Steel | 124 | 1.92 | 238.1 |
| Scrap | Steel | 913 | 1.92 | 1753 |
| Scrap | Crushed stone | 66.4 | – | – |
| Scrap | Coking coal | 16.6 | – | – |

Worked out from data

#### The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| Blast | Making | World | 2085 | 5% |
| Blast | Use | World | – | – |
| Blast | Making | India | 2122 | 5% |
| Blast | Use | India | – | – |
| Scrap | Making | World | 1753 | 92% |
| Scrap | Use | World | – | – |
| Scrap | Making | India | 1753 | 92% |
| Scrap | Use | India | – | – |
| DRI | Making | World | 1543 | – |
| DRI | Use | World | – | – |
| DRI | Making | India | 1701 | – |
| DRI | Use | India | – | – |

Worked out from data

#### Energy to make it

Energy used to make one unit, by carrier and stage
 Energy to make 4

- [Ht Heat](https://www.materialinsights.org/energy/heat/) 25,200 MJ · Manufacturing Blast furnace Specific energy consumption of Indian BF-BOF TMT rebar, 25.20 GJ per tonne, all carriers (RMI Exhibit 14, 2024 values); converted to MJ (calculated) ^[7]. Tata Steel's EPD gives 26,500 MJ of non-renewable primary energy (energy carriers) cradle to gate ^[6]
- [El Electricity](https://www.materialinsights.org/energy/electricity/) 174 kWh · Manufacturing Blast furnace Oxygen furnace route electricity per tonne of steel, already within the 25.20 GJ ^[7]
- [Ht Heat](https://www.materialinsights.org/energy/heat/) 17,130 MJ · Manufacturing DRI electric furnace Coal-based DRI-EAF/IF TMT, 17.13 GJ per tonne in 2024, all carriers (calculated conversion) ^[7]; gas-based DRI is 9.91 GJ ^[7]
- [El Electricity](https://www.materialinsights.org/energy/electricity/) 745 kWh · Manufacturing DRI electric furnace Midpoint of 664 to 825 kWh per tonne of steel for electric furnace routes (calculated) ^[7]

Indicative · as of 2026-11-16. Heat rows are total specific energy including the electricity row, so the two rows overlap. Energy for scrap-only arc furnaces was not found in an opened source.

#### Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

| Stage | Value | Range | Unit | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|---|
| Making | 2730 | – | kg CO2e per tonne of rebar (A1 to A3, Tata Steel EPD: A1 2,520, A2 2.16, A3 205) | Blast furnace | India | 2021 | ^[6] |
| Making | 2850 | 2700 to 3000 kg CO2e per tonne of TMT rebar (RMI range of 2.7 to 3.0 t; midpoint calculated) | kg CO2e per tonne of TMT rebar (RMI range of 2.7 to 3.0 t; midpoint calculated) | Blast furnace | India | 2025 | ^[7] |
| Making | 652 | – | kg CO2e per tonne of fabricated rebar (A1 to A3, CMC Sayreville EPD: A1 613, A2 23.6, A3 15.3) | Scrap electric arc | United States of America | 2014 | ^[4] |
| Making | 854 | – | kg CO2e per tonne of fabricated rebar (A1 to A3, CRSI industry EPD: A1 778, A2 49, A3 27) | Scrap electric arc | United States of America | 2020 | ^[3] |
| Making | 1930 | – | kg CO2e per tonne of rebar (A1 to A3, Ezz Steel EPD: A1 1,050, A2 127, A3 757) | DRI electric furnace | Egypt | 2024 | ^[5] |
| Making | 1900 | 1800 to 2000 kg CO2e per tonne of TMT rebar, electric furnace routes (RMI range 1.8 to 2.0 t; midpoint calculated) | kg CO2e per tonne of TMT rebar, electric furnace routes (RMI range 1.8 to 2.0 t; midpoint calculated) | DRI electric furnace | India | 2025 | ^[7] |
| Making | 2320 | – | kg CO2 per tonne of crude steel, world average (not rebar; cross-check) | Blast furnace | World | 2023 | ^[1] |
| Making | 1430 | – | kg CO2 per tonne of crude steel, world average (not rebar; cross-check) | DRI electric furnace | World | 2023 | ^[1] |
| Making | 700 | – | kg CO2 per tonne of crude steel, world average (not rebar; cross-check) | Scrap electric arc | World | 2023 | ^[1] |
| Logistics | 2.16 | – | kg CO2e per tonne (module A2: inbound transport of raw materials only; delivery to site not included) | Blast furnace | India | 2021 | ^[6] |
| Logistics | 23.6 | – | kg CO2e per tonne (module A2: inbound transport only) | Scrap electric arc | United States of America | 2014 | ^[4] |
| Logistics | 127 | – | kg CO2e per tonne (module A2: inbound transport only) | DRI electric furnace | Egypt | 2024 | ^[5] |

as of 2026-11-16. Making figures are EPD cradle-to-gate results for different years and countries, so the gap between routes mixes route and grid. No opened source gives use-stage emissions (a buried bar uses no energy) or end-of-life emissions per tonne, so those stages are left out.

#### End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Recycling credit applied over 85% of the steel in Tata Steel's rebar EPD | 85 | India | 2022 | ^[6] |
| Global steel recycling rate, low end of 'around 80 to 90%' | 80 | World | 2020 | ^[15] |
| Global steel recycling rate, high end of 'around 80 to 90%' | 90 | World | 2020 | ^[15] |

as of 2026-11-16

#### Recovered as

The commodities and chemicals recovered at end of life, with recovery rates
 Recovered as

- [St Steel](https://www.materialinsights.org/commodities/steel/) 85% recovered · Recycling: melted again in an electric furnace Tata Steel's EPD assumes 85% of the steel is recycled at end of life and counts 850 kg per tonne as material for recycling ^[6]. Each tonne of scrap used saves about 1.1 t of iron ore, 630 kg of coking coal and 55 kg of limestone ^[7]

as of 2026-11-16

#### End of life in India

Collection and recycling in India, including the informal sector

Rebar leaves service when a building is demolished, after 30 to 50 years for steel products in India ^[7]. It is recovered as scrap and is readily recycled ^[16, 1]. India's domestic scrap generation was about 25 Mt in FY24, with 9 Mt imported, and the informal workforce handles over 50% of urban scrap recovery ^[7]. No opened source gives a recovery rate for rebar alone.

as of 2026-11-16

#### Water and waste

Water use and waste per unit where a source gives them

| Measure | Value | Unit | Stage | Year | Source |
|---|---|---|---|---|---|
| Net fresh water use, blast furnace route (A1 2.80 + A2 0.0074 + A3 0.739 m3, calculated) | 3.55 | m3 per tonne | Making | 2021 | ^[6] |
| Net fresh water use, scrap electric arc (CMC Sayreville) | 2.79 | m3 per tonne | Making | 2014 | ^[4] |
| Net fresh water use, scrap electric arc (CRSI industry EPD) | 8.42 | m3 per tonne | Making | 2020 | ^[3] |

as of 2026-11-16

#### Sources

1. [World Steel in Figures 2025](https://worldsteel.org/wp-content/uploads/World-Steel-in-Figures-2025.pdf) World Steel Association, 2025
2. [Environmental Product Declaration: fabricated steel reinforcing bar (CRSI industry-wide EPD)](https://www.astm.org/v3/assets/blt5eb0a2cb04534832/blt4900ac0ff22764a2/697b1fc25e3544dd57d83a3d/362.EPD_for_CRSI_EPD_FINAL_2017-08-28.pdf) Concrete Reinforcing Steel Institute; ASTM International programme operator, 2022
3. [Environmental Product Declaration of Fabricated Concrete Reinforcing Steel, CMC Sayreville (SCS-EPD-05357)](https://www.cmc.com/getmedia/b3cab38d-7276-4499-9f35-593d4dbdbe5f/SCS-EPD-05357_CMC_Sayreville-Rebar_20211203.pdf) SCS Global Services, for Commercial Metals Company, 2016
4. [EPD 0038: carbon steel reinforcing bars, DRI route (Ezz Steel)](https://www.ezzsteel.com/downloads/821/EZZ%20STEEL%20SUEZ%20CARES%20EPD%200038%20-%20REBAR.pdf) CARES, 2025
5. [EPD S-P-05018: Steel Rebar, Tata Steel Limited](https://api.environdec.com/api/v1/EPDLibrary/Files/7ee2c00f-0b06-4767-aba8-08da599e304a/Data) International EPD System, 2022
6. [The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment](https://www.bmtpc.org/DataFiles/CMS/file/PDF_Files/BMTPC_RMI_steel_rebar_w.pdf) RMI India Foundation with BMTPC and Lodha Foundation, 2025
7. [Iron and Steel Technology Roadmap](https://www.iea.org/reports/iron-and-steel-technology-roadmap) International Energy Agency, 2020
8. [Green Attributes of Rebar](https://www.crsi.org/green-attributes-of-rebar/) Concrete Reinforcing Steel Institute

## Other sections

- [Summary](https://www.materialinsights.org/products/p_steel_reinforcing_bar/index.md)
- [Working](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-supply/index.md)
- [Evolution](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-interventions/index.md)
