# Steel reinforcing bar: Interventions

Source page: https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-interventions/

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_steel_reinforcing_bar) Switch on levers and see what changes in India by 2036.

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Change route | Making | Make rebar in scrap or gas-DRI electric furnaces instead of blast furnaces | 1.8 to 2.0 tCO2 per tonne for electric furnace rebar against 2.7 to 3.0 for blast furnace rebar in India ^[7] | Deployed; about 70% of Indian rebar is already electric furnace | About 70% of India's rebar ^[7] | Rebar producers, scrap and DRI suppliers | ^[7] |
| Electrify | Making | Buy captive or group-captive renewable power for electric furnaces | Cuts emissions without changing the process; power costs Rs 5 to 7 per kWh against Rs 8 to 12 from the grid ^[7] | Deployed | Not stated | Furnace operators, power developers | ^[7] |
| Efficiency | Making | Efficient furnaces, waste-heat recovery and rolling mill upgrades | 8 to 10% lower energy intensity ^[7] | Deployed | Not stated | Producers | ^[7] |
| Circularity | Supply chain | Collect and sort more domestic scrap, with urban scrap hubs, and raise scrap share | Each tonne of scrap saves about 1.1 t of iron ore, 630 kg of coking coal and 55 kg of limestone ^[7]; a scrap charge of at least 60% is proposed as a green-steel threshold | Piloted and proposed; the 2019 scrap policy has no binding targets | Domestic scrap about 25 Mt in FY24 plus 9 Mt imported ^[7] | Government, scrap aggregators, producers | ^[7] |
| Change route | Making | Hydrogen-based direct reduction and carbon capture | Described as critical beyond 2040 for near-zero steel; intensity could fall below 1 tCO2 per tonne by 2030 and near 0.5 by 2035 for TMT rebar ^[7] | Research and pilot | None found for rebar | Integrated steel makers, hydrogen suppliers | ^[7] |
| Design | Components design | Specify higher-yield bars (Fe 550D in place of Fe 415) where design allows | About 25% less steel area for the same tensile force, since 415 / 550 = 0.755 (calculated from yield stress; crack width and deflection limits may reduce this) | Deployed; the grades exist in IS 1786 ^[8] | Not stated | Structural designers, code writers | ^[8] |
| Substitute | Components design | Use glass-fibre reinforced polymer bars where corrosion governs | Claimed not to corrode, but modulus 6,500 to 8,700 ksi against 29,000 ksi for steel, 1.1% elongation, and tensile strength at bends reduced by 40% ^[17]; no emissions comparison found | Deployed in niche uses | Not stated | Designers, standards bodies | ^[17] |
| Business model | Supply chain | Buy certified green rebar with a price premium | Effective green premium of about 3 to 5%, against the 10 to 15% producers often expect ^[7] | Piloted | Not stated | Developers, public clients, producers | ^[7] |

as of 2026-11-16

#### Sources

1. [The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment](https://www.bmtpc.org/DataFiles/CMS/file/PDF_Files/BMTPC_RMI_steel_rebar_w.pdf) RMI India Foundation with BMTPC and Lodha Foundation, 2025
2. [IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement (with Amendment 1, 2012)](https://law.resource.org/pub/in/bis/S03/is.1786.2008.pdf) Bureau of Indian Standards, copy on law.resource.org, 2008
3. [Performance Comparison Steel Rebar vs GFRP in Reinforced Concrete Structures (Faza, Russo and Geber)](https://www.tac-atc.ca/wp-content/uploads/Steel-Rebar-vs-GFRP-Performance-Comparison.pdf) Transportation Association of Canada (host)

## Other sections

- [Summary](https://www.materialinsights.org/products/p_steel_reinforcing_bar/index.md)
- [Working](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_steel_reinforcing_bar/prod-evolution/index.md)
