# Syringe: Bill of materials

Source page: https://www.materialinsights.org/products/p_syringe/prod-bom/

#### About these figures

Which unit, study and year the composition figures describe, and how they vary

The only parts table found is for one 50 ml Luer-Lock syringe (BD Plastipak) in a Dutch intensive care study (2022): polypropylene plunger rod and barrel, a bromobutyl rubber stopper and plastic and paper packaging, 33.4 g in all ^[6]. It is not representative: small 2 ml to 10 ml syringes weigh far less. A needle is not included; needles are a separate product, not yet a node.

as of 2026-11-13

#### Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| [PP Polypropylene](https://www.materialinsights.org/chemicals/polypropylene/) | Structural | 28.2 g | **84.4%** |
| Plunger rod 11.0 g and barrel 17.2 g of one 50 ml Luer-Lock syringe; sum and share of 33.4 g calculated ^[6]. |  |  |  |
| [LLDPE Polyethylene (LDPE, LLDPE)](https://www.materialinsights.org/chemicals/polyethylene/) | Consumable | 0.8 g | **2.4%** |
| Low-density polyethylene is 80% of the 1.0 g plastic packaging film; share of 33.4 g calculated ^[6]. |  |  |  |
| [PA Nylon (PA6, PA66)](https://www.materialinsights.org/chemicals/nylon/) | Consumable | 0.2 g | **0.6%** |
| Polyamide 6 is 20% of the 1.0 g plastic packaging film; share of 33.4 g calculated ^[6]. |  |  |  |

Indicative · as of 2026-11-13. One syringe only: the only parts table found is for a 50 ml Luer-Lock ICU syringe (BD Plastipak) in a Dutch thesis, which is far heavier than the 2 ml to 10 ml syringes most often used, so the amounts are not representative. Its bromobutyl rubber stopper (3.2 g) and paper packaging (1.0 g) have no node [6].

#### Sources

1. [Reducing the environmental impact of syringes in the Intensive Care Unit](https://repository.tudelft.nl/file/File_c66966d4-0189-4a84-aef0-e8db8d1a46a2) TU Delft (master thesis, Margot Honkoop), 2022, Table 4 and section 6.2

## Other sections

- [Summary](https://www.materialinsights.org/products/p_syringe/index.md)
- [Working](https://www.materialinsights.org/products/p_syringe/prod-working/index.md)
- [Use case](https://www.materialinsights.org/products/p_syringe/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_syringe/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_syringe/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_syringe/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_syringe/prod-interventions/index.md)
