# Vehicle wiring harness: Interventions

Source page: https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Substitute | Components design | Use aluminium instead of copper for conductors | Could cut harness weight by about 10 to 20% ^[2] (10 to 15% in TE Connectivity's own 2013 estimate ^[11]); but an Indian life cycle study found aluminium harnesses emit more than copper ones at manufacture ^[16], and a 2008 study found the fuel saved in use was cancelled by the higher impact of production ^[15] | Deployed in a small share: about 5.0% of automotive wiring in 2018 | 5.0% of wiring in 2018; 7.5% forecast for 2023 ^[2] | Harness makers, carmakers | ^[2]^[11]^[15]^[16] |
| Circularity | Making | Use recycled copper in conductors | Aptiv says its recycled copper saves about 72%, or 17 kg CO2e, per typical high-voltage harness ^[17]; an Indian study finds 17% lower harness emissions by 2032 with recycled copper and more renewable power ^[16] | Piloted: Aptiv's recycled copper passed validation tests in 2022 ^[34] | Not found | Harness makers, wire suppliers, carmakers | ^[16]^[17]^[34] |
| Design | Components design | Redesign the harness to be lighter and simpler, for example with zonal layouts | Aptiv says its Smart Vehicle Architecture cuts harness weight by more than 25% ^[34] | Deployed at some makers | Not found | Carmakers, harness makers | ^[34] |
| Use less | Components design | Use flat flexible cable with less copper in place of round wire | Assessed for an engine harness as an alternative with less copper; no saving figure is in the abstract ^[14] | Research | Not found | Harness makers | ^[14] |
| Efficiency | Use | Cut vehicle mass by lightening the harness | A 10% cut in vehicle weight can improve fuel economy by 6 to 8% ^[18]; a harness is a small part of a car's weight, so the saving per harness is small | Deployed | Not found | Carmakers | ^[18] |
| Change route | Making | Automate more of harness assembly | Automation is no more than about 10% in large parts of harness making and about 90% in one Audi demonstrator ^[19]; no emissions effect is given | Piloted | No more than about 10% ^[19] | Harness makers, carmakers | ^[19] |
| Circularity | End of life | Remove the main harness before shredding the car | Removing about half of the main harness, together with electric motors in battery electric cars, could cut copper in steel scrap from about 0.4% to about 0.2% ^[12] | Proposed in a study for EU rules | Not found | Recyclers, regulators | ^[12] |

as of 2026-11-15

#### Sources

1. [What lies ahead for the automotive harness industry? (white paper, Wire and Cable Conference 2019)](https://events.crugroup.com/wireandcable/Uploads/CRU white paper - What lies ahead for the automotive harness industry.pdf) CRU Group, 2019
2. [TE Connectivity Driving Weight Out of Vehicle Connectors](https://www.wardsauto.com/vehicles/te-connectivity-driving-weight-out-of-vehicle-connectors) Wards Auto (Byron Pope), 2013
3. [Setting recycled-content targets for steel under the ELV Regulation (briefing)](https://www.transportenvironment.org/uploads/files/2025_04_Briefing_Recycled_content_impact_study_ELV.pdf) Transport and Environment, 2025
4. [Electrical and electronic components in the automotive sector: Economic and environmental assessment](https://bvbvf1.bib-bvb.de/vufind/PrimoRecord/cdi_proquest_miscellaneous_20679144) The International Journal of Life Cycle Assessment 12(5) (Dose, Alonso, Fleischer and others), 2007
5. [Sustainable Electrical and Electronic System for the Automotive Sector: SEES (FISITA2008/F2008-09-005)](https://go.fisita.com/store/papers/FISITA2008/F2008-09-005) FISITA, 2008
6. [Life Cycle Assessment of Automotive Cables and GHG Emission Reduction Scenario in Indian Context (SAE 2026-26-0240)](https://trid.trb.org/View/2761885) SAE International, via TRID (Kumar, Bawase and Thipse), 2026
7. [Recycled Copper Could Help OEMs Meet Sustainability Goals](https://aptiv.com/en/insights/article/recycled-copper-could-help-oems-meet-sustainability-goals) Aptiv, 2022
8. [Lightweight Materials for Cars and Trucks](https://www.energy.gov/eere/vehicles/vehicle-technologies-office-lightweight-materials-cars-and-trucks) US Department of Energy, Vehicle Technologies Office
9. [How the harness is being reinvented](https://www.automotivemanufacturingsolutions.com/analysis/how-the-harness-is-being-reinvented/2732226) Automotive Manufacturing Solutions (Timo Gilgen), 2026
10. [Sustainability in Motion: 2023 Sustainability Summary Report](https://www.aptiv.com/docs/default-source/sustainability-report/2023_Aptiv_SustainabilityReport_Summary.pdf) Aptiv, 2023

## Other sections

- [Summary](https://www.materialinsights.org/products/p_vehicle_wiring_harness/index.md)
- [Working](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_vehicle_wiring_harness/prod-evolution/index.md)
