# Wind turbine tower

The steel or concrete column that holds a wind turbine's rotor high in the wind.

Source page: https://www.materialinsights.org/products/p_wind_turbine_tower/

Energy equipment · No. 31
 Energy equipment · Product

In Vestas's 2025 study of a 4.5 MW wind plant, the tower causes 31% of the plant's climate impact, more than any other part.

Chart: Illustration: Wind turbine tower

##### Where it comes from

Chart: Map of where it comes from

Early Danish turbines stood on lattice towers; Nordtank derived a tubular tower from rolled tanker skins, and Windmatic added tubular towers in 1982. By 2011 ArcelorMittal put the share of installed turbines with heavy-plate towers at about 85%, and GE and Nordex now offer concrete hybrids at 150 to 164 m.

##### Three things to know

1. A 120.9 m tubular tower for the GE 158 turbine has six sections up to 4.3 m wide, weighing about 46 to 68 tonnes each, so about 351 tonnes of steel together (calculated).
2. A Siemens Gamesa study of 165 m towers found hybrid concrete and steel towers have about 40% lower life-cycle emissions than conventional steel towers.
3. Since 31 July 2025 India's ALMM Wind rules require turbine makers to source key parts, including towers, from approved domestic suppliers.

##### The journey

1. 1 **Steel plate**Heavy plate, mostly S355 grade, from blast furnace or scrap-based arc furnace steel
2. 2 **Rolling and welding**Plates are rolled into rings and welded into sections up to about 28 m long
3. 3 **Flanges and coating**Forged flanges are welded on, then the shell is coated and fitted with internals
4. 4 **Road transport**Sections up to 4.3 m wide travel to the site by truck
5. 5 **Erection**Sections are bolted flange to flange, with the nacelle and rotor on top
6. 6 **End of life**Steel goes back to scrap; Vestas models 93.2% recycled

[Try this in What if](https://www.materialinsights.org/analyse/what-if/?p=p_wind_turbine_tower) Switch on levers and see what changes in India by 2036.
 Covered in [Vibration, waves and resonance in machines and structuresEngineering](https://www.materialinsights.org/learn/engineering/vibration-and-waves/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Working](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-evolution/index.md)
- [Interventions](https://www.materialinsights.org/products/p_wind_turbine_tower/prod-interventions/index.md)
