# X-ray apparatus: Interventions

Source page: https://www.materialinsights.org/products/p_x_ray_apparatus/prod-interventions/

#### Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Efficiency | Use | Switch machines to Off or low-power mode at night and at weekends | COCIR says Off and low-power modes could save 50.5% to 64.3% of daily energy, and Off mode at night and weekends about 3.45 MWh a year per machine ^[5]^[6] | Deployed (the modes exist) | COCIR says the modes are not widely used by users ^[6] | Hospitals and imaging centres | ^[5]^[6] |
| Efficiency | Components design | Fit a standby mode that cuts power while the system is idle | GE HealthCare says standby cuts energy use by 40% against scan mode on the Definium Pace Select ^[11] | Deployed | Not stated | Makers | ^[11] |
| Circularity | End of life | Refurbish old units and harvest parts for reuse | MEPA puts the refurbishment potential of an X-ray unit at 60% (Table 6 value); GE HealthCare says 94% to 96% of most of its systems are reused, refurbished or recycled ^[4]^[11] | Deployed | Makers run take-back programmes; no share of units refurbished found ^[3]^[12] | Makers, service firms, hospitals | ^[3]^[4]^[11]^[12] |
| Design | Components design | Use steel instead of lead in wall stands and tube stands | Removes lead from those parts; GE HealthCare cites worker safety and environmental impact, with no mass or emissions figure ^[11] | Deployed (GE HealthCare designs) | Not stated | Makers | ^[11] |
| Business model | End of life | Manufacturer take-back and refurbishment programmes | Systems and components are taken back, refurbished and reused where possible ^[3]^[12]; no energy or emissions saving per unit found | Deployed | Not stated | Makers | ^[3]^[12] |

as of 2026-11-14

#### Sources

1. [MULTIX Impact | Environmental Product Declaration](https://storage.mtender.gov.md/get/d0c165f0-027a-426e-bc8b-fcbefcd19fa1-1724056431740) Siemens Healthcare GmbH (copy held on the Moldovan public procurement portal MTender; no copy found on Siemens Healthineers' own site), 2022
2. [Medical Imaging Equipment: State of Sustainability Research (final, 16 June 2022)](https://globalelectronicscouncil.org/medical-imaging-equipment-state-of-sustainability-research) Global Electronics Council for the Medical Equipment Proactive Alliance (MEPA), 2022, Table 6 and section 2
3. [COCIR Guidelines for Users on Saving Energy: Good Environmental Practice (X-ray, October 2015)](https://dev.cocir.org/wp-content/uploads/COCIR_Guidelines_for_users_for_saving_energy_-_X-ray_Sept2015.pdf) COCIR, 2015
4. [COCIR Self-Regulatory Initiative for the Ecodesign of Medical Imaging Equipment: Status Report 2018](https://www.cocir.org/wp-content/uploads/COCIR_SRI_Status_Report_2018_-_June_2019.pdf) COCIR, 2018, Section 4.4
5. [Focusing on sustainability in X-ray solutions: Definium Pace Select (JB25106XX)](https://Www.Gehealthcare.Com/-/jssmedia/gehc/us/files/about-us/sustainability/reports/brochure-environmental-collateral-definiumpace-jb25106xx.pdf?rev=-1) GE HealthCare, 2023
6. [OEC One CFD: Compact mobile C-arm (JB33343XX)](https://www.gehealthcare.com/-/jssmedia/gehc/us/files/about-us/sustainability/reports/oec-one-cfd-c-arm-sustainability.pdf?rev=-1) GE HealthCare, 2025

## Other sections

- [Summary](https://www.materialinsights.org/products/p_x_ray_apparatus/index.md)
- [Working](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-working/index.md)
- [Bill of materials](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-bom/index.md)
- [Use case](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-use/index.md)
- [Supply chain](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-supply/index.md)
- [Footprint](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-footprint/index.md)
- [Evolution](https://www.materialinsights.org/products/p_x_ray_apparatus/prod-evolution/index.md)
