# Beam theory

How beams bend and carry loads, the basis for sizing frames, bridges and floors.

Source page: https://www.materialinsights.org/science/beam_theory/

Physics · Classical mechanics · No. 14

- Medieval and early modern
- Science
 Physics · The science behind technology

Jacob Bernoulli's 1694 law of the bent strip was right about curvature but put the unstretched line in the wrong place, on its inner face.

Chart: Illustration: Beam theory

##### Where it comes from

Chart: Map of where it comes from

Galileo worked on the strength of a loaded beam in 1638. Jacob Bernoulli in Basel published his law of the bent elastic strip in 1694, and Euler gave the complete solution in 1744.

##### Three things to know

1. In a bent beam the curvature at each point is in proportion to the bending moment there, and inversely to the beam's stiffness.
2. In an October 1742 letter, Daniel Bernoulli suggested the problem to Euler, who solved it in 1744.
3. The simple theory assumes small deflections and that flat cross-sections stay flat as the beam bends.

##### The journey

1. 1 **Problem**Galileo asks how strong a beam loaded at one end is, 1638
2. 2 **Bending law**Jacob Bernoulli ties the bend to the moment of the load, 1694
3. 3 **Letter**Daniel Bernoulli suggests a way into the general problem, 1742
4. 4 **Solution**Euler publishes the complete theory of the bent strip, 1744
5. 5 **Use today**Sizing every floor joist, girder, frame and bridge deck
 Covered in [Structures and materials: stress, stiffness, strength and why things breakEngineering](https://www.materialinsights.org/learn/engineering/structures-and-materials/)

##### Go deeper pick a tab to open it in full

## Other sections

- [The idea](https://www.materialinsights.org/science/beam_theory/sci-idea/index.md)
- [Discovery](https://www.materialinsights.org/science/beam_theory/sci-discovery/index.md)
- [Technologies](https://www.materialinsights.org/science/beam_theory/sci-technologies/index.md)
