# Dislocations in crystals: The idea

Source page: https://www.materialinsights.org/science/dislocation_theory/sci-idea/

#### In plain words

The idea explained without jargon

In a metal crystal, atoms sit in neat rows. To bend the metal for good, one layer of atoms must slide over the next. Sliding a whole layer at once would take enormous force: a simple estimate gives about 10 GPa, yet real crystals yield at 10 to 100 MPa ^[2]. The answer is a flaw called a dislocation, the edge of an extra half-row of atoms. Under stress the dislocation moves through the crystal one row at a time, so only a few bonds break at any moment ^[2]. As a metal is worked, dislocations multiply and tangle, which makes it harder; foreign atoms dissolved in the metal block them too, which is why many alloys are stronger than pure metals ^[2].

as of 2026-11-11

#### Key equation

The equation that sums it up, and what each symbol means

**Equation**
: tau = tau_0 + A G b sqrt(rho)

**Symbols**
: {"tau":"the shear stress needed to keep the metal flowing, in pascals","tau_0":"the stress needed with no other dislocations in the way, in pascals","A":"a constant, found to lie between 0.3 and 0.6","G":"the shear modulus, the metal's stiffness in shear, in pascals","b":"the Burgers vector, the size of the slip step a dislocation makes, in metres","rho":"the dislocation density, the length of dislocation line per volume, in metres per cubic metre"}

**Note**
: The more dislocations a metal holds, the more they get in each other's way, so the stress to deform it grows with the square root of their density ^[2]. A perfect crystal would instead need about G/2 pi, around 10 GPa ^[2].

as of 2026-11-11

#### An analogy

A picture from everyday life that makes the idea easier to hold

Moving a large rug by dragging it is hard, but pushing a ruck along it is easy: the rug shifts a little at a time. A dislocation is that ruck in a crystal. The picture stops being true because a crystal has many slip planes, and rucks crossing each other jam, which is just how metals harden.

as of 2026-11-11

#### Sources

1. [6.2: Dislocation Basis of Yield and Creep](https://eng.libretexts.org/Bookshelves/Mechanical_Engineering/Mechanics_of_Materials_(Roylance)/06%3A_Yield_and_Fracture/6.02%3A_Dislocation_Basis_of_Yield_and_Creep) David Roylance, MIT, Mechanics of Materials, on Engineering LibreTexts

## Other sections

- [Summary](https://www.materialinsights.org/science/dislocation_theory/index.md)
- [Discovery](https://www.materialinsights.org/science/dislocation_theory/sci-discovery/index.md)
- [Technologies](https://www.materialinsights.org/science/dislocation_theory/sci-technologies/index.md)
