# Fracture mechanics: Discovery

Source page: https://www.materialinsights.org/science/fracture_mechanics/sci-discovery/

#### The story

How the idea was found and came to be accepted

Engineers had long seen that sharp corners start failures: in 1843 William Rankine advised rounded corners in castings after railway axles broke ^[4]. The deeper puzzle was why solids break at so low a stress. Alan Griffith, at the Royal Aircraft Establishment, studied glass. His paper, published in 1920, argued that the weakness of ordinary solids comes from flaws, and that a crack grows when the energy it frees pays for its new surface ^[1, 2]. He estimated that the glass's strength without such flaws was of the order of a million pounds per square inch, against 24,900 measured in ordinary tension tests ^[1]. The idea was first thought to apply only to brittle solids such as glass ^[3]. Then welded Liberty ships cracked in World War II and Comet airliners broke apart in the 1950s ^[2]. George Irwin, who led the brittle fracture project at the Naval Research Laboratory from 1946, extended the theory to metals and in the early 1950s introduced the stress intensity factor ^[2, 5].

as of 2026-11-10

#### People

The people behind it, their years and what each contributed

| Name | Years | Contribution |
|---|---|---|
| Alan Arnold Griffith | 1893 to 1963 | Explained the weakness of solids by the energy balance of a growing crack, 1920 ^[1, 6] |
| George R. Irwin | 1907 to 1998 | Extended Griffith's idea to metals and introduced the stress intensity factor ^[2, 5] |

as of 2026-11-10

#### Milestones

The key moments, year by year

| Year | Event |
|---|---|
| 1843 | William Rankine recommends rounded corners in castings after railway axle failures ^[4] |
| 1920 | Griffith publishes his energy criterion for crack growth ^[1, 2] |
| 1946 | Irwin takes charge of the Naval Research Laboratory's brittle fracture project ^[5] |
| 1957 | Williams works out the stress field at a crack tip ^[4] |
| 1963 | Paris and Erdogan publish their law for how fatigue cracks grow ^[4] |

as of 2026-11-10

#### Sources

1. [The Phenomena of Rupture and Flow in Solids](https://ia802702.us.archive.org/31/items/philtrans01457975/01457975.pdf) A. A. Griffith, Philosophical Transactions of the Royal Society of London, Series A, vol. 221 (scan on the Internet Archive), 1920, pp. 163 to 198
2. [Catastrophic Failures Propagate Field of Fracture Mechanics](https://core-prod.cambridgecore.org/core/services/aop-cambridge-core/content/view/765F8BF1550301554A2CB1467F3350A6/S0883769400045176a.pdf/catastrophic-failures-propagate-field-of-fracture-mechanics.pdf) Robin L. Blumberg Selinger, MRS Bulletin (Historical Note), August 1995, 1995, p. 74
3. [Mechanics of solids: Stress concentrations and fracture](https://www.britannica.com/science/mechanics-of-solids/Stress-concentrations-and-fracture) Encyclopaedia Britannica
4. [Science of Cracks: Fracture Mechanics](https://strathprints.strath.ac.uk/84790/1/Oterkus_IES_JE_2022_Science_of_cracks.pdf) Erkan Oterkus, PeriDynamics Research Centre, University of Strathclyde (Strathprints repository)
5. [George R. Irwin](https://www.nationalacademies.org/read/10403/chapter/28) James W. Dally, in Memorial Tributes: Volume 10, National Academy of Engineering, 2002, pp. 146 to 153
6. [Griffith; Alan Arnold (1893 - 1963)](https://catalogues.royalsociety.org/CalmView/rdf/persons/NA1700) Royal Society archive catalogue (Fellows record)

## Other sections

- [Summary](https://www.materialinsights.org/science/fracture_mechanics/index.md)
- [The idea](https://www.materialinsights.org/science/fracture_mechanics/sci-idea/index.md)
- [Technologies](https://www.materialinsights.org/science/fracture_mechanics/sci-technologies/index.md)
