# Heat conduction (Fourier's law): Technologies

Source page: https://www.materialinsights.org/science/heat_conduction/sci-technologies/

#### Technologies

The technologies that rely on it, and how each one uses it
 Limits 27

- [Bld Energy in buildings](https://www.materialinsights.org/technologies/e_buildings/) Heat leaks through walls, roofs and windows by conduction, so their insulation sets how much heating or cooling a building needs.
- [Can Canning](https://www.materialinsights.org/technologies/canning/) Heat must travel to the cold centre of the can, so large cans and thick foods need longer processing to be safe.
- [Gl Glassmaking](https://www.materialinsights.org/technologies/glassmaking/) Glass conducts heat poorly, so its surface and core cool at different rates and it must be annealed slowly.
- [Pot Fired pottery](https://www.materialinsights.org/technologies/pottery_firing/) Heat soaks slowly through a clay wall, so pieces must be dried and fired gently or uneven expansion cracks them.
- [Cst Metal casting (lost wax)](https://www.materialinsights.org/technologies/lost_wax_casting/) How fast heat flows out through the mould decides where the metal sets first, and so where shrinkage holes and weak spots form.
- [3DP Additive manufacturing (3D printing)](https://www.materialinsights.org/technologies/additive_manufacturing/) In powder melting, heat must flow away from each melted track before the next, which limits build speed and causes stresses in the part.
- [Wld Arc welding](https://www.materialinsights.org/technologies/arc_welding/) Heat flows from the weld pool into the metal around it, changing its structure in a heat-affected zone; metals that conduct heat well, such as aluminium and copper, need more heat to weld.
- [AGS Advanced geothermal](https://www.materialinsights.org/technologies/e_adv_geo/) Heat reaches a closed loop only by slow conduction through solid rock, which caps the power each well can give.
- [DHN District heating and cooling networks](https://www.materialinsights.org/technologies/e_district_heat_net/) Heat leaks from the hot pipe through its insulation, as Fourier's equation describes; lowering a network's temperatures from 80/45 °C to 55/25 °C would cut that loss by about 43%.
- [HTF Heat-transfer fluids and heat pipes](https://www.materialinsights.org/technologies/e_heat_carriers/) Fourier's theory of heat conduction of 1822 describes the slow flow of heat through solids; a carrier beats it, and a heat pipe can be several thousand times more effective than the best metals.

Show 17 more

- [PCM Latent heat and cold storage](https://www.materialinsights.org/technologies/e_latent_heat/) Waxes and fatty acids conduct heat poorly, so heat moves slowly into and out of the store, the flow Fourier described in 1822.
- [SHS Sensible heat storage](https://www.materialinsights.org/technologies/e_sensible_heat/) Heat leaks out of every store through its walls and moves slowly through rock and soil, the flow Fourier described in work completed in 1822; insulation and size set how long a store keeps its heat.
- [TCS Thermochemical storage](https://www.materialinsights.org/technologies/e_thermochem_store/) Salt hydrates conduct heat poorly and water vapour moves slowly through their grains, which slows charging and discharging; composites are made to overcome this.
- [IM Injection moulding](https://www.materialinsights.org/technologies/injection_moulding/) The part can leave the mould only when its heat has flowed into the cold metal, so cooling sets much of the length of each cycle.
- [AI accelerator chip](https://www.materialinsights.org/products/p_ai_accelerator_chip/) Nearly all the electricity a chip uses ends as heat, which must conduct out through the package to a heat sink or liquid.
- [Clay brick](https://www.materialinsights.org/products/p_clay_brick/) Heat must soak into thick, dense bricks, so drying and firing take hours to days and set the energy bill.
- [Data-centre server](https://www.materialinsights.org/products/p_data_centre_server/) Heat has to flow from chips through heat sinks and heat pipes into moving air, which sets how hot a chip may run.
- [Electric water heater](https://www.materialinsights.org/products/p_electric_water_heater/) Heat leaks through the tank wall and insulation, which sets the standing loss.
- [Heat pump](https://www.materialinsights.org/products/p_heat_pump/) Heat has to cross the walls of the two heat exchangers, which sets their size and the temperature gap between refrigerant and air or water.
- [Industrial boiler](https://www.materialinsights.org/products/p_industrial_boiler/) Heat must pass through tube walls and scale, which sets the surface area needed for a given output.
- [Machine tool](https://www.materialinsights.org/products/p_machine_tool/) Cutting work ends as heat in the chips, tool and machine, and the frame must stay accurate as it warms.
- [Power semiconductor module](https://www.materialinsights.org/products/p_power_semiconductor_module/) Heat from the chips must conduct through the ceramic and baseplate, which caps the current a module can carry.
- [Printed circuit board](https://www.materialinsights.org/products/p_printed_circuit_board/) Heat from current and from soldering must leave through the laminate, which softens above its glass transition temperature.
- [Refrigerator](https://www.materialinsights.org/products/p_refrigerator/) Heat leaking through the walls and door gaskets sets how often the compressor must run, which is why foam insulation matters.
- [Variable speed drive](https://www.materialinsights.org/products/p_variable_speed_drive/) Switching and conduction losses must flow through the heat sink, which sets how much power a frame can carry.
- [Vehicle wiring harness](https://www.materialinsights.org/products/p_vehicle_wiring_harness/) Current heats a wire, and the heat must flow away through the insulation, which must withstand it; this is why wiring near the engine needs heat-resistant compounds.
- [QF Quick freezing of food](https://www.materialinsights.org/technologies/quick_freezing/) Heat must flow out from the centre of the food to its surface, so thick blocks, poor contact with freezer plates and wrapping all lengthen freezing.
 Relied on by 27

- [Pas Passive solar and natural cooling](https://www.materialinsights.org/technologies/e_passive/) Insulation slows heat flow, while heavy walls and floors take heat in and let it out slowly, smoothing the swing between day and night.
- [MB Mud brick](https://www.materialinsights.org/technologies/mud_brick/) Thick earth walls let heat through slowly, which keeps rooms cooler by day and warmer by night in dry climates.
- [HX Heat exchangers and pinch integration](https://www.materialinsights.org/technologies/e_heat_exchangers/) Heat passes from one fluid to another through a thin metal wall, so a large area and a thin, conductive wall move more heat.
- [Rcp Recuperators and regenerators](https://www.materialinsights.org/technologies/e_recuperators/) Hot exhaust gives up heat through metal or ceramic walls to the incoming air, at a rate set by the wall area and the temperature difference.
- [Eco Boiler heat recovery](https://www.materialinsights.org/technologies/e_boiler_recovery/) An economiser passes flue gas over tubes so that its heat conducts through the tube walls into the feed water.
- [HRV Building heat recovery](https://www.materialinsights.org/technologies/e_building_recovery/) A heat recovery unit passes outgoing and incoming air on either side of thin plates, so heat conducts from the warm stream to the cold one.
- [CDQ Steel plant energy recovery](https://www.materialinsights.org/technologies/e_steel_recovery/) Recovering heat from hot gases and products means passing it through exchanger walls, whose area and conductivity limit how much is caught.
- [Blr Boilers, furnaces and stoves](https://www.materialinsights.org/technologies/e_combustion_heat/) Heat passes from hot gas through metal walls into water or a pot, so the area and cleanliness of those surfaces set efficiency.
- [HTF Heat-transfer fluids and heat pipes](https://www.materialinsights.org/technologies/e_heat_carriers/) Heat must conduct through the walls of pipes and heat pipes into and out of the fluid that carries it.
- [DHN District heating and cooling networks](https://www.materialinsights.org/technologies/e_district_heat_net/) Hot water pipes lose heat by conduction through their insulation, which sets how far heat can be sent.

Show 17 more

- [SHS Sensible heat storage](https://www.materialinsights.org/technologies/e_sensible_heat/) How fast a store of rock, water or concrete can be charged or emptied depends on how quickly heat conducts into and out of it.
- [WHU Waste heat for drying, water and food](https://www.materialinsights.org/technologies/e_waste_heat_uses/) Drying, water heating and food processing with waste heat all depend on moving that heat through the walls of exchangers and dryers into the product.
- [Shr Shared and district heat reuse](https://www.materialinsights.org/technologies/e_shared_heat/) Heat recovered from one site reaches its users through exchanger walls and insulated pipes, so conduction sets both how much is caught and how much leaks on the way.
- [SHC Solar heat collectors](https://www.materialinsights.org/technologies/e_solar_heat/) The absorber plate conducts the heat of sunlight to the fluid tubes, while insulation behind it keeps the heat from leaking away.
- [GSH Geothermal direct use and ground-source heat pumps](https://www.materialinsights.org/technologies/e_geo_direct/) Ground-source loops gather heat that flows slowly by conduction through the soil and rock around the borehole.
- [AGS Advanced geothermal](https://www.materialinsights.org/technologies/e_adv_geo/) Heat reaches the fluid in deep wells by conduction through hot rock, which limits how much can be drawn from each well.
- [DC Data centres](https://www.materialinsights.org/technologies/e_data_centres/) Heat has to flow from each chip through heat sinks or cold plates into air or water, which sets how densely chips can be packed.
- [Pst Pasteurisation](https://www.materialinsights.org/technologies/pasteurisation/) Continuous pasteurisers pass milk in thin layers between steel plates so that heat moves in and out within seconds.
- [UHT Aseptic packaging (UHT)](https://www.materialinsights.org/technologies/aseptic_processing/) Food is heated and cooled in thin streams through heat exchangers, so short conduction paths let it reach a high temperature for only a short time.
- [QF Quick freezing of food](https://www.materialinsights.org/technologies/quick_freezing/) Heat must conduct out from the centre of the food, so thin pieces and very cold surfaces freeze it fast.
- [EDM Electrical discharge machining](https://www.materialinsights.org/technologies/electrical_discharge_machining/) Each spark heats a spot enough to vaporise it; copper electrodes wear less than brass because of their high thermal conductivity and melting point.
- [Lin Hot-metal typesetting](https://www.materialinsights.org/technologies/hot_metal_typesetting/) The Linotype brings its copper matrices into brief contact with a molten but fast-cooling alloy: heat flows quickly into the cooler moulds, so each line sets in moments.
- [OH Open-hearth steelmaking](https://www.materialinsights.org/technologies/open_hearth_steelmaking/) The regenerator bricks soak up heat from the exhaust and pass it to the incoming air and gas when the flow is reversed.
- [Heat exchanger](https://www.materialinsights.org/products/p_heat_exchanger/) Heat crosses each thin metal plate by conduction, so thin plates of conductive steel pass heat well.
- [Insulating glass unit](https://www.materialinsights.org/products/p_insulating_glass_unit/) The still gas in the sealed gap conducts little heat, and argon conducts less than air.
- [Mineral wool insulation](https://www.materialinsights.org/products/p_mineral_wool_insulation/) The mat works by slowing conduction: thin fibres and trapped still air give a low thermal conductivity.
- [Plastic foam insulation board](https://www.materialinsights.org/products/p_plastic_foam_insulation_board/) Fourier's law sets heat flow as conductivity times temperature difference over thickness, so low-conductivity cells in a thick board cut it.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/science/heat_conduction/index.md)
- [The idea](https://www.materialinsights.org/science/heat_conduction/sci-idea/index.md)
- [Discovery](https://www.materialinsights.org/science/heat_conduction/sci-discovery/index.md)
