# Ohm's law: Technologies

Source page: https://www.materialinsights.org/science/ohms_law/sci-technologies/

#### Technologies

The technologies that rely on it, and how each one uses it
 Limits 14

- [Tel Electric telegraph](https://www.materialinsights.org/technologies/electric_telegraph/) A long line resists the current, so the signal fades with distance and long lines needed relays or stronger batteries.
- [SCb Submarine communications cable](https://www.materialinsights.org/technologies/submarine_cable/) The resistance of thousands of kilometres of copper weakened telegraph signals, so cables needed very sensitive receivers.
- [Gen Generators and alternators](https://www.materialinsights.org/technologies/e_generators/) Current through the resistance of the copper windings turns some power into heat, a main loss in large machines.
- [Mot Electric motors and drives](https://www.materialinsights.org/technologies/e_motors/) Resistance in the copper or aluminium windings turns part of the current into heat, often the largest single loss.
- [PE Transformers and power electronics](https://www.materialinsights.org/technologies/e_power_electronics/) Winding and switch resistance turn part of the current into heat, rising with the square of the current.
- [PF Electrical loss reduction](https://www.materialinsights.org/technologies/e_electrical_recovery/) Current through a resistance always makes heat, so some loss is unavoidable; Ohm published the law in 1827.
- [HVAC AC transmission](https://www.materialinsights.org/technologies/e_hvac/) The resistance of the wires turns part of the power into heat; together with distribution, about 5% of US electricity was lost this way in 2018 to 2022.
- [Ceiling fan](https://www.materialinsights.org/products/p_ceiling_fan/) Current through the winding and rotor wastes power as heat; a BLDC rotor carries no current, which removes the rotor loss.
- [Electric generator](https://www.materialinsights.org/products/p_electric_generator/) Current in the copper windings loses power as heat, which sets the efficiency and the cooling needed.
- [Electric motor](https://www.materialinsights.org/products/p_electric_motor/) Resistance in the copper windings turns part of the electricity into heat.

Show 4 more

- [EV charger](https://www.materialinsights.org/products/p_ev_charger/) Current in cables and switches wastes energy as heat, which sets the cooling needed at high power.
- [Insulated power cable](https://www.materialinsights.org/products/p_insulated_power_cable/) Resistance in the conductor turns current into heat, so heat limits the current a cable can carry.
- [Lithium-ion battery](https://www.materialinsights.org/products/p_lithium_ion_battery/) Internal resistance turns part of every charge and discharge into heat, which is why round-trip efficiency always stays below perfect.
- [Transformer and power converter](https://www.materialinsights.org/products/p_transformer_and_power_converter/) Current in the windings loses power as heat, which sets the load loss.
 Relied on by 11

- [Tlp Telephone](https://www.materialinsights.org/technologies/telephone/) The carbon transmitter changes its resistance as the voice presses on it, so the current changes in step with the sound.
- [EH Electric heating](https://www.materialinsights.org/technologies/e_electric_heat/) A heating element turns current into heat at a rate set by its resistance and the square of the current, which fixes how elements are sized.
- [EAF Electric arc furnace](https://www.materialinsights.org/technologies/electric_arc_furnace/) Current forced through the resistance of the arc and the charge turns into the heat that melts the steel.
- [Cab Underground, submarine and superconducting cables](https://www.materialinsights.org/technologies/e_cables/) A cable's resistance sets the voltage drop and the heat for a given current, so conductor size is chosen from Ohm's law.
- [Dist Distribution grids, mini-grids and interconnectors](https://www.materialinsights.org/technologies/e_distribution/) Transformers raise the voltage so less current carries the same power, which cuts the heat lost in the lines' resistance.
- [HVDC HVDC links](https://www.materialinsights.org/technologies/e_hvdc/) Very high voltage lets a line carry large power with a small current, so resistive loss over long distances stays low.
- [PF Electrical loss reduction](https://www.materialinsights.org/technologies/e_electrical_recovery/) Thicker conductors and power-factor correction cut the current or the resistance, and so the I squared R losses in wiring.
- [Electric water heater](https://www.materialinsights.org/products/p_electric_water_heater/) Current through the resistance element releases heat in it.
- [Printed circuit board](https://www.materialinsights.org/products/p_printed_circuit_board/) Copper tracks carry current with a small resistance, so track width and thickness set how much current a board can carry.
- [Smart electricity meter](https://www.materialinsights.org/products/p_smart_electricity_meter/) A voltage divider and a shunt resistor turn mains voltage and current into small signals the converter can read.
- [Vehicle wiring harness](https://www.materialinsights.org/products/p_vehicle_wiring_harness/) A wire's resistance sets how much voltage is lost along it, so the conductor's metal and cross-section fix how much current it can carry.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/science/ohms_law/index.md)
- [The idea](https://www.materialinsights.org/science/ohms_law/sci-idea/index.md)
- [Discovery](https://www.materialinsights.org/science/ohms_law/sci-discovery/index.md)
