# Additive manufacturing (3D printing): Energy footprint

Source page: https://www.materialinsights.org/technologies/additive_manufacturing/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Electricity for lasers, heaters, motors and inert gas systems

**Conversion**
: Electrical energy to light or heat that cures or melts each layer

**Note**
: No source opened gives energy per kilogram of printed part.

as of 2026-11-11

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) Printers run on electricity, and metal powder machines draw the most for their lasers and heated chambers.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/technologies/additive_manufacturing/index.md)
- [Overview](https://www.materialinsights.org/technologies/additive_manufacturing/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/additive_manufacturing/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/additive_manufacturing/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/additive_manufacturing/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/additive_manufacturing/tech-industries/index.md)
